AutoCad :: How To Convert 3D Model To CNC G-code (SAT)
May 19, 2013I want to use some free CAM software to generate G-code for my 3D model (*.sat).
View 1 Replies
ADVERTISEMENT
AutoCAD Inventor :: Convert Surface Model Pump To Solid Model?
Oct 4, 2011Am trying to convert this pump into solid ?
View 6 Replies View RelatedAutoCAD Inventor :: Convert Surface Model Into Solid Model?
Jan 15, 2013My problem today is that I made a Model of a Part of a ship using surfaces rather than solids because the engineer thought it would be easier to bring into ANSYS program for analysis but he is now having a problem with it and I am looking into converting my current model to solid. I can do it but the method I thought of using is quite long winded and we are working to a tight deadline.
1.open up the surface part
2.use "Offset/Thicken"
3.any clashes between parts make a sketch and cut away.
the problem is the amount of plates I have and the time it takes to sort them out.
AutoCAD Inventor :: Dim Errors In Model By VBA Code?
Dec 6, 2011I am using below code to create a Rectangle 4 mm X 3 mm x 1 mm, I am using mm template but the model shows 40 mm X 30 mm x 10 mm.
Private Sub CommandButton1_Click()
Dim oProjectMgr As DesignProjectManager
Set oProjectMgr = ThisApplication.DesignProjectManager
Dim oTemplatesPath As String
[code]....
AutoCAD VB :: Convert Lisp To Visual Basic Code?
Oct 1, 2013can more easy convert lisp to visual basic code?
View 1 Replies View RelatedAutoCAD 2010 :: G-code From 3D Mesh Model For CNC 3axis Machine?
Sep 25, 2012create a G-code from an AutoCAD desktop 3D model of a 1911 pistal grip saved as a DXF file. I have a CNC 6040 3 axis routing machine. I have tried to load the DXF file as an import but the file is not recognized by the Mach3 software.
I have downloaded a lisp comand for my AutoiCAD program which is supposed to generate a G-code within Autocad but It doesnt recongnized some 3D elements. I am having a dificult time getting the generater to read a "mesh" 3D form to generate a G-code. I hope this doesnt sound all too confusing... the bottom line is I cant seem to get a G-code out of a 3D CAD form....way to generate smoothly a G-code from an AutoCAD 3D form?
AutoCAD Architecture :: Stack / Color Code Model Tabs
Aug 2, 2012I have 2011 adt and was asked some questions about the model tabs.
Can we stack the model tabs? If so, how? Can we color code the model tabs?
AutoCAD Visual LISP / AutoLISP :: Code To Convert All Lines
Sep 18, 2013I need a lisp code to convert all Lines, Polylines, Arcs and Splines to Polylines with 0.4 width.
I prepare this:
(defun c:CH2pl ( / SS);changes all lines, plines, arcs and splines to POLYLINE with 0.4 width(if (setq SS (ssget "_X" '((0 . "LINE"))))(command "_.pedit" "m" SS "" "Y" "w" 0.4 ""))(if (setq SS (ssget "_X" '((0 . "*POLYLINE"))))(command "_.pedit" "m" SS "" "w" 0.4 ""))(if (setq SS (ssget "_X" '((0 . "ARC"))))(command "_.pedit" "m" SS "" "Y" "w" 0.4 ""))(if (setq SS (ssget "_X" '((0 . "SPLINE"))))(command "_.pedit" "m" SS "" "Y" 10 "w" 0.4 "")))
But I want pure lisp code in a professional way!
AutoCAD 2010 :: VBA Code To Convert DWG (with All Layouts) To Single PDF File
May 11, 2012I would like VBA to convert all layouts in drawing to single .PDF file.
Now I can convert it to PDF file with separate PDF files, but not know process to convert to a Single PDF file with all .DWG layouts.
