AutoCAD Civil 3D :: Exporting Simple SHP Files Into GIS
Sep 10, 2012
I need to export a .SHP file containing some polygons to a GIS user so he can lay the shapes in a GIS map. The data he needs from me is the outlines of several wetlands I've designed in C3D 2010. There isn't any elevation data associated with the outlines. They are just traced waterlines from each pool set into a layer called "permanent pools." He wants these to show location in a GIS plan.
When I try to MAPEXPORT, and then selct each of my 10 pool outlines, it says "no object selected" in the command line.
View 9 Replies
ADVERTISEMENT
Feb 22, 2010
When I try to export a shape file (SHP) from Civil 3D, I get to the dialog box on the selection tab and the area that I'm used to seeing that says "Object Type" where you select either Point, Line, Polygon or Text is missing. I can't export the shape files without this option.
View 5 Replies
View Related
May 23, 2012
I have to convert my ACAD drawing to shape files for a GIS user. I have figured out how create a polygon, point or line and add object data with the tables. I have my ACAD drawing setup to the requested coordinate system but when I send them the shape files they are telling me that they get a error in ArchGIS stating "an extent that is not consistent with the associated spatial reference information". I am using Civil 3D 2012.
View 3 Replies
View Related
Jan 3, 2013
I'm getting these errors when exporting a simple file as an EPS.
View 5 Replies
View Related
May 17, 2012
I would like to open discussion about function that could easilly convert Civil 3D drawing with its all corridors, grading groups, feature lines etc. to regular AutoCAD 2D drawing to be able to hatch, measure, trim and so on. Is it clear, that corridor edit commands and features are not good enough to add another structures as stairs, culverts, parking lots with green islands and another civil structures...
Export to AutoCAD or AEC Explode converts drawing to some 2D/3D exploded hybrid, where it takes hours of editing, flatting and joining lines to make graphically correct and usable 2D drawing. And what worse, when the design is changed, user has to start from scratch again and again, which is not twice effective... And it is just directly against all Autodesk marketing phrases how to work smarter using BIMs.
View 9 Replies
View Related
Sep 9, 2012
When I generating contour(surface) using Civil 3D it gives very complicated contours.Some times those contours cuts each other and have very strange shape.
I used to use SURFER software to generate contours.It gives simple contours.But I like to use Civil 3D because.
I attached SURFER contours and Civil 3D contours. I also attached AutoCAD file those who using older versing of Civil 3D.
I know how to smooth contours in Civil 3D but it does not solve my problem. You may say "You should use commands like swap edge,delete line .
View 5 Replies
View Related
Apr 3, 2012
how do I use Civil 3D to do basic pipe analysis computations? For example, I give it the slope, material, etc. and it spits out the flow velocity, flow depth, slope min, etc.
All I want for now is a basic tool for sizing pipes without all the bells, loops & whistles. I can learn the fancy pipe networking stuff later.
View 5 Replies
View Related
Jan 8, 2013
what is the command in AutoCAD 2013 for exporting drawings as DWFx files so that clients who do not have AutoCAD can open or plot a DWFx file using a current version of Internet Explorer or Safari for Apple as an alternative browser.
View 2 Replies
View Related
Jul 31, 2011
I'm using ACA 2012 with Windows 7 Pro x64 in a stand-alone environment. Lately it seems that even running a very simple script file takes multiple minutes where it used to take 1 or 2 seconds. Also, the script no longer scrolls through the 4 or 5 commamd lines I show at the bottom of the monitor; it just lays there like an egg. This behavior is common to all of my scripts. Also, saves seem to be taking a lot longer than before. I've turned virus protection off to no avail.
View 5 Replies
View Related
Sep 14, 2012
I have a simple catchment area that I've routed to an inlet and then to an outfall. The 10 year storm peak flow going into the inlet is 3.91 cfs and my flow in the link to the outfall is 10.55 cfs. I do not understand why it is increasing going into the pipe. I've attached the pdf results here because for some reason it won't let me attach.spf file.
View 4 Replies
View Related
Apr 19, 2013
I've been downloading whole tiles from OSIP for lidar surfaces. I've been using the grid files, and they work great. But, I don't really need an entire tile while working in my drawing, and I'd like to clip just my area of interest out of the tile. What is the fastest way to do this? These whole tiles are data hogs, and I fear they are slowing me down.
I used to have a computer at my old job that wouldn't slow at all using this stuff, so I haven't had a reason to learn how to do this until now when i'm forced to work on a laptop.
View 9 Replies
View Related
Apr 12, 2013
I am experiencing a problem in 2013. In part builder, I am trying to add wall thicknesses to the simple cylinder. I was able to add options for inside diameter and set floor thickness to a list and add options for that, but when I try to set wall thickness to list instead of constant, I get an error in the value menu.
Everything disappears and in red at the bottom, I get a message about an error in calculations. I even tried temporarily deleting the With from any calculations, but I still got the error. I have had no problems doing this in 2011 or 2009.
View 2 Replies
View Related
Oct 5, 2012
I have a data set including .shx .shp .prj and .dbf files each named the same for landuse, rail, road, etc for a single city. How can I open these files to export a simple line drawing for use in a thesis project as a map.
View 4 Replies
View Related
Mar 24, 2013
We are making road , it has intersections with simple roads wich leads to forest or a fields or to a private territory. We have 60 of those intersections (crossroads) , if we would start making them all with intersection wizzard it would take a lot of time... , maybe there is simpler way to make such an easy crossings ? ( all of those crossroads are same type same geometry, the only difference is location)
View 4 Replies
View Related
Oct 29, 2013
Ok I am attempting to add a floating curve from the end of a simple straight alignment. No matter what I do the curve is created from the left end of the alignment. I first created an alignment from objects. I tried reversing the alignment and it still comes from the same point. I tried creating an alignment and drawing the objects using a fixed line. Still from the same point. How do you get it to create the floating curve from the opposite end?
