We want to convert ACIS(.sat) 3D Model to the STEP(.stp,.step) Model.
If yes, what is the Procedure for converting ACIS 3D Model to the STEP Model?
Note - We are using:
Software : Autocad 2012-64Bit , Naviswork 2013 , Inventor Ultimate 2014-64 Bit ,Autoplant V8i - SS4 version : 8.11.9.140 , MS-Office 2010 - 64 Bit.
Hardware : Workstation Dell Precision T3600
I followed up their way as URL....but still I cannot get correct solid model when I try to convert attached STEP model to IPT. I just can get surface model, but I do not solid one.
View 3 Replies View RelatedWhat level of the ACIS file is acceptable to 2013?
Any converter to change the ACIS level of a file so the wonderuos, up to the minute, top of the line, supercalifragilistic 2013, can import an ACIS file without being a pain in the butt?
I need information on how to create a 3D Solid Model from wireframe and surfaces using AutoCAD 2013.
View 7 Replies View RelatedI have recently started using AutoCAD 3D Plant 2011.
I am trying to create a catalog of Valves that we use on site by getting all the 3D blocks from suppliers. A few of our suppliers are sending me STEP files.
What program these are from and if they can be converted to a format that can be used by AutoCAD?
We had a CAD designer create a 3D drawing for us. I am pretty sure he did it in Inventor. We only have Inventor LT here. I am so lost its not even funny and my boss is breathing down my back to get this done. How in the heck do I convert the .dw file to a .step or .iges file!?
View 1 Replies View RelatedCan we convert the Inventor files IPT IAM in STEP or SAT in Batch mode
View 2 Replies View RelatedAm trying to convert this pump into solid ?
View 6 Replies View RelatedMy problem today is that I made a Model of a Part of a ship using surfaces rather than solids because the engineer thought it would be easier to bring into ANSYS program for analysis but he is now having a problem with it and I am looking into converting my current model to solid. I can do it but the method I thought of using is quite long winded and we are working to a tight deadline.
1.open up the surface part
2.use "Offset/Thicken"
3.any clashes between parts make a sketch and cut away.
the problem is the amount of plates I have and the time it takes to sort them out.
I would convert my files .max to a standard CAD format .step or .model
View 1 Replies View RelatedHow can I import CR2 files and convert to JPGs in one step?
View 4 Replies View RelatedIs there a way to create a walk cycle for your model and have it follow a path instead of animating each step? It seems like an incredible waste of time to sit and try to animate every single step the model takes. Also, I want the steps to be persistent. I don't want some to be larger and some to be smaller. I feel like there should be a better way of getting my character across the screen, I just don't know how to do it.
View 4 Replies View RelatedHow do I import step-files from Inventor to Autocad 2013 MEP ? The import function under Insert tab is not available.
View 7 Replies View RelatedI am trying to export a dwg to STEP in inventor 2013.
The exprort to STEP tab is greyed out and can't be clicked on.
I have a Command Method which has a loop that opens and commits transactions until the user is finished with it and exits.
I would like each transaction to be undone separately but the undo command undoes the CommandMethod (along with all the transactions that occurred while in the loop)
Do I need to use the COM StartUndoMark and EndUndoMark to get this working?
We received a surface model from a vendor that I have patched up as best I can, it still has one hole that I can find that I haven't been able to fill. Ideally we would like to have a solid model, but I'm running out of time to get this done and the surface model we have would be good enough for our purposes IF I can get the yellow surface tangent lines to turn off or change their color to black.
I've attached a jpg of the surface model with the yellow lines and uploaded the model here: [URL].....
I have a mac with autodesk 2014 on it. I am trying to import a step file but after I select what to import nothing happens.
View 4 Replies View Relatedhow to achieve Isolating a single element and Export the element alone as SAT File?
View 1 Replies View RelatedI have always used step files to save back to previous releases but i cant seem to get them to open in 2012, I get the attached message
I cant see any version options when saving the sat or stp file, also dwg export, import doesnt work either
I can see other people are still able to do this, is there a setting somewhere?
I am doing a placement at company and they asked me to edit a drawing but i don't know how to convert or import the file.
View 2 Replies View RelatedWhen I zoom in or zoom out the model, normally the dimension will follow the model too.But now in Autocad 2013, even the model size change, the dimension still remain unchange. why? Is there any setting I miss out? URL....
View 2 Replies View RelatedI have recently upgraded to 2013 FDS and now when I try to import Acad files (sometimes up to 2000 solids) it takes virtually a full day to import one file. When I had 2011 I could import these files much faster.
View 1 Replies View Relatedcan we Import .Step format file directly into 3ds max 2013 without using any other software?
View 1 Replies View RelatedI have somehow reversed the process of changing a sky in my photo so that when I get to the point of painting in the sky from the 2nd photo, it is painting with white (not black) that brings out the background I want on the original photo. Where have I gone wrong? Is there anywhere I can go to find a detailed step-by-step process for doing Layer Masks?
View 1 Replies View RelatedI downloaded a 3D model of a screw, the filetype is SAT, i imported to autocad but I cannot use the solprof command on the model, is there any way that i can use that command
User Library-Type SS4_2x40.zip
I want to use some free CAM software to generate G-code for my 3D model (*.sat).
View 1 Replies View RelatedI have CTR-Z mapped to step backward.
Using two different shortcuts for "undo" (one step back) and "Step Backward" (Multiple steps back) makes no sense to me. As such, I rarely use the regular undo, and do not have it mapped.
The case:
When I switch to a new layer, do a brush stroke and undo it, photoshop treats my undo as a switch back to the layer I came from. This happens a LOT, and not just to me, but to a lot of designers I know (I'm a GUI designer at a game company). Some of them have even formed a habit of "erasing" a bit in an empty part of the layer, just in case the'd later want to undo. That's bad.
My proposed solution:
-First undo my stroke, Leave my selected layer alone.
-On a NEXT press of "Step backward" change my current layer to the one I came from.
On some of our systems (most) when exporting a 3D view to DWG with ACIS Solids makes Revit 2014 terminate whitout any dialogue or information en event log what so ever. When changing solid type to polymesh the export works fine. The file is created in the crashing scenario but is only a few kilobytes in size, as opposed to to above 33 MB file another workstation creates.
All systems use windows 8.1 64-bit, have 32GB RAM (actually the one were the export works only has 24GB). Revit 2014 Build 20131024_2115(x64).
I have uninstalled Revit 2014 and reinstalled whitout success on one of the stations where the bug occurs.
I am looking for furniture content for renderings. I find some in Autodesk Seek. Most of the items are autocad 3d . It looks like they are built with surfaces. I want to make them usuable in 3d models in Autocad for architecture. I would like them to be easily accessible from the tool palletes. They seem similar to the ones that come from Archidigm. How do I drag and drop these 3d models into the tool pallette - I tried to first convert them into a blcok , but that did not work. Where can I find good furniture content, ready to drop into tool palllettes for ACA?
View 1 Replies View Relatedconver a 2D picture into a 3D model in .CAD format? This model is used for lasering.
View 1 Replies View RelatedI need to put my 3d model on a piece of paper, so I need to have annotate and different views (FRONT and/or TOP and/or Right) of the model.
I tried to use FLATSPOT command, but all annotations (dimensions) are gone. Also, is there any easy way to do annotations?