I am running into a problem where Civil 3D is creating multiple point groups of my 4 existing groups (the original group names are Topo, Existing Ground, Hide, and All Points). The new groups seem to be copies of the originals in terms of styles but do not include the points that were designated in the originals (no points are assigned in these copies).
The groups appear some time after I create the surface.
I've also noticed that this occurs in my list of grading criteria as well.
I just discovered survey figure groups and am playing around with them. Great way to bring certain figures in & out. What seems crazy is that I have to check them on/off one at a time. Am I missing something or is this the only way to add figures to a figure group?
How to set a default point style for point groups? Whenever I import survey points, I always put them into their own point group, so I can display each day's worth of survey data differently. For some reason, the point style always defaults to a certain style (our control point symbol). I'd like it to default to Basic, so I don't have to change this every time. Is it a template drawing setting somewhere?
I have two different point groups that I am using in my drawing. One is from a survey done a few years ago and the other is from one that I did just the other day.
I don't have a problem inserting the points or whatnot, but the issue I am having is that when I click "Datum" to adjust the elevations of my new point group (to make my benchmark 100.00'), Civil 3D alters all of my points; including the ones from the older survey. Is a way to adjust elevations to only one set of points.
For some reason I have three copies of my point groups. I have not inserted any drawings into my current drawing. Just been working with pipe networks. There are three copies of every point group even though only a couple of point groups are being used in this drawing if that matters.
write out the steps involved in importing one set of points to a point group so that it is one color and on one layer and a different set of points onto a different layer with a different color? We gather survey data using different methods and want to be able to overlay the data sets for quality control purposes and them being the same color is crazy making
I have created 8 points (from 4 locations with 2 depths in each location) in _All Points/Points. These 8 points are grouped into 2 Point Groups:
Points #1, #3, #5 & #7 for Point Group - (1) Depth#1 and Points #2, #4, #6 & #8 for Point Group - (2) Depth#2.
The "Name" of Point is filled with the SampleID (like cdc-ss01-s1, cdc-ss01-s2,...) - see the attached file. From the HELP of AutoCAD C3D 2013, I have read/studies the "Point Tables" and "Point Label Styles" and I cannot figure out how to label the 8 points to show the "Point Number", "Point Elevation", and "Name" of Point (i. e. the SampleID like cdc-ss01-s1 & cdc-ss01-s2, ....).!!
C3D2012. We have a master C3D template that includes a number of point filters (let say 20 of them) and a number of layouts (again, let say 20 of them) to accommodate our two sheet sizes.
Here is the issue that I am running into, when the Plan Production tools use a layout to create plan and profile sheets from the same master template that is used to initially create the file, the whole process will duplicate each point group 150 times for every group (see attached). So, what I ended up with is 20 point groups X 150. In my example, I ended up with 3000 duplicate point groups.
The end result is a file that is somewhat unusable do to the number of point groups. The other issue is now that all of these point groups are in the file you are unable to delete them all at once without "crashing" C3D. So you are left to deleting a handful at time. It is also best if you turn UNDO off while you do it.
I have been able to duplicate this in multiple files; however, from the same master template. As a test I did create separate templates (which are pretty bare bones) for the plan production and all works well. Therefore, there is either an issue with C3D and Plan Production and point groups or it is our template.
I would really like to nail down (as best I can) what is generating the 150 duplicates/ point group name to see if there is a way "around" this.
Currently, I am unable to share the template, but it shouldn't be too difficult to re-create. Take any template, add some point groups to, add a plan and profile sheet to one of the layouts, create a new file from this template, finally create plan and profile sheets from the layout in the very same template.
In an effort to firm up my understanding of how styles, point groups, description keys and layers collide, I followed the recommendations of an article. How groups/deskeys function together for layer visibility.
This process of Layer visibility that is supposed to make the program flexible makes it almost impossibly complicated.
I have this problem when creating grading groups with more than one feature line in them. It seems really unstable when you trying get the grading to connect. I have tried to create two separate grading groups in one site or two feature lines in one grading group. And the result is the same, the grading that will be create can sometimes look oki, but suddenly they tend to disappear or look weird...
