InDesign :: Unable To Reset The Inside Margins On An Existing Document
Mar 27, 2014
I am unable to reset the inside margins on an existing document. Editing "Document Preset" for inside margin has no effect on the document - I can change the numbers to any value with no effect on the document. Changing gutter has no effect. I have tried setting margins in the master pages, also no effect. I can change margins by right click on an existing text frame (text frame options), but this only allows setting left or right frame margins for the whole document.
We are designing a book in Id and already have a dcument defined. We have searched high and low. But we find nowhere to change the margins of the document, post-creation. (Of course those options present themselves, during document creation itself.)
1) I am going to consistently need to merge into a document that I will also set up with mulitple records with the same margins, spacing, etc. Is there a way to 'save' templates so I don't have to start over each time I create a multiple record layout??
2) If I want to merge in a single document, but have the same column 'name' laid out various time, do I keep inserting 'name' from the data source? How will it know to proceed to the next one on the list and not repeat the same one over and over?
Someone sent me a zip drive with links to fonts used in the original document being worked on, how do I link the font from the files saved on the zipdrive?
I've just opened a few of my files in inDesign CC and I am unable to select, move, edit any of the existing text or images. I'm only able to add new things on top of it
It's like the page is locked, but I see no indication that it is locked.
i'm in action schematic and if i reset any node (for example images/surface) then some parameter is still not affected. For example : the blend type and surface type and couple more are not affected by that reset function. Is this a bug ?
CorelDraw X6 Patch 3 HF 1 (although this seems consistent across a number of versions)
We've noticed in some of our files (especially files that have been around for a long time) that the Document Properties lists a lot more fonts than are actually used in the file. Additionally, other users are prompted to replace missing fonts that aren't used in the file either.
Is there some way to have CorelDraw rebuild/purge its Document Properties (or at least the fonts)?
I am trying to move pages from one document to another. I have used all methods-drag and drop, using the move menu from the pages panel, etc. However, when I do move the pages, the pages that I moved appear in the new document with the master page items from that document on them, which I do not want. Also, I have multiple master pages in each document.
A client sent an InDesign IDML file. I opened it at exported its stories as .txt files.
When I tried to place the texts in a new InDesign CS5 document, the text displayed strangely. Mostly, I see rectangles with exes through them. It looks likethe headers of an unreadable format. Some of the characters are normal alhabetic glyphs.
When I open the text files in TextEdit, they display normally. If I copy and paste, the texts look fine in the InDesign document.
What could cause this problem, and how can I fix it?
I have been trying to create a PDF of a 36 page document. However, when I get to page 6 I get a message 'downloading font' and then the programme hangs and I have to use windows task master to close it down. There are only three fonts being used on the page and according to Font Finder no fonts are missing. This is driving me crazy and I'm fast approaching my printers deadline.
My goal is to be able to store any object type (mainly an image jpg/bmp) inside a part that is not accessable through the normal user interface to be used with my addin.
I have been searching around and it seems like GetPrivateStream is the way to go.
Any working example of GetPrivateStream in vb.net and confirm if it actually stores the data inside the part.
I can't find a solution anywhere or any decent referencing material for this. If there is a better method of achieving this?
I would have thought that if I click on an object (in the document area) it should select the layer. But this does not happen. In order to select an layer, I have to select it from the Layers palette.
So is there any way I can select an layer inside the document area?
I am trying to place an .eps image on an InDesign document, however, the blue bounding box in Illustrator is cropping part of the image. I can see the full image in Illustrator. Maybe the bounding box is too close to the edge of the logo? Below is the what it looks like when I place it in InDesign and what it looks like in Illustrator. Is there a way I can include the missing part of the image? I am not the creator of the logo and received it from another company.
My InDesign CS6 cannot function hardly at all when I try to edit this one 10 page document. It has a lot of graphics, but still, what should I do? Do you think the file is corrupt? My InDesign works well with all other documents. I have seen this before with some 4 pg documents that have a lot of pictures. Should I be making them as books rather than documents? I've never used the book setting before.
I am working on a large price list document of 200 pages. Basically it's a very long table which spans the whole 200 pages and is formated to show in two columns on each page.My InDesign is working fine normally, and it allowed me to create this document ok yesterday, however, after quitting out of the document yesterday, it will no longer allow me to open it. When I try to go back into the document it crashes with the Indesign CC has stopped working error. I don't think the file is corrupt as I took a backup of it straight after quitting out of it and the backup also won't allow me back in it. (I took the backup because I had the same issue when I tried to create a similar document just after CC was launched)
Ive looked at Windows Even Viewer and the error that it shows is as follows: InDesign.exe 9.2.0.69 5297b4c4 Public.dll 9.2.0.69 [code]....
I dont get this crash with any other documents I work on.
