AutoCAD 2010 :: Convert 3D Faceted Model To Wireframe Only
Jun 8, 2012
I've got a very complex 3D AutoCAD model (exported as DWG) that's come from an external company that use Micro station. Ultimately I'm trying to link it into Revit, but I'm having problems doing this. What I'd like to do is convert the 3D faceted model into a wireframe ONLY model, ie. remove all the faces. (I've got another wire frame model in Revit already so I know this will work) I know you can change the 'view' by using SHADEMODE but I'd like to actually remove the faces from the model all together leaving only the lines on the 'edges'. So the Wireframe view of Shade mode is exactly what I want but I need to get those faces out somehow.
I've tried exploding it all, but that only gets rid of a few faces ...thought exporting to DXF might do it but hasn't.
I'd like to export AutoCAD file from a model built in 3Ds Max to get some engimeering drawings(as below) But the dwg file export from 3Ds Max is always with the wireframe(as the last one)
I am in need of creating a solid drawing from my wireframe drawing in model space. I have never done any 3d modeling in autocad before it took me a few days just to get the wireframe of a staircase done! I have tried to render this object in viewport but it disappears after I click on it or move around, therefore I cannot see it in my paper layout. How do I make a rendered object stay? Also I want to plot this on 22x34in and 11x17in paper, how would I go about getting a high quality rendered image. I am using autocad 2010.
I'm not looking to RENDER wireframe, I'm looking to export a model as ONLY a wireframe out and bring it into After Effects.
Essentially, I am trying to bring an .obj into After Effects using the plugin Element 3D. While I'm aware I can simply import the model as-is into Element 3D and use the wireframe texture that Element 3D comes with, I was wondering if it's possible to just export a model out of Maya in it's wireframe state. I wasn't 100% sure if the wireframe state was just a view or not.
i'm currently learning maya 2011..my problem is that sometimes when i use the split polygon tool or the edge insert tool and some others A PART OF MY MODEL goes into wire frame mode not the whole model and even if i undo it still doesn't work..in the perspective viewport under shading i have selected 'smooth shade all'.
I'm using 2D wireframe as my default view while extruding some solid pipes. Everything appears to work fine, but when I switch to any other shademode eg. 3D wireframe, some of the pipes disappear. In Navisworks they show up as listed objects in the selection tree but cannot be displayed and more imporantly do not get considered in clash detection.
I can't see anything different about the properties of the "hidden" pipes over any others that can be seen.
If I slice the "hidden" solids, then one half or both halves become visible like a normal solid again.
I have hundreds of pipes to model and clash so need to resolve what's happening here. Attached is a small sample file.
I have plan and elevation views in autocad 2012. I am adding a new entry to my house and I just want to see what it will look like in a perspective view or something.
I went to the library and took out a tutorial on autocad 3D drawing. After 8 hours all I can draw is a stupid birdhouse with no hole for the bird to go in. I am not stupid and I am good with computers, so I figure that I am completely missing something here.
Is there not some way for me to take my plan and elevations and just put them together like one would a paper model?
Is there not some quick and easy way to mock up parts of houses?
I am just a homeowner, and I don't want to pay an architect to do this for me. Maybe I am using the wrong tool? Maybe I need Autocad Architecture? Maybe some other product? I am very frustrated.
So here is my challenge to all of you: assume that your dad or your friend wants to build a deck for his house, and he wants to model it in 3D to see what it will look like. He has never done anything in 3D in AutoCAD, but he can draw 2D drawings. He has exactly 8 hours to learn whatever tool he needs, AND, to produce the 3D drawing.
Note: a simple wireframe drawing is fine, I can color the thing with pencil crayons or whatever after if I need to.
My problem today is that I made a Model of a Part of a ship using surfaces rather than solids because the engineer thought it would be easier to bring into ANSYS program for analysis but he is now having a problem with it and I am looking into converting my current model to solid. I can do it but the method I thought of using is quite long winded and we are working to a tight deadline.
1.open up the surface part
2.use "Offset/Thicken"
3.any clashes between parts make a sketch and cut away.
the problem is the amount of plates I have and the time it takes to sort them out.