AutoCAD Inventor :: Convert Surface To Solid Model / Turn Off Yellow Edges In Surface Model
Mar 4, 2008We received a surface model from a vendor that I have patched up as best I can, it still has one hole that I can find that I haven't been able to fill. Ideally we would like to have a solid model, but I'm running out of time to get this done and the surface model we have would be good enough for our purposes IF I can get the yellow surface tangent lines to turn off or change their color to black.
I've attached a jpg of the surface model with the yellow lines and uploaded the model here: [URL].....
Illustrator :: Convert YS Color Code To Either CMYK Or RGB
Apr 19, 2013I need to find a way to convert YS color code to either CMYK or RGB (doesn't matter which).
View 1 Replies View RelatedGIMP :: Convert Pictures Into HTML Canvas Code?
Jan 29, 2014I have been using Gimp with a drawing board for cartoon pictures. Now, I like to create simple animation from the pictures that I made. Is there any way Gimp can convert pictures (whatever format) into HTML canvas code?
View 1 Replies View RelatedIllustrator :: How To Convert Artwork From CMYK To Pantone Code
Dec 25, 2012Currently, i receive artwork in CMYK but i need to resubmit to painter using Pantone.? i have installed Illustrator CS6 recently and not familar with the software.
View 4 Replies View RelatedAutoCad 3D :: How To Convert 3D Model From SAT To DWG
Jan 16, 2014I downloaded a 3D model of a screw, the filetype is SAT, i imported to autocad but I cannot use the solprof command on the model, is there any way that i can use that command
User Library-Type SS4_2x40.zip
AutoCAD Inventor :: Convert STEP Model To IPT
Nov 19, 2012I followed up their way as URL....but still I cannot get correct solid model when I try to convert attached STEP model to IPT. I just can get surface model, but I do not solid one.
View 3 Replies View RelatedAutoCAD Architecture :: Convert 3D Furniture Into ACA Model
Dec 12, 2013I am looking for furniture content for renderings. I find some in Autodesk Seek. Most of the items are autocad 3d . It looks like they are built with surfaces. I want to make them usuable in 3d models in Autocad for architecture. I would like them to be easily accessible from the tool palletes. They seem similar to the ones that come from Archidigm. How do I drag and drop these 3d models into the tool pallette - I tried to first convert them into a blcok , but that did not work. Where can I find good furniture content, ready to drop into tool palllettes for ACA?
View 1 Replies View RelatedAutoCAD Civil 3D :: Convert 2D Picture Into 3D Model
Jun 4, 2012conver a 2D picture into a 3D model in .CAD format? This model is used for lasering.
View 1 Replies View RelatedAutoCad 3D :: Convert Model Into 2D Drawings With Different Views?
Jul 29, 2012I need to put my 3d model on a piece of paper, so I need to have annotate and different views (FRONT and/or TOP and/or Right) of the model.
I tried to use FLATSPOT command, but all annotations (dimensions) are gone. Also, is there any easy way to do annotations?
AutoCAD Inventor :: How To Convert 3D Scan To Solid Model
Nov 4, 2013I am working on a research project that requires that I scan a cast object and shell it out to a width of .125 inches. I used my school's 3D scanner to scan the cast, and I have a good model. I've made it a surface and exported it as an STP and an IGS into Inventor. I used the Sculpt feature to make it a solid object, but then I could not shell it because a few flaws in the cast made miniscule holes.
I then tried to use the scanning program's spline feature to cut the cast into splines to loft in Inventor. However, this made 5 non-connected lines at each location, so I couldn't loft. How to create a solid and then shell with either method?
AutoCAD 2013 :: Convert Wireframe To 3D Solid Model?
Jan 23, 2013I need information on how to create a 3D Solid Model from wireframe and surfaces using AutoCAD 2013.
View 7 Replies View RelatedAutoCAD 2010 :: Convert 3D Faceted Model To Wireframe Only
Jun 8, 2012I've got a very complex 3D AutoCAD model (exported as DWG) that's come from an external company that use Micro station. Ultimately I'm trying to link it into Revit, but I'm having problems doing this. What I'd like to do is convert the 3D faceted model into a wireframe ONLY model, ie. remove all the faces. (I've got another wire frame model in Revit already so I know this will work) I know you can change the 'view' by using SHADEMODE but I'd like to actually remove the faces from the model all together leaving only the lines on the 'edges'. So the Wireframe view of Shade mode is exactly what I want but I need to get those faces out somehow.
