AutoCAD LT :: Exporting All Layouts
Feb 22, 2012Is there a way to export ALL layouts at once or are you limited to one at a time?
View 1 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Exporting All Layouts To PDF?
Jun 24, 2013I Can't think of what might be making this happen, but when I export a single layout to PDF (or to a printer) everything works out as normal. When I Export all Layouts to PDF, my text changes fonts and inserts squares for only some of the characters.
View 6 Replies View RelatedRevit :: Turn Off All Section Tags For Drawings Referring To All Sketch Layouts In Construction Document Layouts?
Feb 23, 2012Is there a way to turn off all section tags for drawings refering to all Sketch Layouts in all the Construction Document Layouts?
View 4 Replies View RelatedAutoCAD Civil 3D :: How To Use Layouts
Aug 13, 2012I'm about ready to put together a large job that is going to have a lot of sheets. Since most of my jobs are one sheet plans, this is out of my comfort zone. I usually just have a scaled cover sheet/border that I drop into model space and put whatever I need into it there and then print it. This job has several mini jobs in one huge model space. I think It's going to be better for me to actually use paper space as its intended this time. I'm using 2010. Just a skeleton of an order of operations, so at least I have something to search for detailed instructions.
View 9 Replies View RelatedAutoCad :: Can't Paste In Few Layouts
Jan 15, 2013I had created 14 layouts, in 9 of them i can copy my stamp, in others 3 - I cant ( I am doing copybase and simple copy/paste - isn't working)... what could be wrong with those few layouts. ?
View 9 Replies View RelatedAutoCad 2D :: ANNOAUTOSCALE - How To Use In Layouts
Feb 10, 2012i cannot understand the ANNOAUTOSCALE..When to on / off the button and how to use in layouts
View 1 Replies View RelatedAutoCAD LT :: Copying Viewports Between Layouts?
Sep 18, 2003When I cut and paste a viewport from one layout to the other the layers that were frozen in that viewport become thawed. Is there any way of copying the viewport over so that those layers that are frozen in that viewport only remain that way ?
View 8 Replies View RelatedAutoCAD LT :: Selecting Xref Throughout Layouts
Feb 7, 2013Any way to select an Invalid Xref that is attached on multiple layouts and delete them at once instead of going through every single layout and deleting it manually.
AutoCad LT 2014
AutoCAD VB :: Zoom Extents All Layouts With Vba
Oct 26, 2011I want to make a code to zoom extents all layouts in a open drawing.I wrote this but it doesn't work at all:
Sub zoomextentslayouts()
Dim Laytab As AcadLayout
For Each Laytab In ThisDrawing.Layouts
ZoomExtents
Next Laytab
End Sub
AutoCAD 2010 :: Using Fields In Layouts?
Jul 16, 2012When I add an object field in paperspace to report on the scale of a viewport in the layout, as I return to that layout and zoom in or out the viewport displays as hot in MS (tab reports as PS) and leaves the MS information of my previous visit embeded on the layouts neutral background and the "new" zoomed MS information is added to modelspace. The background objects cannot be selected or deleted but if I go to the block editor screen -choosing any block for my selection, when I close the block edit and return to the layout, the objects are cleared. I have installed service pack #1 for v12 and I lso have installed V13. I didn't notice this problem prior to the service pack or usin v13. I have an Intel i7 processor, 64 bit.
View 4 Replies View RelatedAutoCad :: Converting DWG To PDF - Layouts And Plotting
Mar 24, 2011I was asked to convert a .DWG to a .PDF.
The .DWG came from a manufacturer and displayed 3 pages worth of content that was seperated into 3 Engineering Drawings.
The layout included all 3 pages. I want to Plot this document to a 3 Page PDF.
Do I need to create 3 seperate layouts? How do I specify what part of the model goes into a particular layout?
AutoCad :: How To Turn Off / On Some Layers In Different Layouts
Nov 10, 2011I have found this point today!
If I want to trunoff/on some layers in different layouts, the best way is to use "vp freeze" column in layers properties manager. This way I can manipulate layers' visibility without altering them in MS or other layouts.
