AutoCAD Inventor :: Adding Image To Drawing File?

Apr 8, 2008

inserting or adding an image to the drawing file.. i ve the reference point and the bmp file path.. but the error "Run-time error '-2147467259(80004005) Method 'Add' of object '_IRxSketchImages' failed" is flashed.

View 6 Replies


ADVERTISEMENT

AutoCad :: Adding File Path To Drawing Border?

May 16, 2012

I would like to add at the top of my drawing border the file path for that CAD drawing.

For example:

C:Documents And SettingsNameLocal SettingsTemporary Internet FilesContent.Outlook6MI84FY33435_M_56_01 - Heating Ground Floor

This is something that I have seen in my previous employers drawing sheets but I would now like to add one to my own sheet.

I have looked into Plot Stamp command but this just seems to give me options for the date or tab name and not where the drawing is saved.

View 9 Replies View Related

AutoCAD Civil 3D :: Using Lisp To Do Drawing Cleanup - Adding DPF File To Routine

Jun 18, 2012

i've been trying to write a lisp shortcut for drawing cleanup but it keeps asking me for a profile name to load and i cant figure out how to add my .DPF file to my routine.

View 1 Replies View Related

AutoCAD Inventor :: Adding Barcode To A Drawing

Apr 8, 2010

Is there a way to add bar code to a drawing which is a translation of Drwg. #. I saw iPropWiz program but don't know if that's the way to go.

View 9 Replies View Related

AutoCAD Inventor :: Adding An Un-used Drawing Title Block Resource?

Aug 5, 2013

adding an unused template drawing title block resource. 
 
'UPDATE TITLE BLOCK SHEET 1ThisDrawing.ResourceFileName="X:TemplatesStart Drawing.idw"
ThisDrawing.KeepExtraResources=False
DimoDrawingDocAsDocument=ThisApplication.ActiveDocument
'If iProperties.Value("Custom", "V1Scale") = NullString
oDrawingDoc.ActiveSheet.TitleBlock.Delete

[code]....

View 7 Replies View Related

AutoCad :: How To Send Drawing Without Sending Its Image File Or Without Etransmit The File

Dec 8, 2011

I want to attach image in Autocad 2010, i know the procedure to insert the image (.jpg,etc.). But my problem is that i dont want to send its original image that i used from my hard disk.

Is there any way to send drawing without sending its image file or wothout doing etransmit the file.

View 1 Replies View Related

AutoCAD Inventor :: IPart Drawing Template - One Drawing File Versus Individual Drawings

Jun 21, 2013

Setting up a tabulated ipart drawing template. Which is better...one drawing file with a table or individual drawings for each tabulation? Also does one method work better than the other when introducing vault?

View 1 Replies View Related

AutoCad :: Merge Image File With Drawing File

Apr 8, 2013

Is There any way to Merge Image file With Drawing File ? I Have a Topo Sheet Which i am Inserted in Drawing File . Now the Problem is i am sending Drawing file to My Client Office Via Email . The Toposheet File Sized Is Nearly 150 MB . Is there any way to Combine Image and Drawing File.

View 4 Replies View Related

GIMP :: Adding Image To XCF File?

Nov 10, 2011

I have an image created and saved to an xcf file. The image is a text logo. Each layer is a different text word. How can bring in an image to place next to my yext? Can I open a new layer and import(or copy/paste) an image into that layer?

View 1 Replies View Related

AutoCAD Inventor :: Adding File To A Browser Folder

Jul 12, 2012

I'm using the following sample code to add files to a browser folder

Public Sub AddOccurrencesToFolder()

    Dim oDoc As AssemblyDocument     Set oDoc = ThisApplication.ActiveDocument

    Dim oDef As AssemblyComponentDefinition     Set oDef = oDoc.ComponentDefinition

    Dim oPane As BrowserPane     Set oPane = oDoc.BrowserPanes.ActivePane

 [Code]....

