I have a drawing with a LOT of monitoring well symbols which have labels next to them. The symbols are simple drawings and the label is just text.
Is there a way to be able to export these with their coordinates and labels to a tablem (PNEZD style)? If not, and I don't think I can, how do I create a similar item that is "exportable" and would act like a point feature in ArcPad or other GIS based software.
This is what I'm trying to achieve, except with a Civil3D label.I want to add the circle with the typical detail callout to an alignment label. I can format the text just fine, but can't figure out any way to add a symbol to a label. For example, I was thinking I would create a "water meter" style with the correct number for water meters, so there would be a block or something attached to the label.
View 8 Replies View RelatedWhen I create a weld, the browser is populated with default weld numbering. If the welds are deleted then reinserted, the numbering does not reset and can make using the "create weld symbol" option confusing.(see attached screenshot) How to reset the browser call out without manual override?
View 4 Replies View RelatedI think we keep on without an annotation symbol to label the x,y and/or Z of a point ? Have I to develop our symbol ? I'm going to create my own symbol. Using attributes & dynamic behaviours I can do it.
how to get my arrow rotates (I move the box and I have - the arrow aligned with line1 and line 2 horizontal).I don't want to use parametrics, because I want to have a symbol compatible with versions prior to 2010.
The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies View RelatedC3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
Is there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies View RelatedI'm trying to label my Profile label stations as raw stations, 20~20 meters, and I'm not being able to adapt the format to STATION 0, STATION 2, without any plus zeros or +, or -, or commas, or anything, as following in the image.
Is there a easy way to do it?
It is possible take action label before?
example:
Stage01, label 'home'.
Symbol01, click on Retangle01 action: Play ('home') in Stage01.
A label that I've created in Illustrator isn't mapping onto a can in 3D revolve
1. Traced the side of a can using the pen tool, and turned it into a 3D object using revolve (NOTE: I haven't applied any stroke to it, just a white fill - otherwise, Map Art wouldn't even open, it would just say " Artwork produced no surfaces for artwork mapping.")
2. Dragged the label into symbols
3. Clicked on the side of the can, opened 3D revolve, and clicked preview
4. Clicked Map Art, selected the appropriate surface
5. Selected the label from the symbols, scaled it, and clicked preview
When nothing happened, I tried everything: It wouldn't show in Invisible Geometry, so it can't be on the inside of the surface. When I tried Shade Artwork (slower), the whole program just shut down right away...
Interestingly, when I selected a vector symbol, it appeared on the surface perfectly...any thoughts on what that could be?
I'm working on a project in Edge Animate, however I have about zero experience with JavaScript and I can't seem to get this working without it.
Below you see the code. It's part of a Symbol situated on the Stage. What I need it to do is to play from a Label ('subFontsTitels') situated on the Stage-level. I've tried a lot of posibilities but with no (satisfying) results.
Part of the code:
Symbol.bindElementAction(compId, symbolName, "${_Button}", "click", function(sym, e) {
// play the timeline from the given position (ms or label)
sym.getComposition().getStage().sym.play('subFontsTitels');
// insert code for mouse click here
});
//Edge binding end
Is it possible to pin a label to another label ? Or pin a label to an object so that when the first label (or object) is moved, the other moves with it ?
View 2 Replies View RelatedI have two buttons
btnA on the main stage
btnB is nested inside btnA
How do I access a frame lable on the main stage from btnB
I'm having trouble plotting a symbol over a line. For example, I'm doing a corner record and need to put our symbol for a set pipe on the corner of the property line. Our symbol for a pipe is just an open circle. I want to put the circle on the corner and do not want the the property line to be shown inside that circle. Essentially I want to make it look like I trimmed the line inside the circle but I want to leave the line intact so there is no gap in the boundary. What is the way to do something like this?
View 9 Replies View RelatedEach time an @ is entered at the command line, C3D is freezing for up to 15 seconds before allowing the comand to continue. It wasn't happening last week and no changes have been made to the instalation. What could be causing this glitch?
View 1 Replies View RelatedI'm using Civil 3D 2013, and this morning, I have this symbol that appeared under my Viewport Control. What is it and can it be removed?
View 2 Replies View RelatedI am in C3D 2012 and using Romans.shx for my text. When labeling an Arc, the degree symbol comes out too close to the following text/number. Is there any way to adjust the spacing on curved text. On a straight line it looks fine.
