I have had this program for several years and no problems until yesterday. My computer, win7, 64 bit, did an automatic update. Now my corel draw will not run and the following error report appears.
"Unable to create a DOM document.Class not registered / Verify that MSXML4 is installed"
Can not reinstall program as the box is sitting on a shelf 800 miles away.
I've been using X3 for about 5 years.Today, I can't open the program.... a message appears
"Unable to create a DOM document.Class not registered Verify that MSXML4 is installed."
I have no idea what this message means. I uninstalled the program and reinstalled, rebooted and still the same message comes up. I use this program almost everyday, so, of course, now I'm unable to produce art for clients.
My PC is Dell Studio XPS 8100, 64 bit and Windows 7.
I have CoreDraw X5 installed on my computer. A friend of mine e-mailed me a CorelDraw document she created. I am un able to open it. When I try to open it, CorelDraw opens but does not display the document. So the application is open and I see all the toolbars and everything but the space where I would see the document is grey. I have received CorelDraw documents by e-mail form other friends before without any problem, so it is not the e-mail that is the issue.
View 16 Replies View RelatedI have been running corel x5 for about 2 years now and all of a sudden I tried to open a new blank document and it crashed the program saying that Corel Draw has encountered a problem and needs to close??
View 3 Replies View Relatedi have a problem with corel draw x4.
So: i create a document and publish it as a pdf. That works.
But when i open the pdf with acrobat the document is empty. Just a white paper.
At the bottom of Create a New Document is a box that says Do not show this dialog again. I checked it and now I don't know how to get it back.
View 7 Replies View RelatedError_CorelDrawa.jpg
when I create a new blank document, it size always become multiply of 10 (example Page size A4 = 2100mm x 2970mm) and in the document, when I draw a new object, it will automatical multiply with 10, too. I'm using Windows 7, and I never seen this problem before, when I using Windows XP!
I`m using the AutoCad Version 2010 and since last friday I`m not able to Plot PDF datas anymore.It shows the Error "Invalid Window"..But it worked hundreds of times before in the same way.
View 3 Replies View RelatedOld PC died. Bought new PC, installed my Adobe Elements 6 but now I am unable to send photos by email from Adobe Elements 6 via email anymore. Using win7 and Windows Live email. I have tried uninstalling the program and re-installing.
View 2 Replies View RelatedI'm using Inventor Professional 2014
I created several Parts with the Shaft Generator, and from one moment to another it always says that it can't update the part file with the new shaft when I press Ok.
Here is the original error, I'm german, so of cause its in german, but i discribed above what it says:
Komponente C:UsersManuelGoogle DriveProjekteEigene ÜbungenTest2Konstruktions-AssistentWelle1.ipt konnte nicht aktualisiert werden. Welle konnte nicht erstellt werden.
I just had to replace an computer running xp with one running windows 8 and after installing X5 I find I cannot scan any more. I see some posts about X6 on this but nothing about X5
Canon MX870 and I did download the 64 bit drivers for it.
When I open previous artwork files, to maintain or update, one of my fonts disappeared. Coreldraw does recognize the font when I open the artwork file, but within the artwork the text in this paticular font is blank. It's called Trajan Pro. All my other softwares recognize it and I can use it, except in Corel. Not sure how to get this fixed, since I never had this problem before.
View 2 Replies View RelatedI regularly design multi-page design drawings for sign manufacturing, and was operating normally in X3 on a Dell Dual Core up to yesterday, when suddenly app won't successfully publish to PDF. It just spins, or produces a file that has blank pages or some huge empty file that shows it to be over 150MB in size (normally my files are under 8 MB). I tried a complete uninstall/reinstall of program twice now, but only to have same results.
View 5 Replies View RelatedEffects->Adjust->Brightness/Contrast/Intensity
Effects->Adjust->Color Balance
Effects->Adjust->Gamma
Effects->Adjust->Hue/Saturation/Lightness
None of the above work [as expected] any more. I think this happened after the 6.3 Update.To replicate the problem:
1. Fire up CorelDRAW
2. Draw a closed shape and fill it with a color of your choice.
3. Open any of the above effects mentioned in the first post.
4. Try moving any of the sliders and see what happens. (Try with both the preview button locked and unlocked.)
I am sure you will notice what I mean. Surprisingly, they all work as usual, once you convert the vector object to a bitmap!
I update to 6.2 version and one feature i missing is the ability to drag and drop images from Google images on firefox to Corel. Before the update works fine...after its only import the name of file like " Kgcjfdag.bmp" and not the image. But in IE works fine.
View 14 Replies View RelatedUnable to print document on windows CS6.6..Not enough memory was available or an object was too complex. Reducing the size of this document window may work. Document was created on mac book pro CS 16.2.1.
View 3 Replies View RelatedI created a document profile and saved it in the appropriate folder:
C:UsersusernameAppDataRoamingAdobeAdobe Illustrator CS6 Settingsen_USx64New Document Profiles
I then needed to remove it, but it keeps coming back. I deleted the file (even from the recycle bin), deleted my preferences, and rebooted the machine. But when I start Illustrator, as soon as I press Ctrl + N or choose File/New, the profile automatically gets recreated in the New Document Profiles folder and shows up in the Profile drop-down list of the New File dialog.