How do I get the files added to an existing " My Occurrence Folder" rather than creating a new one. Every time I run the code a new folder is created, it does not use the exisitng one

View 1 Replies View Related

AutoCAD Inventor :: Measurement Not Adding Up While Converting To STP File

Sep 27, 2013

After finishing a part in Inventor 2014 a want to store it as a STL file. Thats no problem but  when the part is saved as STL it measurement don't add up any more. The STL file becomes a factor 10 smaller. So 50mm ends up as 5mm. So thats a problem.

View 3 Replies View Related

Photoshop :: Adding Flash File To Image

Apr 5, 2013

I have created a banner for a website in Photoshop.  On the right side of the banner I want to have a flash file I created with transitioning imaging. I also use Dreamweaver but the banner is such that I cannot add it together in dreamweaver ,  or at least I haven't figured out how. 
 
The best way I would like to do it is in Photoshop but will the Photoshop image allow the swf file to play?  I tried to create a gif in Photoshop but that doesn't play like I would like.  I am only using three images 330 px by 248 px so it isn't huge. 

View 2 Replies View Related

AutoCAD Inventor :: Adding IParts To Assembly From File With Occurrence X / Y And Z

Dec 4, 2013

I am trying to add instances of an ipart to an assembly automatically from an excel file and need to be able to specify the occurrence x, y, and z positions.  Since the Inventor version is so old I have not been able to find the proper documentation.

View 1 Replies View Related

VideoStudio :: X3 - Adding Watermark (text Or Image) To AVI File?

Mar 23, 2012

I have a 30 second .avi file, frame size 1440 x 1080 15 frames/sec Video compression Microsoft DTV-DVD Video Decoder, 24 bits, total 450 frames Audio compression PCM 32.000 kHz, 16 bit Mono 960,000 samples.

I can play the video OK in vlc and when I insert the video into the timeline of VS X3 and play the inserted .avi.

As soon as I insert:

1. a .jpg at the start of the timeline with text and/or,

2. text (as a watermark) on bottom left hand side for the 30 second duration

whenever I play back (in VS X3 preview) this clip, the movie plays (but with a frozen first frame from the .avi) with only the audio with the text.

I have been using VS X2 successfully on my Windows 7 64-bit PC.I had purchased X3 sometime ago and decided to install my X3 version.

View 1 Replies View Related

AutoCAD Inventor :: Adding Custom Fastener Type To Clearance XLS File

Jan 24, 2013

I added a new "Standard" and "Fastener Type" to the Clearance.xls file for my Inventor 2013. This was done in an effort to create a standard set of dowel hole sizes in our design department. So far it is working, however I have a few improvements I need implementing.

Changing the "Fit" name from "Close/Normal/Loose" to "Press/Nominal/Slip" to make it more user friendly in the hole wizard.DeterminE how to create a custom hole callout in .idw drawings for this new hole type. I would like to use the Hole Callout feature and have it automatically place our specific hole information/text for the machine shop to create the hole.

Ex..
Drill and ream for 1/4" Dowel hole
Press Fit
.2495 +0 -.0005
 
I have attached the clearance.xls file we modified to get this new fastener type to show up in our hole wizard.

View 4 Replies View Related

AutoCAD Inventor :: How To Create PDF-File Of Drawing And STEP Of Connected 3D-File

Apr 11, 2012

I have a script that makes PDF-file with suffix revision. Now I want to expand this script so it even makes a STEP-file of the 3d-file connected to the drawing. This would make all manufacture files in one button. That should be nice..

How will i manage with this since the active document is the drawing not the part. (see code below)

Set oDoc = ThisApplication.ActiveDocument
Call oDoc.SaveAs("C:UsersGoranWeDesktop est estfile.stp", True)

View 9 Replies View Related

AutoCad :: JPEG Image File Convert To Drawing

May 20, 2013

today client send me one drawing which is on jpep file format so i want to convert that file into autocad so can you people refer me some go0d converting software....

