When I cut and paste a viewport from one layout to the other the layers that were frozen in that viewport become thawed. Is there any way of copying the viewport over so that those layers that are frozen in that viewport only remain that way ?
View 8 Replies
how to set up a layout to show a t-block for plotting purposes, as well as setting up your view ports on a drawing? I have used the layout wizard before, but when it comes to selecting a tblock with the wizard, nothing shows up.
View 8 Replies View RelatedI am trying to organize my drawing in model into different viewports for printing purposes. However, in Layout # 1, once I delete an item it also deletes the item in model space. In Layout # 2, can't edit, select, highlight or anything ( I am in Layer 0). How can I fix that ? Basically, I want to create several layouts, each layout will contain a certain section of my drawing in model space then. I am not "layout savvy", trying to get hang of it.
View 2 Replies View RelatedI have been trying to figure out how to copy a Layout from one DWG to another. I know there are several threads about this, and I have tried the methods they reccomend, but I am having an unusual problem.
I have been trying to open a Layout by using the "from Template" option for creating a new Layout, then opening the DWG containing the desired Layout. It works, but everything drawn in model space ends up compressed into the lower left corner and there is nothing in model space. So, the paper space information from the Layout is being imported, but the drawing info is getting mixed up somehow.
I have tried using the Design Center with identical results.
Problem 1 Most of the time when I am switching in between drawings that are open I have to "regen" the drawing that I switch to as nothing shows up when I switch.
Problem 2 Problem is copying layouts over. When I go to designcenter and then open drawings I try and drag a layout into a different drawing. Somtimes it works but usually I drag it onto the drawing and the new layout doesn't appear. I had this problem ever since I switched from 2010 to 2011 and now 2012.
Any routine to re-size viewports in multiple layouts? We have to re-size viewports as they were created a little too small and are now spread across almost 1000 drawings in 18 dwg.
View 6 Replies View RelatedIn some drawings the viewports automatically display viewport objects when I copy them and some they do not. There must be a systems variable and I searched through the systems variable tool in the Express tools and couldn't find it. How to get consistent results when copying viewports.
View 6 Replies View RelatedI have just installed 2012 and have drawn a 3d model. In paperspace i have a couple of viewports , all nicely set out at 1:5 scale. then i click in another viewport and bam, all the other viewports change scale (zoom out) and orientation. is there some system variable that i have overlooked?
View 9 Replies View RelatedI have a lot of sheet DWGs with a single layout in each. The layouts have several viewports into model space.
Is there a way to export out the layout tab where the viewport contents have been converted and placed into the layout space?
Ideally, I'm hoping to basically convert the viewport heavy paperspace into a dumb model space layout.
Is there a way to turn off all section tags for drawings refering to all Sketch Layouts in all the Construction Document Layouts?
View 4 Replies View RelatedThe code I'm using is supposed to go through all of the layouts and freeze the specified layer in the single viewport that is defined on that layout. It works for some viewports, but not for others. A "List" of the objects show the viewports are the same. I have a LiSP routine that gets me more info about selected objects. The first is a viewport that does not freeze the specified layer, the second does freeze the layer. Here is the code I'm using:
Public Sub FreezeNewLayerInVPs(ByVal pageNumber) Dim doc As Document = Application.DocumentManager.MdiActiveDocumentDim db As Database = doc.Database Dim layerToFreeze As String = "DETAIL_" & pageNumber Using tr As Transaction = db.TransactionManager. Start Transaction( )Dim layTable As LayerTable = DirectCast(tr.GetObject(db.LayerTableId, OpenMode.ForRead),
[code]...
Is there a way to export ALL layouts at once or are you limited to one at a time?
View 1 Replies View RelatedI'm about ready to put together a large job that is going to have a lot of sheets. Since most of my jobs are one sheet plans, this is out of my comfort zone. I usually just have a scaled cover sheet/border that I drop into model space and put whatever I need into it there and then print it. This job has several mini jobs in one huge model space. I think It's going to be better for me to actually use paper space as its intended this time. I'm using 2010. Just a skeleton of an order of operations, so at least I have something to search for detailed instructions.
View 9 Replies View RelatedI had created 14 layouts, in 9 of them i can copy my stamp, in others 3 - I cant ( I am doing copybase and simple copy/paste - isn't working)... what could be wrong with those few layouts. ?
View 9 Replies View Relatedi cannot understand the ANNOAUTOSCALE..When to on / off the button and how to use in layouts
View 1 Replies View RelatedAny way to select an Invalid Xref that is attached on multiple layouts and delete them at once instead of going through every single layout and deleting it manually.
AutoCad LT 2014
I want to make a code to zoom extents all layouts in a open drawing.I wrote this but it doesn't work at all:
Sub zoomextentslayouts()
Dim Laytab As AcadLayout
For Each Laytab In ThisDrawing.Layouts
ZoomExtents
Next Laytab
End Sub
I Can't think of what might be making this happen, but when I export a single layout to PDF (or to a printer) everything works out as normal. When I Export all Layouts to PDF, my text changes fonts and inserts squares for only some of the characters.