I'm trying to make a template for a six-faceted vase form. Basically one side of a sweeped hexagon along a curved path which I would like to Flatten in Sheet Metal.
First, I have a profile:
Then, I add a hexagonal base sketch:
Next I do a sweep using the profile as a guide rail and the y-axis as the axis:
So far so good. Finally, I select one of the facets and Thicken to 1mm:
After converting to Sheet Metal and setting the Sheet Metal default to 1mm, Sheet Metal will not perform a Flatten because it cannot find any bends.
Is there any way to go about this in Inventor? Perhaps using some other method than a Sweep? Any method that produces a flat pattern
We have an interior space built out for a commercial project incorporating curved walls in 3D. We need to generate a 2D drawing to be turned over to the on-site architect. Generating a 2D section yeilds a faceted wall. AECFACETDEV has no effect on the curve quality. Is there a control for Horizontal section? Walls do not show up using flatshot so that is not an option.
We received a surface model from a vendor that I have patched up as best I can, it still has one hole that I can find that I haven't been able to fill. Ideally we would like to have a solid model, but I'm running out of time to get this done and the surface model we have would be good enough for our purposes IF I can get the yellow surface tangent lines to turn off or change their color to black.
I've attached a jpg of the surface model with the yellow lines and uploaded the model here: [URL].....
Basically I've got a detail specific to my design, I've extruded all of the layers up to their desired levels etc, but now I want to be able to rotate it all so that instead of these layers being orientated vertically, they are orientated horizontally, if that makes sense. I understand that there is something involved with the UCS but I'm not sure how to get this to work. This may be an issue with my computer as I know my laptop graphics card is pretty rubbish and impacts a lot of 3d programs such as Rhino and SketchUp so this could be the issue here
I downloaded a 3D model of a screw, the filetype is SAT, i imported to autocad but I cannot use the solprof command on the model, is there any way that i can use that command
I'm using AutoCAD Mechanical 2010 and received a .DXF file that contains 'solid' objects. Unfortunately the next tool in my workflow doesn't understand 'solids' only polylines (and a few other basic shapes like circles, lines, etc). Is there some way to convert the object in AutoCAD?
I tried the 'boundary' command but when it asks to 'Pick Points' and I click inside the solid, it always gives the error 'Valid hatch boundary not found'.
I followed up their way as URL....but still I cannot get correct solid model when I try to convert attached STEP model to IPT. I just can get surface model, but I do not solid one.
I am looking for furniture content for renderings. I find some in Autodesk Seek. Most of the items are autocad 3d . It looks like they are built with surfaces. I want to make them usuable in 3d models in Autocad for architecture. I would like them to be easily accessible from the tool palletes. They seem similar to the ones that come from Archidigm. How do I drag and drop these 3d models into the tool pallette - I tried to first convert them into a blcok , but that did not work. Where can I find good furniture content, ready to drop into tool palllettes for ACA?
I am working on a research project that requires that I scan a cast object and shell it out to a width of .125 inches. I used my school's 3D scanner to scan the cast, and I have a good model. I've made it a surface and exported it as an STP and an IGS into Inventor. I used the Sculpt feature to make it a solid object, but then I could not shell it because a few flaws in the cast made miniscule holes.
I then tried to use the scanning program's spline feature to cut the cast into splines to loft in Inventor. However, this made 5 non-connected lines at each location, so I couldn't loft. How to create a solid and then shell with either method?
When connecting to an Industry Model one can use the Convert to Industry Model dialog.Here you can select the source you want to map. This can be an FDO connection, a file (SDF, SSQLite, DWG).If you choose DWG, 4 options can be used as input/source:
AutoCAD Entities, Layers Object data Block Names
However, the MAP 3D feature classes (from Classification) are not listed here, nor can I find (Hoping I am overlooking it) a way of converting mapping them to the IM. Seems the only option is to redo the classification "defintion" effort again.
If this is the case, I am getting more the impression that Map3D is becomming a bunch of tools rather then a consistent framework supporting a step by step path from CAD to GIS to Industry Model type it is being marketed.