I created a 6.25 in wide doc in ID, exported it to PDF. PDF printed doc at 5.5 in wide. I sent PDF file to coworker, who printed it to several other printers in office: same wrong-sized results. Packaged and emailed original ID doc to our local printer, who opened my original ID file and--without making any changes to it--exported to PDF and got a perfect 6.25 size! She had no idea why it didn't convert properly on my software, since it worked perfectly for her.
So, it's my software, and it's a recurring problem: I've created other PDF docs in the last few months that printed incorrectly. That's professionally embarrassing, especially since I make quite a few PDF docs for work.
I have a document that is separated into categories of information, (i.e. radio stations, newspapers, network programs, cable programs, etc.). I tried to add section markers to each page where a new section begins. But if I make edits and add information before, and a new page is created, the section marker stays on the same page and doesn't move with the beginning of the section itself. I am using a primary text frame with smart text reflow, which I assume has something to do with it. I tried changing the end of story option to "End of Section." I also checked preserve facing pages (because a section needs to start on the right page). I thought that this would make it enough text was added that a new page was created before a section marker, the new page would be created before the section marker and the section marker would move its content.
So, for example,
Section 1 (Radio Stations) first page has header that says "Radio Stations," followed by entries of radio stations Section 2 (Newspapers) first page has header that says "Newspapers", followed by entries of newspapers
So say section 1 starts on page 15, and section 2 starts on page 29. I need to add a few radio stations on any page in section 1, let's say 22. I add some information, text after flows into next pages, but the section 2 marker stays on page 29 even after the first page with header "Newspapers" has now moved to page 31.
I have an InDesign document with one missing image.The strange thing is that this image is not (longer) placed in the document. The links palette also can't tell me where the placeholder for that missing element is: There is no page number shown in the links palette, there are no elements beside the pages or on the master pages. There just don't seem to be any placeholder containing that image!Selecting the missing image on the links palette and clicking on the "go to image" button doesn't work - nothing happens.I also tried to the relink the image to a file that's existent, but the relink button doesn't work here as well.
After that I placed a file with the same name at the path InDesign expects it but now the links palette shows the link as modified and I'm also not able to refresh it.Something seems to be stuck.
Would have saved the document as .idml but unfortunately it's a document in our content management system and saving it as .idml will result in loosing all article links.Because of the content management system I'm also not able to get a PDF out of that document because MadeToPrint / InDesign Server throws an error for all documents with missing or modified links.
I have an ID-book made out of 10 InDesign documents. Everything is fine, but one thing.
One of the chapters (#4) is made out of two ID documents: "chapter4a.indd“ and "chapter4b.indd". The chapter number, which is automatically given by the book, is correct: 4. But the numbering of the next below level (4.x) is wrong. In the file „chapter4a.indd“ I have the sub-chapters 4.1, 4.2 and 4.3. But in the „chapter4b.indd“ it starts yet again with 4.1 instead of 4.4.
Where is the mistake?
Merging the two ID files "chapter4a.indd“ and "chapter4b.indd" into one is not an option, unfortunately.
Is it possible to let the sublevel chapter number (4.x) continue after the ID-document change or does it start always at ".1" once again because it's in a new document?
I'm getting a message on a print document that I'm working that reads "Document contains an invalid frame. Story text begins - Delete frame and associated story?" Regarless of my choice, ID becomes unresponsive.
I am using version CS6, I would like to know if there is an easy way to import a MS word document into InDesign. The document is about 1000 pages and contains text, images and tables.
I am working on someone elses computer and the Software settings are different. The old owner does not use this computer anymore. The swatches are set and I would like it to function how it usually does, etc. I mean, even the transparent swatch on the tool bar is not there anymore, so when I use the pen path tool, I get these white and black fills which makes it difficult for me to see the path I am meant to be following.
How do I reset Photoshop so that I can customise it the way I want it? Reinstalling the softwares is not an option.
I would like to reset Illustrator, Indesign, Dreamweaver, etc.
Is there a way to add new art boards to an existing document (same dimensions and same space betwen artboards)? What I do now is I have to create a new file (with new number of artboards) and cut & paste - is there another way to do this?
I have posted an image which is a screen snap of a revit session. Not sure how it got this way but we are unable to figure out how to reset it without restarting the program.
how do you override master pages for the entire document, not just page-by-page? I have a multi-page document and want to ba able to edit type of all pages but the text areas are locked.
We just started getting more into banner and sign printing. I have since learned that InDesign has a max size limit of 216 inches. I prefer Indesign over Illustrator but I tried with that also and that gives me a limit of 227 inches. I need to go bigger than this and it will probably be a regular problem. Is there a way to trick ID or AI to go larger?
When I export my ePub, the entire text is visible But now that I am going back to edit this document.... Change some paragraph styles, The last 25% of the text in my document is NOT VISIBLE. TRUNCATED