View 6 Replies View RelatedWhen I add an object field in paperspace to report on the scale of a viewport in the layout, as I return to that layout and zoom in or out the viewport displays as hot in MS (tab reports as PS) and leaves the MS information of my previous visit embeded on the layouts neutral background and the "new" zoomed MS information is added to modelspace. The background objects cannot be selected or deleted but if I go to the block editor screen -choosing any block for my selection, when I close the block edit and return to the layout, the objects are cleared. I have installed service pack #1 for v12 and I lso have installed V13. I didn't notice this problem prior to the service pack or usin v13. I have an Intel i7 processor, 64 bit.
View 4 Replies View RelatedI was asked to convert a .DWG to a .PDF.
The .DWG came from a manufacturer and displayed 3 pages worth of content that was seperated into 3 Engineering Drawings.
The layout included all 3 pages. I want to Plot this document to a 3 Page PDF.
Do I need to create 3 seperate layouts? How do I specify what part of the model goes into a particular layout?
I have found this point today!
If I want to trunoff/on some layers in different layouts, the best way is to use "vp freeze" column in layers properties manager. This way I can manipulate layers' visibility without altering them in MS or other layouts.
Left to "vp freeze" column there is "new vp freeze". I don't know what is this one?
How do I print multiple layouts at once in the same file, like a batch print so i don't have to individually print each layout?
View 6 Replies View RelatedWhy the layouts are not exported?why the layout are not exported when applying the command “Export”? why only one layout is exported?
Is there a way to export all the layouts as any part of the dwg file is exported?
I have 95 layouts in one drawing and need to export / write out each layout to become individual drawings? Is there a command for this or perhaps a lisp or script.
View 8 Replies View RelatedI'm doing a work where i need to copy many layouts. I can set a few at a time, but doing one at a time is faster (in the end). However, rightclicking the mousebutton on the layout, copy it and scroll to the bottom to 'place at end' it time consuming.
I rather have a lisp of some kind that can copy the current layout and place it at the end (most right) of the layout tabs.
if it is possible with some -command (commandbar) i can do it myself, but i can't find any command to do so...
I've encountered a pretty nasty problem over the past week. I can no longer add specific layouts to existing sheet sets. I can make a new sheet set, but I cannot see the drawings that I would like to add to the sheet set.
The only "solution" I've found is to make a new sheet set, save each of the desired dwgs as newly renamed dwgs, and then, f if I pat myself on the head and spin around in 3 complete circles, I have a 78% chance of being able to add them to the new sheet set.
Obviously, this is like cutting off your hand and holding it, while your friend shakes your deadhand, instead of just shaking his hand.
I've read about this so-called dbl file, but much like Bigfoot, I have not seen one with my own eyes. We have never had this problem in our office- got a new server- had this problem (isolated to the new drive) - got it "fixed" - problem has spread to older drives.
Civil 3D 2010, Windows 7
when I use the selection with the mouse, I can clearly see in model space the borders of the window I create. But when I switch to Layouts, it's invisible. I can still use it, but it's annoying not seeing the window selection. I've tried with OPTIONS-SELECTION and DISPLAY tabs to adjust it and it didn't work.
View 2 Replies View RelatedI have the drawings, which has 64 layouts each. I want to move the multiple layouts to one dwg (means one drawing should have 128 multiple layouts with in) At this that two drawings having layout only, i deleted all object in model space, model space would be the same for that two drawings, after i made the combined dwg. I tired to move the layout by using drag and drop on design center, It was not done. the autocad shows the message was fatal error: out of memory.
View 6 Replies View Relatedmaybe I was dreaming. Maybe I've gone round the bend. I seem to remember somewhere a check box that would show hidden lines in paperspace viewports. For instance, a through hole, or a cavity in something.
Been a while since I've done much besides architectural drawing, so maybe I'm hallucinating.
I also distinctly remember the monochrome plot style always printing in black and white, even in a PDF. Today, the objects in modelspace are in color, and anything in paper space is black and white.
What is up with that? I must be missing something obvious, because I've screwed around with this for an hour and can't figure out what I've done to cause this.
I have an object in model space. but in layout i can see a portion of the object profile as duplicate away from actual object. As i close and reopen the file it disappears. What could be the cause?
View 2 Replies View RelatedOur company has lots of drawings/part-numbers that have anywhere from 2-9 sheets. These are all saved as individual .dwg files. I am looking to Xref the "extra" files in one main file and make layouts of those Xrefs for ease of plotting.
As we only have LT, we obviosly can't use the "Sheet Set Manager", and this is the best way I know how to do this. Is there a fast way of creating layouts (other than right clicking and selecting "Page Setup Manager"?
Or maybe I should say it this way: What do you thing is the best way of going about this venture.
