we have a surveyor who uses terramodel. with 2010 we used to be able to export to a 2000 dwg and he could then convert and import to a .pro file. now, with 2013, when we do the same thing, he gets errors. we need to figure out a way to get our info into his program.
View 9 RepliesI use Terramodel 10.43 and Autocad Lt2008. I convert files to terramodel and back to autocad, everyday. My question is any conversion files for terramodel. e.g. the ACADimport.acf file, or ACADexport.acf.
View 1 Replies View RelatedI had some problems with the xml's civ3d is exporting for other software. Are there option as to what goes in the xml that is exported? I need try just getting the points and breaklines in the xml from CIV3d. Am I missing something here?
View 4 Replies View RelatedI'm trying to export a surface as a DEM so that I can import the object into Bryce 7.1. I have a number of sample DEMs that I have downloaded from USGS site that import into Bryce quite nicely. These samples also import to another DEM reader named "3DEM Version 20.7." I'm able to import into Bryce when I set the grid at 10, but the quality of this surface/object is not very good. The DEMs from Civil 3d are referred to as "USGS DEM"s, but they do not load on common DEM readers such as Bryce or 3DEM software. Any way of converting a C3d DEM to a USGS DEM that one of these other readers can import?
View 1 Replies View RelatedWhen I try to export a shape file (SHP) from Civil 3D, I get to the dialog box on the selection tab and the area that I'm used to seeing that says "Object Type" where you select either Point, Line, Polygon or Text is missing. I can't export the shape files without this option.
View 5 Replies View RelatedI Can't think of what might be making this happen, but when I export a single layout to PDF (or to a printer) everything works out as normal. When I Export all Layouts to PDF, my text changes fonts and inserts squares for only some of the characters.
View 6 Replies View RelatedI exported my surface to xml, then imported it into a blank drawing and the two surfaces looked different. The new drawing surface appears to be ignoring the surface. So after reading a post on here, I went back to the original drawing extracted the border and attached it back to the surface and tried again. I can not seem to export a surface and have it import with the same look. To be clear I am not talking about styles, I can not achieve the same definition look.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
I have a question about exporting a 2d drawing to a Shapefile. I have checked out the Help file supplied with AutoCAD Civil #D 2013.
View 6 Replies View RelatedI'm currently using the Autocad Civil 3D 2014 on daily basis for urban infrastructure design. When using Autocad Civil 3D 2013, I always would create feature lines from corridors and then export this file to a ACAD 2007 version, which would read the feature lines as 3D polys. The company's topographer could then use this file to make his markings on the field very easily.
Now, when I do the same process using Autocad Civil 3D 2014, the ACAD 2007 file won't present the feature lines as 3D polys, but as 2D polys. This presents a major inconvenient, because I now have to export the file to ACAD 2007, open it in Autocad Civil 3D 2013, rebuild the surface from the design contours and create a feature line from the design surface; export the surface AGAIN to ACAD 2007 and FINALLY I'll get the 3D poly my topographer can read.
I have to convert my ACAD drawing to shape files for a GIS user. I have figured out how create a polygon, point or line and add object data with the tables. I have my ACAD drawing setup to the requested coordinate system but when I send them the shape files they are telling me that they get a error in ArchGIS stating "an extent that is not consistent with the associated spatial reference information". I am using Civil 3D 2012.
View 3 Replies View RelatedWe have an "original" existing surface of a ditch, a massive ditch. dredging has taken place and now we have a new existing surface of the ditch. the client wanted to see the delineation between the areas that are now 3" lower, 6" lower and 9" lower (and so on). I was able to do this easily with elevation banding. now the client would like some sort of GPS uploadable based on the color map that shows the banding. How to accomplish this without having someone set there and set points along the different colors on the surface. that is going to be incredibly time consuming. is there an automated way to export the data that I am looking for?
View 7 Replies View RelatedI need to export a .SHP file containing some polygons to a GIS user so he can lay the shapes in a GIS map. The data he needs from me is the outlines of several wetlands I've designed in C3D 2010. There isn't any elevation data associated with the outlines. They are just traced waterlines from each pool set into a layer called "permanent pools." He wants these to show location in a GIS plan.
When I try to MAPEXPORT, and then selct each of my 10 pool outlines, it says "no object selected" in the command line.
I have a drawing with a LOT of monitoring well symbols which have labels next to them. The symbols are simple drawings and the label is just text.
Is there a way to be able to export these with their coordinates and labels to a tablem (PNEZD style)? If not, and I don't think I can, how do I create a similar item that is "exportable" and would act like a point feature in ArcPad or other GIS based software.
what happens when we try to export corridor to Land XML file? Do we get design cross sections that surveyors can import in the equipment? I need to export my cl alignment with the design cross sections.
View 9 Replies View RelatedCan't seem to be able to Export to ACAD 2007 without the following appearing
Recover has found no errors, all XREFS have been bound and I've even exploded AEC objects
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I'm really struggling with exporting a surface to XML.