Left to "vp freeze" column there is "new vp freeze". I don't know what is this one?
AutoCAD Map 3D :: Setting Up Layouts And Viewports?
Mar 2, 2011how to set up a layout to show a t-block for plotting purposes, as well as setting up your view ports on a drawing? I have used the layout wizard before, but when it comes to selecting a tblock with the wizard, nothing shows up.
View 8 Replies View RelatedAutoCAD LT :: How To Print Multiple Layouts
Aug 20, 2010How do I print multiple layouts at once in the same file, like a batch print so i don't have to individually print each layout?
View 6 Replies View RelatedAutoCAD 2013 :: Why Layouts Are Not Exported
Jun 21, 2012Why the layouts are not exported?why the layout are not exported when applying the command “Export”? why only one layout is exported?
Is there a way to export all the layouts as any part of the dwg file is exported?
AutoCad :: Layouts To Individual Drawings?
Jan 31, 2012I have 95 layouts in one drawing and need to export / write out each layout to become individual drawings? Is there a command for this or perhaps a lisp or script.
View 8 Replies View RelatedAutoCad :: Copy Layouts From Command Bar
Sep 17, 2013I'm doing a work where i need to copy many layouts. I can set a few at a time, but doing one at a time is faster (in the end). However, rightclicking the mousebutton on the layout, copy it and scroll to the bottom to 'place at end' it time consuming.
I rather have a lisp of some kind that can copy the current layout and place it at the end (most right) of the layout tabs.
if it is possible with some -command (commandbar) i can do it myself, but i can't find any command to do so...
AutoCad :: Unable To Add Layouts To Sheet Set?
May 10, 2012I've encountered a pretty nasty problem over the past week. I can no longer add specific layouts to existing sheet sets. I can make a new sheet set, but I cannot see the drawings that I would like to add to the sheet set.
The only "solution" I've found is to make a new sheet set, save each of the desired dwgs as newly renamed dwgs, and then, f if I pat myself on the head and spin around in 3 complete circles, I have a 78% chance of being able to add them to the new sheet set.
Obviously, this is like cutting off your hand and holding it, while your friend shakes your deadhand, instead of just shaking his hand.
I've read about this so-called dbl file, but much like Bigfoot, I have not seen one with my own eyes. We have never had this problem in our office- got a new server- had this problem (isolated to the new drive) - got it "fixed" - problem has spread to older drives.
Civil 3D 2010, Windows 7
AutoCad :: Selection Window In Layouts?
Mar 14, 2012when I use the selection with the mouse, I can clearly see in model space the borders of the window I create. But when I switch to Layouts, it's invisible. I can still use it, but it's annoying not seeing the window selection. I've tried with OPTIONS-SELECTION and DISPLAY tabs to adjust it and it didn't work.
View 2 Replies View RelatedAutoCad :: Move Multiple Layouts DWG To DWG?
Feb 7, 2012I have the drawings, which has 64 layouts each. I want to move the multiple layouts to one dwg (means one drawing should have 128 multiple layouts with in) At this that two drawings having layout only, i deleted all object in model space, model space would be the same for that two drawings, after i made the combined dwg. I tired to move the layout by using drag and drop on design center, It was not done. the autocad shows the message was fatal error: out of memory.
View 6 Replies View RelatedAutoCad 3D :: Hidden Lines In Layouts?
Oct 5, 2011maybe I was dreaming. Maybe I've gone round the bend. I seem to remember somewhere a check box that would show hidden lines in paperspace viewports. For instance, a through hole, or a cavity in something.
Been a while since I've done much besides architectural drawing, so maybe I'm hallucinating.
I also distinctly remember the monochrome plot style always printing in black and white, even in a PDF. Today, the objects in modelspace are in color, and anything in paper space is black and white.
What is up with that? I must be missing something obvious, because I've screwed around with this for an hour and can't figure out what I've done to cause this.
AutoCad 2D :: Non Selectable Objects On Layouts
Dec 11, 2012I have an object in model space. but in layout i can see a portion of the object profile as duplicate away from actual object. As i close and reopen the file it disappears. What could be the cause?
