I Can't think of what might be making this happen, but when I export a single layout to PDF (or to a printer) everything works out as normal. When I Export all Layouts to PDF, my text changes fonts and inserts squares for only some of the characters.
View 6 Replies
Is there a way to export ALL layouts at once or are you limited to one at a time?
View 1 Replies View RelatedI'm about ready to put together a large job that is going to have a lot of sheets. Since most of my jobs are one sheet plans, this is out of my comfort zone. I usually just have a scaled cover sheet/border that I drop into model space and put whatever I need into it there and then print it. This job has several mini jobs in one huge model space. I think It's going to be better for me to actually use paper space as its intended this time. I'm using 2010. Just a skeleton of an order of operations, so at least I have something to search for detailed instructions.
View 9 Replies View RelatedOn a road project I have an acquisition parcel that is matched across 2 viewports on one layout. I would usually slide the parcel label so it's only visible on one layout. Then I'd add a second label that would be visible on the second layout.
This line happens to cross the viewport near the end. If I add a label in the lower viewport that looks reasonable. It will overlap in to the upper viewport. I can drag the label to very near the end of the line but it doesn't look right there. I don't think it's good procedure to try and force one parcel label on to it's own layer so it can be frozen in that one viewport.
Any technique for handling this situation?
Civil 3D 2012 SP 2.1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
We replaced a plotter that is used as the default plotter by 90% of our CAD files. When we go to plot it obviously can't find the plotter anymore and defaults to no printer. We then need to select the new plotter and reselect the paper size.
Not a huge issue by itself, but when you have a drawing with say 25 layout tabs it gets cumbersome.
assign this new plotter and correct page size to all layout tabs in a drawing? If not is there a way to at least have it maintain the paper size when selecting the new plotter and not have it auto select a different page size?
I typically import layouts into my sheet set. Looking for some information on setting up a better sheet set template with layout created that just need to be populated with my views on how others use sheet set manager.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
We replaced a plotter that is used as the default plotter by 90% of our CAD files. When we go to plot it obviously can't find the plotter anymore and defaults to no printer. We then need to select the new plotter and reselect the paper size.
Not a huge issue by itself, but when you have a drawing with say 25 layout tabs it gets cumbersome.
Know A way around this to assign this new plotter and correct page size to all layout tabs in a drawing? If not is there a way to at least have it maintain the paper size when selecting the new plotter and not have it auto select a different page size?
I have made a model with 40 viewframes. I have used the option to export 4 layouts to one drawing. My question is can I revise the original model and get the revisions automatically updated in the 10 drawings or do I have to redo the export option?
View 2 Replies View RelatedI have for a while been wanting some code that would run through all the layouts in a drawing and place a box in model space of where the viewports are looking and save a view and layerstate at the same time. I looked into doing it with .net and posted a query here but it all started to get a bit hard in .net.
So I did a bit more googling and found a lsp solution that get most of the way over on the swap here
It cycles thru the viewports and placed the box in model space to save the view and layer state I have to inject some more code into the rountine along the lines of
;; While we are here lets save a view with a layersnapshot
;;(command "_.View" "Save" "Nameoflayout" "_.View" "E" "l" "Nameoflayout" "s" "" "")
;; and as we can not access a view layersnapshot from layerstate manager lets save just a plain layerstate
;;(command " Layerstate" "????" "Nameoflayout" ?????)
to save the views and layerstates.
Some code / lsp that will cycle thru layouts and insert a rectangle into model space of where the viewports are actually looking.
I am trying to separate out a number of layouts to different drawings and want to speed up the process.
in order to avoid opening each layout and update the fields or the same text written in Title Block
- is there a way to update automatically the fields (date for example) in all the layouts with a single command.
- is there a way to update the same text in all the layouts (for example changing the adress or the name of the project written in the title block - like in word with search and replace function)
Is there a way to turn off all section tags for drawings refering to all Sketch Layouts in all the Construction Document Layouts?
View 4 Replies View RelatedHow come when I publish to plotter the layouts in a dwg in 2014 they stay in perpetual publish status and don't plot, but open same dwg in 2013, publish and almost by the time I get to the printer, all 7 layouts have printed.
View 7 Replies View RelatedHow to calculate Hydraflow Storm Sewers Extension by way of Importing DXF Plan Layouts?
View 5 Replies View RelatedI want to know if you can link AutoCad tables to other Autocad tables on different layouts. Say I have ten sheets, each with a table for quantities of pipe length, and one sheet with a total of all quantities. Can I link cells from each separate layout sheet to the main table sheet, so that I can add them all for project totals?
View 3 Replies View RelatedI had some problems with the xml's civ3d is exporting for other software. Are there option as to what goes in the xml that is exported? I need try just getting the points and breaklines in the xml from CIV3d. Am I missing something here?
View 4 Replies View Relatedwe have a surveyor who uses terramodel. with 2010 we used to be able to export to a 2000 dwg and he could then convert and import to a .pro file. now, with 2013, when we do the same thing, he gets errors. we need to figure out a way to get our info into his program.