I am unable to open my own pdfs in my Photoshop (ones that I have created in same Photoshop).I get the message "This is not a valid Portable Document File (PDF) document. It cannot be opened."
I have to keep recreating the art...ugh!! Is there a way to pull up history to replicate my artwork until I get this resolved?
I purchased Designer Pro 9 about a month ago. I have tried about 30 times, no kidding, to change the US Letter template from Arial 10 to Verdana 12. It happened again this morning and I've decided to finally come to the forum and find out what's going on.
Here's what happens: I open US Letter and make the changes, then choose Save Template. When I reopen it, it's still Arial 10. Makes no difference if I choose "Use as default template" or not. I even tried saving it as a template with a different name, Verdana 12, but it still opens as Arial 10.
As a test, I opened Designer 6, chose New, US Letter, and changed the font to Brussels 12. I then selected Save Template, saved it as Brussels 12, and closed out. Then I chose File/New/Brussels 12. It opened as a letter template with Brussels 12 point. That's the procedure I used years ago to change US Letter to Verdana 12 in Designer 6, and so the Save Template function still works in that version.
Because nothing I've tried seems to work, I am wondering whether any template I create will be saved in 9.
I am unable to reset the inside margins on an existing document. Editing "Document Preset" for inside margin has no effect on the document - I can change the numbers to any value with no effect on the document. Changing gutter has no effect. I have tried setting margins in the master pages, also no effect. I can change margins by right click on an existing text frame (text frame options), but this only allows setting left or right frame margins for the whole document.
View 3 Replies View RelatedI am a casual photoshop user. I need to design a tagged pdf documents which is accessible to use with Dynamic PDF. When I searched online, lot of people are using Indesign but I have never used it. So, is it possible to create tagged pdf document from PS or I need to learn Indesign?
View 1 Replies View RelatedIn InDesign it is possible to create links within a 'document', i.e. non-web hyperlinks.
Is it possible do to this in Illustrator?
I'm putting together some design specs and I want to create a clickable table of contents that will navigate to a different section of the document. IE. artboard #27
From what I've seen thus far it looks like I can add links but only to websites and they are only clickable in PDF mode.
Is it possible at the very least to make my clickable TOC when converting my document to a PDF? and, is it possible to make it clickable even if it is in .ai format?
I have been trying to create a PDF of a 36 page document. However, when I get to page 6 I get a message 'downloading font' and then the programme hangs and I have to use windows task master to close it down. There are only three fonts being used on the page and according to Font Finder no fonts are missing. This is driving me crazy and I'm fast approaching my printers deadline.
View 4 Replies View RelatedDownloaded an image from iStockPhoto. Opened up in Illustrator and removed the black background because I want to set my own values for the black background in InDesign.
Noticed that there are several "bubbles" of black background behind the main image that contain radial gradients.
These "bubbles" fade from a dark blue in the center out to black on the edge. Again, I want to be able to set this "black" to the value of black that I want to use for the background of the card. When I click on one of the bubbles, I see in my Gradient palette that it's a radial gradient and the value on the left of the slider is 100, 75, 0, 50 which I can see in the Color palette. But I can't change anything there. On the right of the slider in the Gradient palette is the "black" which is 80, 50, 0, 100.
So, how do I modify the value of that black? If I choose "new swatch" in the swatches palette, it just creates a new swatch called "New Gradient Swatch 1" It shows Process Color for the color type below which is greyed out as well as everything below that. how do I go about changing the black on that gradient?
I just recently re-installed CS4 onto another computer and now I can't select "Custom" in the size when creating a new document.
View 1 Replies View RelatedHow would I import a Microsoft Word Document into Lightroom Module inorder to create a slideshow with the document?
View 1 Replies View RelatedCurrently I have 30 .xar files that I have to export one by one to PDF, then I have to use a terrible PDF stitcher that cost me $30. Is there a way in either version 6 or 7 that enables you to create a single .xar document but actually have multiple pages within it?
View 5 Replies View RelatedI have opened a document with several xref and i want to add new entityes into those xref. How can i do?
We launch _refedit/_refclose commands in AutoCad Command line for this. I want to do the same in Autocad.NET
if there is any way to create a new 'FeatureBasedPattern' within an assembly document. I have 2 assembly occurences - parts. In the Part1 i created a RectangularPattern of workpoints. The Part2 is going to be used in the new pattern. I tried the following VBA code, but it doesn't work.
Dim oPart1 As ComponentOccurrence
Set oPart1 = oAssDef.Occurences.Item(1)
Dim oPart2 As ComponentOccurrence
Set oPart2 = oAssDef.Occurences.Item(2)
Dim oTG As TransientObjects
Set oTG = ThisApplication.TransientObjects
[code]...
The Call function breaks with: "Invalide procedure call or argument". I also tried "Set oAssemblyPattern = oAssDef.OccurencePatterns.etc...." instead of Call function, but with the same result. Same error for declaration change of "oAssemblyPattern" to "FeatureBasedOccurrencePatternProxy".
I recently u[graded from a very old Illustrator version to CS6 and I noticed the crop tool is missing. It used to be really easy in the old version to drag the crop tool around the area in question and crop marks would be generated automatically. Then I could save and print just that area only. Now this tool is gone and I am having trouble with finding a way to define the area I want to save or print. When i generate crop marks and then save, all i get is a file with plenty of white around it that also shows the crop marks....
View 2 Replies View Related