i have a problem with corel draw x4.
So: i create a document and publish it as a pdf. That works.
But when i open the pdf with acrobat the document is empty. Just a white paper.
I have just completed a 25 page document using hundreds of symbols but when I have just tried to publish it to PDF certain symbols do not appear?
I have looked back through the file and found that the ones that do not appear also no longer show the image in the symbol library but when i insert them in to the drawing they show up fine.
When I try and publish a image or document to PDF it produces a blank PDF document.
I have tried using Bullzip PDF printer but that also produced a blank PDF.
I have had this program for several years and no problems until yesterday. My computer, win7, 64 bit, did an automatic update. Now my corel draw will not run and the following error report appears.
"Unable to create a DOM document.Class not registered / Verify that MSXML4 is installed"
Can not reinstall program as the box is sitting on a shelf 800 miles away.
At the bottom of Create a New Document is a box that says Do not show this dialog again. I checked it and now I don't know how to get it back.
View 7 Replies View RelatedI've been using X3 for about 5 years.Today, I can't open the program.... a message appears
"Unable to create a DOM document.Class not registered Verify that MSXML4 is installed."
I have no idea what this message means. I uninstalled the program and reinstalled, rebooted and still the same message comes up. I use this program almost everyday, so, of course, now I'm unable to produce art for clients.
My PC is Dell Studio XPS 8100, 64 bit and Windows 7.
Error_CorelDrawa.jpg
when I create a new blank document, it size always become multiply of 10 (example Page size A4 = 2100mm x 2970mm) and in the document, when I draw a new object, it will automatical multiply with 10, too. I'm using Windows 7, and I never seen this problem before, when I using Windows XP!
I am finding missing fonts when I publish a PDF document from InDesign CC file.I tried to install the custom fonts in my system, but the installation is not getting completed.
I am using the fonts like, Akzidenz-Grotesk and Helvetica family fonts.
AutoCAD Map 3D 2010 freezes when user tries to publish the plot to a shared drive or simply creating a .plt.
View 2 Replies View RelatedI would like to create a gallery with Lightroom and publish it to my website. I would like for visitors to be able to click on a thumbnail to download a med resolution file of the image. Can this be done? I am using LR4.
View 3 Replies View RelatedI use CorelDraw Windows 7. Everything was fine for 2 days. Now, you can not publish to PDF from. We use CorelDraw for 3 years at the PDF edition for my work. Now the pdf is empty by opening acrobat and zoom is set to 5603%. I get this error when I try to change zoom to 100% "document (14)."
View 14 Replies View RelatedI have a multi page document that contains links to various large tiffs. The filesize of cdr is decent to work with and it preserves them until I publish it to pdf .
Any changes made to document after this operation will increase the document file (at the next save) like the images are embedded , not linked. However, in the links panel still show up as links, but properties of images mention their full resolution instead of a thumbnail size, and working space enhanced view show that.
I tried for test with one page and only one image and confirmed this behaviour.I couldn't find any solution to this and I keep closing the document after publishing and open it again for changes.
When I use the Publish to PDF, it either creates a PDF file that is corrupt, or Corel itself crashes (Windows 7 64) give me a "this program has stopped working" error.
I tried uninstalling / reinstalling but it still does the same thing.
I am trying to print of about 50 sheets of cross sections. When i go to an individual sheet and plot the pdf comes out fine, when i try to publish through sheet set, it put the table on top of the section view.
Additional Details
Both are creating the PDF with acroplot . I am using autocad Civil 3d 2013.
I have attached both PDF's.
I'm using CorelDraw X4 on a Windows Vista Home Basic System. Trying to "Publish to PDF" produces empty PDF Files, with a page size of 0 mm x 0 mm. The original File has a layout of (German) A4 and a textbox with "Test".
There are no error messages.Even using a PDF Printer (FreePDF XP) doesn't produce a file, but gaves the error message
"%%[ Error: undefined; OffendingCommand: -0,15789 ]%%GhostScript Error 1. Error, no PDF file produced! (False)".
I am a musician doing the CD cover of my band's 3rd CD.
On the CD back I have images, text and the usual barcode. How can I publich to pdf from X5 so my images keep CMYK and my barcodes keep Black & White? My CD label gave this comment after the pdf I sent them:
"I think you do not understand that the barcodes and codes in general HAVE TO BE IN BLACK/WHITE. You cannot just integrate it in the 4 colour artwork as if it is a picture."
I use X5 upgraded directly to SP3 and PDF file shows Corel PDF engine version:15.2.0.686
I am attempting to publish a pdf of a booklet I've been working on. It is currently set up with facing pages.