View 4 Replies View Related

AutoCAD 2013 :: Drawing Preview Image Not Seen In Open File Dialog Window

Jun 1, 2012

I use Autocad since version 2.0. My THUMBSAVE value is 1.Still not showing a preview of the dwg.

View 9 Replies View Related

AutoCAD Inventor :: Get A Drawing From 3D IPT File

May 11, 2013

I did a 3D model on inventor, and now I need the drawing from the model, it is a simple axle, but I really can not figure how to do it. I have looked around, but I failed in finding an awnser. I am sure it is very simple,

View 4 Replies View Related

AutoCAD Inventor :: JPG File - Delete Third Party Image File Link?

Jun 12, 2012

We have a couple parts that are linked to a jpg file, through Inventor studio.  They were set as a reflection image, from what I can tell.  However they are now perminantly linked to the part and anything we copy from it.  I eliminated the reflection from Inventor studio, but Vault still thinks the link is there.  If we delete the jpg files it causes unresolved references and as we all know Inventor will then refuse to work until they are resolved.

Any way to get rid of this link?  We can make a new jpg, and resolve it, but not delete it.

View 9 Replies View Related

AutoCAD Inventor :: New PDF File After Updating Drawing Possible?

Aug 16, 2012

I have a drawing of a part that I want to change the dimensions many times.

When I edit the length and width in the part, the drawing updates automatically.

But is it possible to update the pdf file (of drawing) automatically after editing the dimensions in part?

 Or do I have to update (save as to pdf) everytime I create a new dimensions?

View 4 Replies View Related

AutoCAD Inventor :: Print Drawing From File

Apr 18, 2013

I've written a program that prints the drawings from an assembly. For this print to work, I have to have the drawing open (I've tried printing using the option Set doc = ThisApplication.Documents.Open(DWGName, False) but the print manager will just skip over a file that isn't open.

When I change the code to "True" Inventor wants to know if i want to check out the drawing from vault and this requires user input. Is there a way i can bypass this user input or automate an answer so the user doesn't have to constantly be clicking when batching drawings?

View 2 Replies View Related

AutoCAD Inventor :: Converting 2D Drawing In 3D File?

Mar 14, 2013

I have a autocad drawing that was clearly made from a 3D model. I cannot get the 3D file sent me. I was wonder how can I convert this drawing to a 3D file. Is anyway I can take the isometric view in the corner of the autocad drawing that i currently have and convert it to a 3D model.

View 2 Replies View Related

AutoCAD Inventor :: 2D Sketches In Drawing File?

Mar 20, 2012

Quite often we cretae schematic line drawings for clients approval before creating full 3D models for production. Is it possible to achieve this in Inventor and maybe go on to use the sketches as a master filoe to drive the design? Or should I continue to get approval based in AutoCAD and then switch over to Inventor?

View 6 Replies View Related

AutoCAD Inventor :: VBA Print Drawing From File?

Apr 12, 2013

Ive written a program in Inventor that finds all the drawings associated with a part/assembly.

it is supposed to find and open the selected drawings invisibly but for some reason the print manager wont work unless the drawing is opened and the drawing is active. In order to make the program work I have to open each drawing then close them. every time the user must input for save changes, and checking out (which is not necessary and takes forever).

Is there a way I can print without opening the drawing and making it active?

in the attached file, Ln 49-63

'Activate the selected document
Set doc = ThisApplication.Documents.Open(Archive, False)

' The only way to make it work is to change this value to True. this sends up all sorts of pop up windows.

Set osheets = doc.Sheets
For X = 1 To osheets.Count
size = osheets.item(X).size

[Code]....

View 1 Replies View Related

AutoCAD Inventor :: VBA Print Drawing From File

Apr 12, 2013

Ive written a program in Inventor that finds all the drawings associated with a part/assembly.

it is supposed to find and open the selected drawings invisibly but for some reason the print manager wont work unless the drawing is opened and the drawing is active. In order to make the program work I have to open each drawing then close them. every time the user must input for save changes, and checking out (which is not necessary and takes forever).