View 2 Replies View RelatedAutoCAD LT :: Fast Way Of Creating Layouts
Oct 21, 2011Our company has lots of drawings/part-numbers that have anywhere from 2-9 sheets. These are all saved as individual .dwg files. I am looking to Xref the "extra" files in one main file and make layouts of those Xrefs for ease of plotting.
As we only have LT, we obviosly can't use the "Sheet Set Manager", and this is the best way I know how to do this. Is there a fast way of creating layouts (other than right clicking and selecting "Page Setup Manager"?
Or maybe I should say it this way: What do you thing is the best way of going about this venture.
AutoCAD 2010 :: Copying Layouts Between Drawings?
Jun 7, 2012I have been trying to figure out how to copy a Layout from one DWG to another. I know there are several threads about this, and I have tried the methods they reccomend, but I am having an unusual problem.
I have been trying to open a Layout by using the "from Template" option for creating a new Layout, then opening the DWG containing the desired Layout. It works, but everything drawn in model space ends up compressed into the lower left corner and there is nothing in model space. So, the paper space information from the Layout is being imported, but the drawing info is getting mixed up somehow.
I have tried using the Design Center with identical results.
AutoCAD Civil 3D :: Parcel Labels In Layouts
Apr 4, 2013On a road project I have an acquisition parcel that is matched across 2 viewports on one layout. I would usually slide the parcel label so it's only visible on one layout. Then I'd add a second label that would be visible on the second layout.
This line happens to cross the viewport near the end. If I add a label in the lower viewport that looks reasonable. It will overlap in to the upper viewport. I can drag the label to very near the end of the line but it doesn't look right there. I don't think it's good procedure to try and force one parcel label on to it's own layer so it can be frozen in that one viewport.
Any technique for handling this situation?
Civil 3D 2012 SP 2.1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
AutoCAD LT :: Export Layouts To Model Space?
Jan 23, 2012I'm trying to export layouts to model space. Everything is fine except that I have items grouped in in the original drawing that are not in the new drawing. I don't want to change all the groups to blocks.
I,m using LT 2012
AutoCAD 2010 :: Import Layouts As Sheets
Jun 10, 2011When I try and import layouts as sheets, the "Prefix sheet titles with file name" is subdued. (AutoCAD MEP 2012)
View 3 Replies View RelatedAutoCAD 2013 :: Plotting Layouts To Scale?
Sep 25, 2012when i go to preview plot after selecting D size, scale isn't correct. how do i change to correct scale for plotting after i've scaled each view in paper space. please see attached drawing.
Any good free tutorial online about viewports and plotting from them and to get correct scale?
AutoCAD 2010 :: Rotating Views / Layouts
Sep 14, 2012DView commands. We're using layout drawings of sites that are aligned with True North.
We've been using DView to rotate site layouts within model space in order to to align the layout better within the window and set up icons as such. And we have multiple Sheets set up with different information being displayed (ie different layers turned off). But when we go to the sheets, the Paper Space view still shows it's Original Orientation.
What I'd like to know is there a simple way to set the various different layouts to the same as Model Space, Without having to manually DView each Viewport as well?
AutoCAD .NET :: Propagate Block Through Multiple Layouts?
Nov 7, 2011I'm trying to import a a custom titleblock into each existing layout from a dwg. So far, i've been successful in importing this block into the first layout but can't seem to figure how to bring it into the remaining. I have a command that runs before this one that allows the user to define how many layouts should exist, so for instance, if a user opts to create 7 layouts, once they import this titleblock, i'd like it to appear in all 7 layouts. So far this is what i've got.
namespace CHTitleBlockImportMetricH
{
public class CHTBMETRICH
[Code]....
AutoCAD 2010 :: Layouts - Creating Viewports
Jan 4, 2013I am trying to organize my drawing in model into different viewports for printing purposes. However, in Layout # 1, once I delete an item it also deletes the item in model space. In Layout # 2, can't edit, select, highlight or anything ( I am in Layer 0). How can I fix that ? Basically, I want to create several layouts, each layout will contain a certain section of my drawing in model space then. I am not "layout savvy", trying to get hang of it.
View 2 Replies View Related