AutoCAD Map 3D :: Freezes While Trying To Publish Or Create PLT?
Jun 7, 2011AutoCAD Map 3D 2010 freezes when user tries to publish the plot to a shared drive or simply creating a .plt.
View 2 Replies
ADVERTISEMENT
AutoCAD Print / Plot :: Publish Create Different PDFs
Jul 30, 2013I am trying to print of about 50 sheets of cross sections. When i go to an individual sheet and plot the pdf comes out fine, when i try to publish through sheet set, it put the table on top of the section view.
Additional Details
Both are creating the PDF with acroplot . I am using autocad Civil 3d 2013.
I have attached both PDF's.
AutoCAD 2010 :: 2012 Publish Freeze By Clicking On Publish Options?
Oct 12, 2012when I trying to publish in single-sheet file. so I type publish on my command bar, then I chose publish to pdf but when i try to click on publish options to set the location where I need to put the pdf files the publish window freeze. same thing when i click on add sheet button.
NOTE: I have this problem especialy when I used AUtoCAD from home. to use AutoCAD from home I made borrow licence.
AutoCAD Print / Plot :: Publish Command Won't Publish
May 9, 2013Using AutoCAD 2013, myself and several other coworkers have encountered an error message when creating a pdf with the publish command. I attached a screen shot of it.
We never experienced this in earlier versions. It doesn't happen 100% of the time, but it has been recurring more in the past month. I have restarted the computer after receiving the message and then invoked the publish command after restart and it was successful. I'm not going to do this every time I publish, nor do I see the need to turn off background plotting. That just seems like a bandaid fix.
I even tried publishing with different page setups to determine if it would react differently to any page setup, but it doesn't. I attached a view of my publish window, as well.
CorelDRAW X4 :: Create A Document And Publish It As PDF?
Sep 26, 2012i have a problem with corel draw x4.
So: i create a document and publish it as a pdf. That works.
But when i open the pdf with acrobat the document is empty. Just a white paper.
Lightroom :: How To Create A Gallery And Publish To Website
Apr 3, 2013I would like to create a gallery with Lightroom and publish it to my website. I would like for visitors to be able to click on a thumbnail to download a med resolution file of the image. Can this be done? I am using LR4.
View 3 Replies View RelatedEdge Animate CC :: Create Interactive Animation - Publish / Import Into InDesign?
Jun 27, 2013Is it possible to create an interactive animation in Edge, publish it, import it into Indesign, export it as an Interavtive PDF while maintaining the animation and interactivity?
View 1 Replies View RelatedAutoCAD 2013 :: Publish To DWF Or PDF
Jul 13, 2012I have never had trouble publishing to DWF's or PDF's from the sheet set manager. Now recently, when I try, It asks where I want to save it then briefly pops up the progress box. Nothing happens, though. The box dissappears and it doesn't create any files. I have tried changing the publish options as well as the publishcollate variable. This is happening to any files I try it with including ones that it worked on just last week. Have I gotten a setting changed somewhere? I tried to run a repair on AutoCAD, but that didn't work?
View 2 Replies View RelatedAutoCAD Map 3D :: Publish DWF With Map Data
May 10, 2011I am a civil 3d user trying to learn map.
I have some cad lines/blocks that have a data table attached to them. I try to publish to a dwf with object property data (included). When I open the dwf I can not find the object data. All the object data is checked to be included under output dwf options.
What are the steps to get a dwf with object data attached to it?
AutoCAD 2010 :: Publish To PDF
Feb 27, 2013I have several drawings on paperspace and want to publish them to PDF. I create a page setup for every sheet, and set publish to "PDF" but it did not work, but when I set publish to "plotter named in page setup" it publish but by one sheet on the time. I did try to do it in different ways, according posts before but no luck.
View 7 Replies View RelatedAutoCad :: Publish Drawings To PDF
Aug 21, 2013Im using AutoCAD 2012 and am trying to publish a set of drawings to PDF but when i do it cuts off some of my title block, but when I plot to PDF the drawing is fine.
View 1 Replies View RelatedAutoCad :: Publish To PDF In Color Instead Of CTB
Jul 18, 2013I am having the following problem in one of the pc's in my company: Whenever we publish to PDF, the drawings comes out in color with an error message that says "Incompatible or missing plot style".