I new to using the view frame groups we do allot of double plan view 11x17 sheets using an alignment on top of MrSid aerial drawings. It is very time consuming to setup the viewports along the alignment doing the old fashion method of copying the page setup and sliding the model space along the alignment for the next sheet. I understand the plan profile and cross section methods of creating multiple sheets and how the viewframe group works for those type of sheets. I'm just not sure how to create a dwt template for one plan view on top of another plan on the same sheet with to viewports. I know I'm not the only person that creates road cl double planviews when your not concerned about a profile.
I have a handful of palettes that are divided into groups. I need to share these with other people.
At first, I exported the main palette group, with its subgroups, into an xpg file. Of course, I didn't yet know that it didn't retain the palettes at that time.
Then I exported the palettes themselves (maybe 20 in all).
My understanding is that if I import the palettes manually, then import the palette group, the palette group will be populated automatically. That isn't happening.
What is happening: The palette groups are there, and the palettes are there (in the palette list, and they automatically added themselves into the (old) current palette group. If I set the current group as the imported palette group, it adds the imported palettes to that group, but not into the sub groups.
With all of that said, is there a way to import multiple palettes at one time, via lisp or something else that I don't know about. Is there a way to have those palettes appear in their appropriate places on the palette group?
From what I've read about the problem, the palette group is stored in a customization file, and that's why it isn't transferring the palettes into the group. I'm not sure if this is true, or if I misread something, hence my questions to the group.
It is my understanding that C3D will only display the first point when there's more than 1 code for a survey point.
My first thought was to copy the line in the PENZD txt file and edit so that there's only 1 code listed. I tried appending the point number with "A" and ".1" without luck I assume I would need to use the next available point number.
An example of my txt file is:
17371,298429.877,568639.651,801.030,LPM SGN This produces only the light pole symbol and not the sign.
C3D 2012 sp1 W7Pro 64bit HP Z400 Workstation 16 GB RAM Intel Xeon CPU W3565@3.20GHz NVIDIA Quadro 4000
point# | X | Y | Desc_1 | Desc_2 | Desc_3 |....... ect
I would like to make an excel table that i can create multiple points from and make that table dynamic, ie if i edit the table the points will change.I would be labeling the points according to the different desc_# in multiple drawings
Is there any way to do this? I have messed with creating a user defined property classification and creating a new point file format, but i want that point file I imported to be dynamic, and if I change values the values will change in all my drawings.
Using LT 2014. If I select a few lines and group them, I can select that group, right click, and ungroup them. No problem.
If I group a few lines, then make another group of a few lines, then group the two groups together, then the right click menu will no longer allow me to choose ungroup. Also on the ribbon, the ungroup icon will not operate.
Before this I had LT 2011 (and before that) and I was able to group/ungroup multiple grouped objects at will. So this appears to be a glitch that was introduced since then.
author one mask that effects multiple layers without using a group mask? Unfortunately I can't throw all the layers in a group and use a group mask in this case since the layers that I want to share the mask must be in different group folders. (I am using actions to export the results of each group to the different flattened files.) So I have similar but not identical layers in separate groups that I would like to share one authored mask. I also can't use smart objects because the layers are not identical.
I have created several pond embankments using the grading tools and have created surfaces using the grading groups. The problem I am having is when I turn on the triangles for one surface, I get the triangles for all the embankments and EG. The software keeps adding to the EG and doesn't cut out each embankment. I know I'm missing a step but I'm unable to find it.
I'm currently trying to model all siteworks for a project using Civil 3D 2014. I created several grading groups that represent the various pads I need for the general project layout. Since this was the way I knew how to model the pads, now I have some intersections on the slopes between one grading group and the other. I was wondering if I could "merge" the grading groups in order for them to be just one big pad, that maintains all the levels from the other pads. Here is an image of what I am trying to explain:
What I want to do is to merge the regions circled in red, so that I have only one building pad on my terrain.