I have an opportunity to make a good impression at a new job, but ive never had the initiative to learn how to write a lisp routine. at my work we make walk-in coolers and freezers. these coolers are modular with a standard wall piece measuring a certain length. these wall sections have to be numbered sequentially. is there any way to automate this? sometimes we get change order from the client and it means going back and manually changing multiple texts (sometimes in the hundreds), but i thought if there was a way these wall sections could be scheduled somehow that when a new wall panel is inserted in the beginning of the sequence it would update everything after it automatically.
how do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
I created a vector in Adobe Illustrator and there are transparent lines running through it. There are no inconsistencies in the path and this is the only file this has happened for. They are less visible while they are on a flat vector (see image 1), but they become more visible when placed as a smart object (image 2), especially when using a 3D effect from illustrator as well (image 3).
A quote from an illy user "the biggest thing that ILLY does that COREL does not appear to do , is have the SMOOTH TOOL and I use this ALLLLLL the time. ....you can simply stroke, stroke, stroke away with your pen, with one touch of the keyboard for beautiful smooth vector lines." Does Corel have one tool for smoothing vector lines only?
I scanned my signature into my computer as a TIFF file. I then edited and cleaned it up in Photoshop. Then I placed it into Illustrator and turned it into a Vector file. The problem with this though is that there are vector paths around the perimeter of the signature and not down the middle of the letter strokes as would be if I had made it in Illustrator. Is there a way that I can still make this happen?
I just converted it back to a tiff file becuas the vector lines were turning into double lines in places. I just enlarged them enough that it hid any gaps and then converted it into a tiff file to have another try at it. Would much rather work with one line though.
I have just installed Corel Draw X5 upgrading from X3. Using the program to run (2) laser engravers.
One Xenetech XLT1325 and one ULS M-300. Everything works fine until I send over a job which requires a vector cut line (hairline set to higher power to cut through plastic etc..) The vector do not appear to be recognized by either laser machine. I have tried to import the pallette that I was using in X3 but to no avail.
Whenever I use the Trace option to convert, the result is an image filled with closed objects. Because I use vector images with a laser machine, and because the laser cuts everything it reads, the "double" lines (shared lines of the objects) get cut as many times as they appear. So I have to go in and break apart and delete segments & this goes on for days. I've tried welding, but welding makes one of the objects disappear completely. I've tried changing from cdr to svg, exporting & importing, hoping it would simplify, but that doesn't work either. Is there a way to have the bitmap converted to simple lines instead of overlapping objects?
way to make a CAD drafted plan look like it was drawn by hand? Or is there a way to use a photoshop brush to draw a line that looks like the pressure was varied along the length of the line, giving it some artistic character?
I've heard of people using Illustrator for this type of thing, but all I have is photoshop. I'm on a quest to make CAD drawings look hand-drawn.
With all of you fine teachers, I have the know-how to get the start and end values of a line.
Do you think there is a way to get a point returned that represents the true intersection of the two lines, without having to involke a user defined "getpoint" function using "intersect" osnap?
i am doing a simple project making a survey plot for a piece of land that will be broken into subdivision. all measurements are of my starting point. after plotting the starting point i try to draw line that is 113 feet long and at a bearing of N 5d W i have no problem entering this data but when i hit enter it draws a straight line. now i know 5 degrees is much of an angle so i thought maybe it just looked straight and tried to plot the next point which was 542 feet from the last point at a bearing of N 39d E but once again after i put the info in and hit enter or space it would plot a line of the proper length but vertical, not the proper angle i need it at. here is how i would put in the info:
first i choose the lne command and choose my "beginning point" as that starting point for my line then i type 113<N 5d W for the length and direction and hit enter. when i do this it plots a vertical line of the proper length but wrong angle. what am i doing wrong? i have ortho set to off and idk what else to mess with
Is there any option with wipeout to turn the continuous lines into dotted lines instead of hiding the object? I have been working on one staircase block, i want to show half block as a dotted lines.. is there any way to do that without going in to the block edit and change? thats why am looking for wipeout mask option.
I know there is ipn file to create an exploded view. But if I have used a positional rep to create one. How can I automatically show the tweak lines or center lines on explode path
Inventor Professional 2013 Vault Collaboration 2013
I have selected several lines (not pl or spl), just lines, all of which are the same layer and such. I want to be able to select all thirty or forty of the lines using either the select similar (lisp, AC2010) or quick select and return a total length of all of the selected lines. In the properties box it shows as varies.
Is there any way to make 2 to sketch lines instead of floating lines so that I can dimension them?
For example, if I have a part that can change lengths and I need to print off a new drawing, it would be good if I could say that the lines were a set distance from each end of the part or some features of the part.
Then I could update the part length, then just open the part drawing and not have to adjust anything.
This isnt so much of a problem as an annoyance. When I try to make poly lines from connected single lines my procedure is as follows...
pedit, right click, multiple, select lines/objects, enter, yes, join x 3, esc
My annoyance is if i hit join once it will not make the lines into polylines, if i hit join 3 times or so and then esc it will.
It just doesnt seem that is right and I think i might be missing something. I have been doing pedit this way for a long time adn its probably finally time to figure this one out.
For some reason, GIMP is putting straight lines off of any line I draw (paintbrush, ink or pencil) and while it's pretty cool, I'd like to be able to draw properly.
I need to transform a lot of dashed (single) lines into separate lines... Who can tell me how to do this in a few clicks. I don't need an outline of the dashed line. So the black dashes I need, the white in between the dashes I want to loose.
Problem with command from Home tab - Draw panel - Curves drop-down - Create Curves Between Two Lines OR Create Curve on Two Lines.
If you select the Degree option, it draws a zero length curve when you type in a valid number for degree of curve. I have tried entering it in decimal format and as ##d##'. NOTHING WORKS!
I just recieved a structural drawing from an engineer that has the entire drawing drawn on layer 0. This poses many problems for me as I need to differentiate text from lines and lines from lines. The darwing does have two colors although entities are still on same layer. Is there any way I can seperate the yellow lines from the red lines even though they are on the same layer?