I want to publish it as a pdf, but so that it maintains the booklet format. That is, when it opens as a pdf, one should see both left and right hand pages, as one would browsing through a regular book.
How does one do this with Corel? I know once one has published, one can open the pdf and change the view setting to 'two page display.' I want this to happen automatically when the viewer opens the document though.
I am working in CorelDraw X3 and when I publish to PDF they are coming out blank? I have made many before and they are fine, I know to position it in the page, but still nothing? I am using Windows 7? By doing it through the 'prepare to bureau service' they work fine except the file size is massive?
View 3 Replies View RelatedScreenshot PDF Problem.jpg
When I publish something to PDF (in order to send it to a professional presser) the cutting lines are set on the 'bleed edge' instead of excluding the neccesary bleed margin of 3mm. In other words I am not able to provide any PDF document with a bleed margin which is (obviously) very frustrating for the pressing company as well as for me.
- In Publish to PDF > Settings > Pre-press I checked the cutting-line box ( I work with a dutch version so excuse me if the the right translations aren't used. Check attached file for the settings).
- When I check the box 'Aflopen' (just above the cutting line box) the PDF file turns out white.
I am using Corel X5 in Windows 7 OS having 4GB RAM with Intel Core i3 processor. When I converting cdr file to PDF with prepress PDF preset will resulted a crashed PDF file. But with 'web' PDF preset may results fine. But the resolution goes high or custom , output is a crashed file.
View 7 Replies View RelatedMy CorelDraw suddenly stopped to produce PDFs. The dialog "Publish To PDF" opens fine, but when pressing "Save" it won't do anything after a while of loading. Usually it starts to process the file and a progress bar is shown, but no such is shown and no file is produced. The settings opens fine and no problems there.
Re-installing has been tried without resolving the issue. Different files has been tried, same problem.
when I use publish to pdf with bitmap downsample image in cdr file deleted in pdf file. I am using Coreldraw X6 and another problem is that I have checked preserve pure black in color management. but i noticed that r0b0g0 in rgb bitmap also converted into Black100.
View 5 Replies View RelatedI regularly design multi-page design drawings for sign manufacturing, and was operating normally in X3 on a Dell Dual Core up to yesterday, when suddenly app won't successfully publish to PDF. It just spins, or produces a file that has blank pages or some huge empty file that shows it to be over 150MB in size (normally my files are under 8 MB). I tried a complete uninstall/reinstall of program twice now, but only to have same results.
View 5 Replies View RelatedI am making a Blurb photo book in CDx4. Everything goes very well. But then I try to publish the result to pdf/x3, as requested by Blurb. The colors of the bitmaps are wrong, dull. I try to publish to acrobat 4. Everything is all right. Other pdf formats seem to do very good as well.
I think it has something to do with rgb and cmyk, but whatever I try to change, it does not work. I converted the bitmaps to cmyk, I changed things in the color management (had things with that in the past -> color management off seems the best), nothing works.
Is it possible to create an interactive animation in Edge, publish it, import it into Indesign, export it as an Interavtive PDF while maintaining the animation and interactivity?
View 1 Replies View Relatedwhen I trying to publish in single-sheet file. so I type publish on my command bar, then I chose publish to pdf but when i try to click on publish options to set the location where I need to put the pdf files the publish window freeze. same thing when i click on add sheet button.
NOTE: I have this problem especialy when I used AUtoCAD from home. to use AutoCAD from home I made borrow licence.
I managed to get a nice set of different settings to publish a corel file to pdf. Now I would like copy these settings to multiple other pc's in the office. where a can find the file/folder in which these settings are being saved?
Otherwise I would have to set all different pc's individually and I rather spend my time otherwise.
When you print a file from corel you have the option to choose always overprint black, but when I make a pdf with publish to pdf in the advanced tab I have only the option to preserve document overprint, and the black text is knocked out. Is there a solution to that, other then manually setting black text to overprint fill in corel?
View 11 Replies View RelatedI am be able to publish to PDF, but unsure how to set the color mode to CMYK?
View 2 Replies View RelatedI have a cdr file with text and two bitmaps, each of which has a lens with radial transparency.
Publish to PDF outputs everything but the lens-ed bitmaps. I tried many different Publish to PDF Settings. Nothing works.
When I "convert to bitmap" each lens-ed bitmap, Publish to PDF outputs them fine.
Is there a way to automatically convert each page of a document to bitmap in the process of publishing to PDF? maybe a macro that does this?
View 2 Replies View Related