The plot style (*.ctb file) is correctly installed. It also can't be incompatible because the rest of the office, with the exact same installed software, uses it without a problem.
The funny thing is that when one plots to pdf (not publish), the drawing comes out fine. Funnier than that is that when I modify the publish options to publish to plotter named in page setup (which is the plot-to-pdf that worked before), it will have the same "incompatible" crap-of-a-problem and print in color.
Finally, I tried to publish the exact same files with the exact same ctb file from another computer and there is no problem.
The problem happens with both AutoCAD 2012 and AutoCAD 2013.
AutoCad :: PDF Output Using PUBLISH
Jun 14, 2011When you PUBLISH to PDF, is there an option to not have the filename before each Layout tab? I get tired of renaming files when I'm doing a quick job that doesn't require use of the SSM. When I publish using the SSM it works fantastic but not if you simply initiate the PUBLISH dialog box via the command line.
View 9 Replies View RelatedAutoCAD 2010 :: Publish To PDF Margins
Sep 16, 2010When I publish to PDF, is there a way to reduce the margins of the PDF? When I plot or publish to PDF, the program cuts off a large amount of my layout. I would like to set the margins the same as for my plotter.
View 9 Replies View RelatedAutoCAD Inventor :: Publish DWF To Autodesk 360?
Sep 2, 2012Simple 1-click feature to publish an inventor file to DWF AND send to the Autodesk 360 account for mobile viewing purposes?
To me this would seem to be one of the primary workflows of an online service?
I am interested to know how others have been publishing their Inventor parts and drawings to 360 for viewing and also potentially whether this workflow is under development in the pipeline.
AutoCAD LT :: Publish Command Via Script
Sep 21, 2012We are using a mixture of ACAD 2012 & LT2012. The command '-PUBLISH' is recognised in ACAD2012, but not in LT2012. Therefore several scripts that we have, to publish a .dsd file, do not function on the LT2012 machines.
What are the alternatives?
The end scenario is to be able to create a multi-sheet pdf file, from an .dsd file (that is automatically created via excel), by using a combination of .bat and .scr files - without user intervention.
NB: The .dsd file contains a list of page set-ups that are various views within a single .dwg file.
AutoCAD LT :: Publish To Multi-Page PDF
Dec 19, 2012I am using AutoCAD LT 2009. I have AcrobatPro installed on my machine as well.
I seem to have lost my ability to publish a a bunch of dwg files and have one PDF file as the output. It used to work fine...I would hit publish, add all my dwgs (all model tabs), configure all page setups to be one of my Adobe PDF options (I have few configured, one for color, gray, B&W, etc), hit the publish button and then adobe would be prompt me for a file name, and then voila - I have one multi-page PDF of my drawing set.
Where it got lost and what happened, I don't know. As for trying to fix it, I have tried everything below, but nothing that gets me back to where I was:
1. Tried using the built-in "DWG to PDF." At best, this will automatically generate a PDF for each drawing without any input from me. I then used Adobe to combine all the drawings into one file. I could live with this, however, the resolution of the PDF's is not enough. I even tried changing the resolution setting to 1200dpi...stills comes out bad.
2. Using the "Adobe PDF." I get prompted by adobe for a filename for each dwg. This is very tedious. However, the output files look nice and much better resolution than #1.
3. There seem to be a lot of mention in hte forums to a system variable PUBLISHCOLLATE. This does not exist in my list of system variables (maybe because I am using LT). I tried setenv command to create the variable and toggle it from 0 to 1...this does not affect anything.
4. Within the Publish Dialogue - There is no mention of PDF anywhere. My only options for 'Publish to' are 'Plotter named in the setup' or 'DWF'. Within the Publish Options, nothing related to PDF...only options for DWF. I have tried changing these anyway, not affect.
5. Toying the pc3 - I tried changing some settings with PC3 file (Adobe PDF and DWG to PDF)...nothing fixed the problem. I tried setting collate from NONE to REGULAR, tried changing port to AUTOSPOOL, PLOT TO FILE, PLOT TO THE FOLLOWING PORT...nothing worked.
AutoCAD LT :: Auto Publish Does Not Generate Anything?