I made a surface in which I paste all relevant corridor surfaces for the subarea of the project.
The surface looks OK in the file, but when I export, the XML file ignores my few edits, and adds excessive triangulation between adjacent corridors.
I already tried with adding boundaries, creating snapshots, exporting to XML 1.0 1.1 1.2, and regardless of what software I use the resulting XML, it looks crap, and the drainage team is struggling to work with it.
==== i7 @3.4GHz ==== 8GB @666MHz ==== ATI/AMD @675MHz ==== win7 x64 ====
How to export a surface as a gridded XYZ file based on a user specified grid cell size.
View 3 Replies View RelatedWe're moving to Trimble Access on the survey data collectors which means that we have to export design data using Trimble Link and then use Trimble Business Center to examine the data and do any editing before sending it to the field.
So far I've found that alignments, profiles and surfaces seem to transfer OK. Corridors however have been an almost total failure.
Civil 3D 2012 & 2013 & 2014
Toshiba Qosmio X505-Q890
2 x i7 - Q740 quad core CPU's
8GB of RAM
60GB SSD + 500GB HDD
NVidia GeForce GTS 360M - driver 8.17.13.0697
Win 7 Home Premium
I have about 50 point groups that the client needs in an ENZ format, is it possible to export them all at once with the name of the point group being the name of the file?
if so, the more annoying part of this is that I actually have to make the ENZ file an ENZD file with the D being the name of the file for each point, if both of these things are possible
Using Civil 3D 2013. I've exported my Civil 3D points to an SDF and then to a shapefile. I cant get the "Z" elevation to come with it. Northing and Easting is correct, only problem is that is holds a zero elevation. how I can get the elevations to show correctl in the shapefile?
View 9 Replies View RelatedJust trying to bring in a Volumes Dashboard report from IE10 to Excel 2010 (it all worked fine until I my PC was upgraded from IE9/Excel 2007)
When the report is in IE10, I Select All and paste to Excel (as I always have done) and the numbers are not recognised as numbers (there is no convert text to numbers prompt) and seem to have a leading space which Find/Replace can't find and replace.
If I right click in IE10 and Export to Excel, most of the exported data has a weird character preceding it (but which can be found and replaced). What this character is and how to stop it appearing?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
Since 2013 is the first version to have pressure networks, do I need to explode the objects before saving to a previous version? Or is there another method? I will lose all my properties if I explode the objects I believe...
View 2 Replies View RelatedI get a multiple error message dialogue "Cannot find resource string number XXXX in AeccPublishSVC 100 when exporting a DWFX file of drainage in Civil3d R2014 (I have R2013 open as well).
View 4 Replies View RelatedI have created a complicated 3D utilities model using pipe networks. All the clashes have been ironed out, the 3D DWF looks great when rotated, the client is happy. Now It is time to hand it over to the contractor to build. He hasn't got Civil 3D and isn't going to get get it. He either want's the information as an x,y,z, text format or a 3d polyline. I cannot see anyway of doing this with the tools available.
View 9 Replies View RelatedIs it possible to export a DTM (TIN surface) to ESRI's ASCII grid format (for ArcGIS)?
I've attached an example file.
Failing that, is it possible to export to a simple XYZ point file?
I have a series of curved feature lines in Civil 3D where the elevation varies along the length of the curve. When I export the file in AutoCAD the feature line elevations are 0. In my previous version of 2010 civil 3D this did not happen but now I am running 2012 version and I can't find a way around it.
Why does 2012 Civil 3D not export feature lines the way it did in previous versions and retain the elevations?
My workflow consists of building a point cloud object from a LAS file, filtering it for ground data, and and building a surface object with it. Breaklines are inserted into a surface object, and then the surface object is exported to a DEM file to be used in a GIS application. The problem is that Civil 3D rounds the elevations to 1-foot intervals, even when the file is structurally floating point. How to override this rounding to get floating point values that reflects the original data?
View 7 Replies View RelatedWe often have to create dxf files for surveyors to use in Trimble survey controllers. Usually, the linework has to be 3D polylines so that they can stake out the lines on the ground in 3D.
When compiling our design we often have to use arcs which do not function as 3D polylines. To get around this, we convert them to feature lines. This works for creating surfaces but we are unable to export these feature lines in our dxf files.
C3D 2012
Win 7 64 i5
8GB RAM Quadro FX 1800
with the Genio Exporter. I need to export the surface triangles from my job, but the Genio export dialouge box only gives me the option to export suface boundaries.
View 4 Replies View RelatedI have a drawing set up to be Survey Feet and everytime i export it to autocad using the export tool it converts it to international feet.
Civil 3D 2012 all sp's
I'm new to using AutoCAD but learn very quickly. My boss wants me to export our cad file to pdf, but he wants it to have the black background and the colored layers. I have found how to export the color on the layers but not the black background.
View 7 Replies View Related