I've tried exploding it all, but that only gets rid of a few faces ...thought exporting to DXF might do it but hasn't.
AutoCAD 2013 :: Convert ACIS (SAT) 3D Model To STEP (STP)
Sep 30, 2013We want to convert ACIS(.sat) 3D Model to the STEP(.stp,.step) Model.
If yes, what is the Procedure for converting ACIS 3D Model to the STEP Model?
Note - We are using:
Software : Autocad 2012-64Bit , Naviswork 2013 , Inventor Ultimate 2014-64 Bit ,Autoplant V8i - SS4 version : 8.11.9.140 , MS-Office 2010 - 64 Bit.
Hardware : Workstation Dell Precision T3600
AutoCAD Inventor :: Model Will Not Convert To Parasolid Text File
Aug 23, 2012I am trying to convert a model from a third party software to a Parasolid text file, but it will not convert? File is too large to attach
View 1 Replies View RelatedAutoCAD Map 3D :: Feature Classes Not Listed In Convert To Industry Model Dialog
May 27, 2013When connecting to an Industry Model one can use the Convert to Industry Model dialog.Here you can select the source you want to map. This can be an FDO connection, a file (SDF, SSQLite, DWG).If you choose DWG, 4 options can be used as input/source:
AutoCAD Entities,
Layers
Object data
Block Names
However, the MAP 3D feature classes (from Classification) are not listed here, nor can I find (Hoping I am overlooking it) a way of converting mapping them to the IM. Seems the only option is to redo the classification "defintion" effort again.
If this is the case, I am getting more the impression that Map3D is becomming a bunch of tools rather then a consistent framework supporting a step by step path from CAD to GIS to Industry Model type it is being marketed.
3ds Max :: How To Convert Character Studio Model To CAT
May 31, 2012How to convert a Character Studio Model to a CAT model?
View 1 Replies View Related3ds Max Modeling :: Convert Water Droplet Photo Into 3D Model
Sep 11, 2013I'm trying to make a 3D model of my water droplet photo. Any software that can scan my photos, convert it into 3D shape?
View 2 Replies View RelatedAutoCAD Inventor :: Convert Model Parameter To Reference Parameter?
Oct 2, 2012I need to convert a model parameter to a reference parameter thru the API.
I saw this item discussed in the group before, but I cant find the thread.
AutoCAD 2013 :: Why Model Dimension Remain / When Change Model Size
Sep 20, 2012When I zoom in or zoom out the model, normally the dimension will follow the model too.But now in Autocad 2013, even the model size change, the dimension still remain unchange. why? Is there any setting I miss out? URL....
View 2 Replies View RelatedAutoCad :: Automatic Swap From Model To Paperspace When Working In Model Through Viewport
Nov 20, 2012I just got back from maternity leave and I left work at Autocad 2011 and came back on Autocad 2013. I work thru my viewports in my model space, and I've noticed that when I pan and zoom in or out or move to quickly from one point to another (didn't notice which) my model space swaps to paper even if I'm in a command. Is this something I can deactivate?
View 3 Replies View RelatedAutoCad :: Scaling Is Different In Viewport When Working On Model Than Model Space?
Feb 21, 2011I then change to my A0 template on a different tab in the same drawing, size up the model in model space within the viewport (everything still fine), then as soon as I scale the model to 1:200 the icons I've added to the drawing (I say icon it's one particular group of icons - CCTV camera icons I've made and added) suddenly become massive and three times the size.
If I add them when already at 1:200 they're fine but it only seems to do this when I actually scale the drawing.
AutoCAD Inventor :: DXF Model - File In IPT Format As 3D Model?
Apr 12, 2012I have a .dxf model and I need the file in .ipt format as a 3d model. (I got the file from a website)
View 3 Replies View Related