Jul 24, 2012I am wanting to set up my cad so that when I save a file, a *.pdf file (with the same name as the saved *.dwg file) is automatically generated and dropped in a specific folder. I think that the auto publish should do this for me, but have been unable to get it to generate anything. When I hit save it is prompting me to do the publish, then after I say yes, it shows a brief status bar as if it is working, but when I try to go to the folder to which the publish option is mapped it is still empty.
View 9 Replies View RelatedAutoCAD Map 3D :: Publish DWF3D With Material?
Feb 22, 2013I know that function to publish to DWF3D is from AutoCAD but I've only MAP3D software, so I post here.
I've a DTMs using 3D face and a custom materials.
I've cylinders (3D Solid) with material for pipes.
When I publish to DWF3D (DWF format or DWFx format)
- if I include only 3DFace, material is atttached and visible in ADR2012 (DWFx file size 500Ko)
- if I include 3DFace and 3DSolid, materials are not included and not visible in ADR (DWFx file size 250Ko)
- If I explode my 3DSolid to surface and region, materials are not included (DWFx size 250ko)
- if I convert my 3DSolid to 3DFace, all material are visible in ADR (DWFx size 600ko)
- If I include 3DFace and 3DSolid, but use Options to select objets, material are included where there is no 3DSolid, but 3Dface above and around 3DSolid have no material.
I've tried from MAP 3D 2012 and MAP 3D2013 (64bit), results are the same. I use ADR 2012 instead of 2013 because there is a bug in relative hyperlinks in ADR 2013. But according to the size of DWFx I think problem is in AutoCAD not in ADR.
Did you succes to publish 3D solid & 3DFace with materials in ADR?
AutoCAD Map 3D :: Publish DWF With Attributes - 2012?
Nov 16, 2011There's supposed to be a way to publish a map to DWF and include attribute data from gis feature sources and joins, but I'm not able to get it to work, so perhaps I'm doing something wrong.
I have a map displaying parcels from an SDF connection and have joined it to a non-spatial SQL Server table so I can theme on ownership. The map displays exactly what I want, so now I would like to publish to DWF with attributes, but when I go to MAPDWFOPTIONS, the window doesn't present a list of attributes to select, it is simply blank. Have I missed a step someplace?
I'm using Map 2012 SP1 on WinXP SP3.
AutoCad :: Publish Multiple Tabs To PDF
Nov 9, 2012I am trying to publish multiple tabs in to PDF. But when I do publish command, I get one PDF for each tab, I don't want that. I want all the tabs to be plotted into one PDF. I tried going into the option of publish and set it to multi-sheet dwg, but that doesn't seem to solve the issue.
BTW I am using Acad 2009.
AutoCad :: DWG To PDF Publish Save Location?
Dec 13, 2011Perhaps I have changed a setting inadvertently, although lately the following has been occurring when using the built in AutoCad DWG to PDF plot:
- if I plot a single sheet, I can choose the save location and it is all good
- if I go file publish and print multiple layouts at once (into the pdf), I am not given the option of where it can be saved, instead it is saved in the location the last pdf was (annoying when that is different job folders etc)
What do I need to change to fix it so I can always choose the save location?
AutoCad :: Publish Window Popup?
Jun 28, 2013how in the world do I get rid of the little popup in the attached picture?
View 5 Replies View RelatedAutoCad :: Publish DWG To Multiple PDF Or DWF Files?
Apr 15, 2013I have a client that needs me to deliver my drawings in PDF format as multiple files with a specific naming convention. What I am doing is publishing to multiple files then renaming each file individually which is time consuming and prone to error.
I was hoping to come up with a way to automate the process.
Here's what I have: Each layout contains a title block block, lets call it "tblock". Within this block there are attributes for drawing title, sheet number etc, lets call these attributes "dt", "sn" respectively. Each layout also contains an Xref which contains a block which has attributes for revision data such as date, revision, issue description etc Lets call the xref "XA1", the block "Xtblock" and the attribute I need "Xrev". In visual basic it might look something like XA1.Xtblock.Xrev
Here's what I need: export each layout as {sn} {dt} Rev {Xrev}.pdf
Now I have used VB to automate Excel tasks and create Database applications so I would describe myself as "handy", just not used VB within Autocad before. I have also not used LISP before either so I'm a bit of a layman in that respect.
AutoCad :: PDF Is Being Trimmed After Publish Or Plot
Jun 15, 2012After either publish or plot-to-pdf, the pdf sheet of one file is being shown trimmed. I have attached two images of both, the pdf result and the layout screen shot to show the problem.