View 1 Replies
View Related
May 31, 2013
Does the exported dwg file always have to be a zip file? I have tried save as a dwg file but it seems to be an Invnetor dwg which has the geometry as a block when opened with AutoCAD. It is a little easier to explode the block in AutoCAD rather than open and extract the zip file, save the extracted dwg then delete the zip file.
View 3 Replies
View Related
Apr 20, 2012
I want to create a simple scale bar in a paper space layout, that is dynamically linked to the scale of the viewport.
I've searched and come across a few dynamic scale bars on the web and a few forum discussions, but I just can't work out how to create my own from scratch...
Civil3D 2013 (infrastructure suite)
Self-built i7-3930K, 16Gb RAM, P9X79 m/board
SSD(system), HDD(data), GTX680, Win7Pro64
View 9 Replies
View Related
Sep 7, 2012
I have approx 20 autocad files and I would like to change one text inside these files by running a simple script or lisp.
View 4 Replies
View Related
May 25, 2013
I am modelling an object based on a drawing, so you create a plane behind the model, assign the drawing as a texture to the plane, and hey presto, you can visually align your model to the drawing. I used to do his all the time back in the day but for some reason i cannot get it to work,
View 3 Replies
View Related
Jun 25, 2012
Illustrator keeps freezing when applying an effect such as texture-grain to a simple gradient, or even rasterizing a simple black circle. My system is about a 6month old macbook pro with 16gb ram, i7 and AMD Radeon HD 6770M 1024 MB. What could be causing this? It wasn't like this when i first started using the laptop but has started to do it everytime i try and do any of those simple tasks recently.
View 5 Replies
View Related
Jun 6, 2012
When I export from Inventor professional to an STL file for 3D printing. Everything exports ok except threads. I have a model with M10 and M4 threads which never show on the STL file. Is there an option I need to tick to make sure they convert?
View 9 Replies
View Related
Jun 1, 2013
I have tried to export a DXF model to SAT via the Export option in the File menu. However, I do not see any SAT file generated and there is no message that the export attempt was unsuccessful. How to approach this problem?
View 8 Replies
View Related
Jun 9, 2011
I have tried to export shape files using the Map --> Tools --> Export function and I am setting up everything that I need to complete the import but I can't seem to get all the files I need. Our GIS expert says that he needs 7 files; the .shp .shx .cpg .dbf .idx .sbn and .sbx. The problem I have is that IM not getting the .sbn or the .sbx files when I go through the export process. Or even if those 2 files I'm not getting are necessary to be able to import the shape files into GIS.
View 3 Replies
View Related
Feb 27, 2013
I have a customer that wants the .idw file. If I do a save as and ship him the file I know all the links will be broken and won't work right. I remember in AutoCad had a command called Etransit where you can export a drawing and have everything attached to it exported with it so you didn't lose the xrefs, layers, ect.... Does inventor have something like that where I can export the .idw and it'll attach all the .ipt and .iam files to it in like a .zip file?
View 4 Replies
View Related
Dec 19, 2013
Exporting DWG. Files to Stl in 2011 Autocad
View 2 Replies
View Related
Nov 5, 2013
I can use the program and quite happily create components, sub assemblys, and master assemblys.Our company still doesn't have ANY 3D FILES. I have been tasked with eventually creating a full range of end product drawings as Step files. They are wanting BIMS. I see this a step to far atm.....
With the products that manufacture inhouse (industrial / comercial boilers) I have produced each individual component within the boiler to eventually aid to manufacture and bombs to intergrate with SAP.
With doing this every boiler I have done in inventor all the components are there and easily accessable. Am I right in thinking it needs to be exported as a step file to lock everything within the master assembly.
When I have exported it to a step file, when it comes to importing it into an assembly file the components are still accessable when expanded in the menu at the side. Is this because im opening it on my computer or have I done something wrong.....
View 9 Replies
View Related
Jul 2, 2013
Can you export files to a format for FEA software.. *.stp etc..
View 2 Replies
View Related
Oct 18, 2011
I imported an .stp file into Inventor 2011, saved it as an .ipt, and edited several features. When I export this edited file as an .stp and sent it to a client, they said that the file contained multiple errors: it showed no solid bodies (only surfaces), and the 3D thread feature I created (using a thread cutter and Inventor "Coil" command) did not read correctly (the thread I created was an edit of a previous thread, and apparently the .stp file simultaneously showed the new thread and the old, unedited threads).
Creating an assembly (.iam) and shrinkwrapping it before exporting as an .stp does not work.
(When I open the stp file I created [in Inventor] the file, of course, reads correctly. All solid bodies are visible, as well as the single thread.)
How to export an .stp so that it reads correctly in SolidWorks?
View 9 Replies
View Related
Feb 22, 2012
I had some problems with the xml's civ3d is exporting for other software. Are there option as to what goes in the xml that is exported? I need try just getting the points and breaklines in the xml from CIV3d. Am I missing something here?
View 4 Replies
View Related
Feb 28, 2012
Within our company we use Inventor 2012 (Ultimate and Premium). We are looking to use a radiation shield calculating package called Attila from a company called Transpire Inc. This Attila software expects to receive files for import as parasolid files.
I am asking because the supplier seems to prefer Solidworks to Inventor from a support perspective even though they do say they support other 3D CAD applications.
View 1 Replies
View Related
Dec 10, 2012
we have a surveyor who uses terramodel. with 2010 we used to be able to export to a 2000 dwg and he could then convert and import to a .pro file. now, with 2013, when we do the same thing, he gets errors. we need to figure out a way to get our info into his program.
View 9 Replies
View Related