View 9 Replies View RelatedI'm trying to export a surface as a DEM so that I can import the object into Bryce 7.1. I have a number of sample DEMs that I have downloaded from USGS site that import into Bryce quite nicely. These samples also import to another DEM reader named "3DEM Version 20.7." I'm able to import into Bryce when I set the grid at 10, but the quality of this surface/object is not very good. The DEMs from Civil 3d are referred to as "USGS DEM"s, but they do not load on common DEM readers such as Bryce or 3DEM software. Any way of converting a C3d DEM to a USGS DEM that one of these other readers can import?
View 1 Replies View RelatedWhen I try to export a shape file (SHP) from Civil 3D, I get to the dialog box on the selection tab and the area that I'm used to seeing that says "Object Type" where you select either Point, Line, Polygon or Text is missing. I can't export the shape files without this option.
View 5 Replies View RelatedI exported my surface to xml, then imported it into a blank drawing and the two surfaces looked different. The new drawing surface appears to be ignoring the surface. So after reading a post on here, I went back to the original drawing extracted the border and attached it back to the surface and tried again. I can not seem to export a surface and have it import with the same look. To be clear I am not talking about styles, I can not achieve the same definition look.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
I have a question about exporting a 2d drawing to a Shapefile. I have checked out the Help file supplied with AutoCAD Civil #D 2013.
View 6 Replies View RelatedI'm currently using the Autocad Civil 3D 2014 on daily basis for urban infrastructure design. When using Autocad Civil 3D 2013, I always would create feature lines from corridors and then export this file to a ACAD 2007 version, which would read the feature lines as 3D polys. The company's topographer could then use this file to make his markings on the field very easily.
Now, when I do the same process using Autocad Civil 3D 2014, the ACAD 2007 file won't present the feature lines as 3D polys, but as 2D polys. This presents a major inconvenient, because I now have to export the file to ACAD 2007, open it in Autocad Civil 3D 2013, rebuild the surface from the design contours and create a feature line from the design surface; export the surface AGAIN to ACAD 2007 and FINALLY I'll get the 3D poly my topographer can read.
I have to convert my ACAD drawing to shape files for a GIS user. I have figured out how create a polygon, point or line and add object data with the tables. I have my ACAD drawing setup to the requested coordinate system but when I send them the shape files they are telling me that they get a error in ArchGIS stating "an extent that is not consistent with the associated spatial reference information". I am using Civil 3D 2012.
View 3 Replies View RelatedWe have an "original" existing surface of a ditch, a massive ditch. dredging has taken place and now we have a new existing surface of the ditch. the client wanted to see the delineation between the areas that are now 3" lower, 6" lower and 9" lower (and so on). I was able to do this easily with elevation banding. now the client would like some sort of GPS uploadable based on the color map that shows the banding. How to accomplish this without having someone set there and set points along the different colors on the surface. that is going to be incredibly time consuming. is there an automated way to export the data that I am looking for?
View 7 Replies View RelatedI need to export a .SHP file containing some polygons to a GIS user so he can lay the shapes in a GIS map. The data he needs from me is the outlines of several wetlands I've designed in C3D 2010. There isn't any elevation data associated with the outlines. They are just traced waterlines from each pool set into a layer called "permanent pools." He wants these to show location in a GIS plan.
When I try to MAPEXPORT, and then selct each of my 10 pool outlines, it says "no object selected" in the command line.
I have a drawing with a LOT of monitoring well symbols which have labels next to them. The symbols are simple drawings and the label is just text.
Is there a way to be able to export these with their coordinates and labels to a tablem (PNEZD style)? If not, and I don't think I can, how do I create a similar item that is "exportable" and would act like a point feature in ArcPad or other GIS based software.
what happens when we try to export corridor to Land XML file? Do we get design cross sections that surveyors can import in the equipment? I need to export my cl alignment with the design cross sections.
View 9 Replies View RelatedCan't seem to be able to Export to ACAD 2007 without the following appearing
Recover has found no errors, all XREFS have been bound and I've even exploded AEC objects
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I'm really struggling with exporting a surface to XML.
I made a surface in which I paste all relevant corridor surfaces for the subarea of the project.
The surface looks OK in the file, but when I export, the XML file ignores my few edits, and adds excessive triangulation between adjacent corridors.
I already tried with adding boundaries, creating snapshots, exporting to XML 1.0 1.1 1.2, and regardless of what software I use the resulting XML, it looks crap, and the drainage team is struggling to work with it.
==== i7 @3.4GHz ==== 8GB @666MHz ==== ATI/AMD @675MHz ==== win7 x64 ====
How to export a surface as a gridded XYZ file based on a user specified grid cell size.
View 3 Replies View RelatedWe're moving to Trimble Access on the survey data collectors which means that we have to export design data using Trimble Link and then use Trimble Business Center to examine the data and do any editing before sending it to the field.
So far I've found that alignments, profiles and surfaces seem to transfer OK. Corridors however have been an almost total failure.
Civil 3D 2012 & 2013 & 2014
Toshiba Qosmio X505-Q890
2 x i7 - Q740 quad core CPU's
8GB of RAM
60GB SSD + 500GB HDD
NVidia GeForce GTS 360M - driver 8.17.13.0697
Win 7 Home Premium