View 4 Replies View RelatedWe've had a little nagging problem that we've just been living with, but getting a little tired of it: when building a pipe network the plotted line will stop plotting at the outter wall of the structure, thus leaviung a gap between the pipe and the structure. On a 48" manhole it's hardly noticable, but when the manhole gets larger, so does the problem. Check out the attached pdf and you'll see what I'm talking about.
I've been through all the style setting I can think of, but I thought there might be a variable to take care of it...like the FACETDEV variable for crossing pipe.
I am using C3D 2012. When I draw a fence line (barbwire) it works fine until it is a short section, then the "x" symbol does not show.
You can change the scale but that also changes the symbol size. You used to be able to change this in the command line. Is there a way to do that without creating another style?
C3D 2013
Win 7 Intel(R) Core (TM) i7-2600 CPU @3.40GHz
8.0 GB 64-bit
I have been searching around all morning for a way to create a symbol legend in C3D 2012. Is there a way to create a legend of point sysmbols being used with in a dwg? I could do this manually but that could take a while if I have lots of sysmbols.
View 1 Replies View RelatedI created a new title block drawing and for some reason a symbol popped up in the middle of it. I can't click on it or figure out why it's there. How to get rid of it?
View 7 Replies View RelatedI need to scale the trunk and canopy on importing of a points file. I can scale one parameter through the description keys (So i have been doing the canopy) but would like to do both. My code is Tree 0.5 10. Parameter one being the trunk diameter and parameter two being the canopy size.
View 4 Replies View RelatedThe attached picture is me trying to balloon a part. I would like to just add some notes to the balloon so that I can update them manually but all I can find is to have a symbol. So I created a symbol, the insertion point for the symbol is shown. For some reason I get an extra number and the symbol offcenter. Why is this happening? What I'm really looking for is a balloon that is fully customizable so that I can just add text to the top and bottom and fill out the details.
View 5 Replies View RelatedI have a survey symbol for a tree that is created using two polyline arcs with width to make a solid circle. It is scalable in the desc key by tree size.
Sometimes when I plot a drawing the tree symbols plot (both paper and pdf) as "spokes on a tire", like a line with a polar array. (Even though the style is created with 2 polyline arcs with width)
If I explode the point object (not anywhere near ideal) then it plots as a solid circle as it should.
I don't maintain the template, I just use it, so modifying the point style isn't really an option.
I have not been able to nail down when it occurs and when it doesn't.
I have C3D 2012. I want to label a part of an arc. The arc has 3 lines that intersect it. I want to label the overall arc and the pieces of the arc. The overall arc is not a problem. How can I label the parts of the arc without breaking it up?
View 5 Replies View RelatedI keep getting the words "Label Text" being placed at 0,0 every time I insert a profile view into my drawing. Is there a simple way to change something in the settings to either not display this at all or sontrol how/where it is displayed? It is annoying when you do a zoom extents being you now get 2 small dots on screen, 1 being the actualy drawing at the correct utm cooridnates and the other being this piece of text down at 0,0.
View 9 Replies View RelatedI have applied a client's style to the alignment to show PI's. In this case we have 2 alignments close to each other (NB & SB of road). PI's close to each other will then overlap. What I would like to do is apply a style that will have the line and text go exactly in the opposite direction. I am trying to avoid dragging the text as that seems to bring up several more issues. I am looking for whatwhere to change within the style editor to make this happen.
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000
I need to add a ONE label to an alignment. I would like to do it via Vlisp or C#.
View 4 Replies View RelatedNeed writing an expressions in a label style. I have part of it working, it is {Rim to Sump Height}-6 now I would like it to put 0 if it is 0 or less but I don't know how to do it. It works great on positive number but I want it to put 0 if it is a negative number.
View 8 Replies View RelatedIs there a way to label the low point of a profile or alignment that doesn't have any vertical curves? We have an existing alignment and profile which is relatively flat, and we'd like to establish and label the low points for drainage improvements.
View 9 Replies View Relatedhow to change the style of the tick symbol for the cut/fill labels? In the attached you can see its a good size circle and I want to change it to just a small cross. I dont see that setting in the label style anywhere.
View 2 Replies View Related