For your consideration, this problem appears in both ACAD 2010 and 2012, in cpu's that otherwise publish/plot correctly to pdfs. The problem seems to be file-related.
Also, the unwanted croping seems to be some sort of frame around the drawing; however, as you can see from the layout screenshot, the Page is correctly setup as the sheet shadow includes all of the drawing intended to be printed.
AutoCAD 2010 :: Publish In Background?
Apr 28, 2010When I publish a set of drawings in the background, the AutoCAD app keeps stealing focus of my open windows for each sheet that is processed. This seems to defeat the publish in background option. This was not an issue with 2008.
how to keep AutoCAD from stealing focus
AutoCad :: PUBLISH To PDF Produces No Results
Dec 12, 2011I've got an issue which is preventing me from being able to PUBLISH multiple DWGs to PDF.
I can successfully PUBLISH multiple DWGs to hard copy with no problem - and it is very easy.
However i seem to be missing something when trying to PUBLISH to PDF.
Ive tried creating a 'Page Setup' which nominates a PDF writer (Adobe PDF or PDFCreator) and the printing device, and that will only work for 1 of the specified DWGs. I have also tried specifying 'PDF' in the "Publish to:" pulldown in the PUBLISH dialogue box - which returns no result. The PUBLISH dialogue box closes and nothing else happens.
AutoCad :: Publish Command Not Working
Jul 3, 2013My company just switched over to AutoCAD 2014 and for some reason the PUBLISH command is not working, or following through with the printing once we complete the required steps to plot.
We are able to select the drawings to be plotted (8"x11" sheets), then successfully bring in our page setup that we created with one of the drawings to be plotted (which we use the same template with the same limits on ALL of our 'drawing templates' we design with.
After we hit the PUBLISH button at the bottom it goes into the background and just stays there with no errors or anything After a little while we end up just having to cancel and plot individually.
We used TrueView to BatchPlot which is identical to the batchplot(publishing) in ACAD 2014 WITH NO ISSUES!
AutoCAD LT :: 12 Freezes With Windows Clipboard
May 5, 2011My autocad lt 12 crashes when I try to copy or cut to the windows clipboard. It only does this in some older drawings. I have to kill autocad and restart. I use copy and pasting between drawings quite extensively. I am desparate for a fix for this I use Windows 7 64 bit.
View 7 Replies View RelatedAutoCAD 2010 :: Freezes While Starting?
Nov 4, 2013AutoCAD has been freezing randomly when I start it. It will get to the screen below (top image) and.... that's it. It stays that way and does not change. I have waited up to 15 mintues before restarting my computer as trying to start AutoCAD again doesn't seem to change anything.
I have learned that the Devices and Printers window will also be blank when this occures (bottom image). I can now predict when AutoCAD won't open by opening the Devices and Printers window first. I think the issue is unrelated to AutoCAD, rather the issue is my computer not refreshing the Devices and Printers. When CAD is loading the list of available printers it can't find any so it continues to look and.... never gives up.... I can't even print a PDF from Adobe Reader while the Devices and Printers window is in this state (this is actually how I found that the Devices and Printers window was blank). I have not tested to see if ALL applications fail to print, but that is a separate issue.
what is causing my computer not to open the Devices and Printers window successfully?
I am running AutoCAD 2011 64 bit, windows 7, Novell Network.
AutoCad :: Freezes Up When Regenerating The MODEL?
Sep 19, 2013I'm drawing polylines within a chart of elevation contour lines of a mountainous region in my country.
This is for the design of the drainage hydraulics of highways.
The Contour Chart which is in jpg format, I have saved it in photoshop in medium size to make my autocad drawing the less heavier in size.
In fact, my AutoCAD dwg file is only 69 KB big. I have however georeferenced my Chart by UTM coordinates, so it is a little bit big in the drawing.
My drawing is in milimetres and the chart size is: 3861 x 2848.
Here is the layout view of my drawing: Regen problem.jpg
What is making my AutoCAD crash all the time when I regenerate the model?
Is there anything I can do to stop this from happening?
I try to save my drawing all the time though, and whenever my AutoCAD crashes I have to close it up, then I have to open AutoCAD and the drawing again; but this is a bit tedious.