Is there a way I can print without opening the drawing and making it active?

'Activate the selected document
            Set doc = ThisApplication.Documents.Open(Archive, False)
           ' The only way to make it work is to change this value to True
            Set osheets = doc.Sheets
                For X = 1 To osheets.Count
                size = osheets.item(X).size
 [code]....              

View 1 Replies View Related

AutoCAD Inventor :: Drawing File Crashes

Dec 2, 2013

This morning I got to work and attempted to modify an existing drawing file per some requested changes. I figured I would open the drawing file and move some of the things around that I needed but were going to disappear after I edited the model. The end result was to remove some small items from the model and add two other small items to the model. There was some annotation in the drawing connected to the parts I was removing that I wanted to stay in the drawing file so I was editing the drawing file first. This is what happened and what I have tried since:

1.) When I went to copy a weld symbol from one view and paste it in another IV crashed.

2.) I rebooted, attempted again, IV crashed.

3.) I rebooted, attempted to add a new weld symbol and delete the other (instead of copy/paste), IV crashed.

4.) I installed the windows updates my computer was telling me I needed to install (.NET 4.5.1).

5.) I rebooted, attempted again, IV crashed.

6.) I attempted to add a weld symbol to a different drawings in a different project, success.

7.) I attempted to add a weld symbol to a different drawing file in the same project, success.

8.) I attempted the original process again, IV crashed.

9.) I attempted to open the assembly file referenced by the drawing file, success.

10.) I attempted to open a drawing file that references the same model file as well as others in a larger assembly, success.

11.) I removed parts from the assembly file that were no longer needed in the design, success.

12.) I attempted to open the original problematic drawing file, IV crashed.

13.) I attempted to open it again, IV crashed.

14.) I used pack-n-go to consolidate all of the files to upload for my support request.

15.) I attempted to open the pack-n-go drawing file on my laptop.... IT OPENED.

Now, every time I attempt to open the original drawing file on my workstation, IV immediately crashes. When I open the PNG drawing file on my laptop it works. What should my next step be?

I am afraid to go any further because this drawing file is very much needed, and so large and complicated that I do not want to just create the file again (6 sheets detailing a large tank). I also don't want to start copying and pasting the file that does work on my laptop and screw something up with the files on my workstation. And of course, this tank is scheduled to start fabrication today.
 
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)

View 1 Replies View Related

AutoCAD Inventor :: Saving A Drawing As DXF File

Jul 17, 2012

When I try to save a 2 D drawing as a DXF file, I get a box saying "problems encountered while saving the document". I am using version 2012. My older version did this operation without a problem.

View 8 Replies View Related

AutoCAD Inventor :: Align Leaders In Drawing File

Jun 14, 2013

Is there any way to align leaders in a drawing file?  I can't even seem to get a "tracking" line so I can manually align them.  

Dell Precision T3500
Intel(R) Xeon(R) CPU W3530 @2.8GHz
ATI FIrePRo V5800 (FireGL V)
12 GB Ram
64 BIt OS

View 6 Replies View Related

AutoCAD Inventor :: Changing Part File In Drawing?

Aug 8, 2012

Is it possible to update an existing drawing to reference a new part or assembly file while maintaining associated views and possibly the annotation also? 

I have tasks which require frequent subtle changes to assemblies. These assemblies will then be given a completely new file name, so it is no longer just a revision change but a new part altogether.

View 5 Replies View Related

AutoCAD Inventor :: Part Missing In Drawing Of IPN File

Nov 5, 2013

I've got a view of a presentation in a drawing and one of the parts which is in a sub assembly.

I've checked the visibility in the presentation and the drawing and the assembly but all say visible.

Restarted the computer, but still no change.

see below a pic of the drawing, I've drawn in a red rectangle where the part should roughly be.

IV 11

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved