We just started getting more into banner and sign printing. I have since learned that InDesign has a max size limit of 216 inches. I prefer Indesign over Illustrator but I tried with that also and that gives me a limit of 227 inches. I need to go bigger than this and it will probably be a regular problem. Is there a way to trick ID or AI to go larger?
View 7 Replies
I am workking on a very large publication (width of 150.8") and I can't seem to work with it in Photoshop. I did most of the work in ilustrator, however, I now need to add and work with photos for this publication, and to my horror, photoshop will not allow me to open the AI file without cropping or scaling it first.
View 1 Replies View RelatedI want to re size them based on document sized in 'inches' to be set by resolution say for example: If the width or height is less than 4.72 inch the image resolution should be 150dpi; if the width or height is less than 1.33 inch the image resolution should be 300dpi; and the last one if the width or height is greater than 4.72 inch the image resolution should be 75dpi.
View 2 Replies View RelatedI created a 6.25 in wide doc in ID, exported it to PDF. PDF printed doc at 5.5 in wide. I sent PDF file to coworker, who printed it to several other printers in office: same wrong-sized results. Packaged and emailed original ID doc to our local printer, who opened my original ID file and--without making any changes to it--exported to PDF and got a perfect 6.25 size! She had no idea why it didn't convert properly on my software, since it worked perfectly for her.
Â
So, it's my software, and it's a recurring problem: I've created other PDF docs in the last few months that printed incorrectly. That's professionally embarrassing, especially since I make quite a few PDF docs for work.
I have in design when i open a new document it says 51p0 instead of inches.. how do i fix it ?
View 1 Replies View RelatedHow do I make it so a new document in Photoshop uses Inches as its units instead of pixels? I have it set to inches in the preferences -> units & rulers but every time I make a new document it defaults to pixels for the dimensions. way to make that default to inches?
View 1 Replies View Relatedway to see your image passed the photoshop canvas size.
View 5 Replies View RelatedIn the Develop module, the size of my image is 4928 x 3280. How can I calculate the size of this image?Â
View 2 Replies View Relatedeverytime I open a new PS Extended document using CS6 on a Mac with op system 10.8.2 an old document opens. I can delete it in the tabs at the top but I would really like to open a fresh document without this step. I have removed the preferences file and rebooted PS Extended, and I have booted using the three finger option cmd shift but all to no avail as the new document open with the old file in the tabs area.
View 7 Replies View RelatedCan LR 4 display the image (document) size in inches? The only metadate I can locate provides this in pixels, My current solution is to open in Photoshop then to Image-Image size-document size. .
View 2 Replies View RelatedIs there a checkbox that will turn OFF hyphenation throughout a whole document, or an easy way to disable hyphenation?
View 31 Replies View RelatedI am trying to move pages from one document to another. I have used all methods-drag and drop, using the move menu from the pages panel, etc. However, when I do move the pages, the pages that I moved appear in the new document with the master page items from that document on them, which I do not want. Also, I have multiple master pages in each document.
View 6 Replies View RelatedMac OS 10.9.1 and InDesign CS 5
Â
A client sent an InDesign IDML file. I opened it at exported its stories as .txt files.
Â
When I tried to place the texts in a new InDesign CS5 document, the text displayed strangely. Mostly, I see rectangles with exes through them. It looks likethe headers of an unreadable format. Some of the characters are normal alhabetic glyphs.
Â
When I open the text files in TextEdit, they display normally. If I copy and paste, the texts look fine in the InDesign document.
Â
What could cause this problem, and how can I fix it?
I have been trying to create a PDF of a 36 page document. However, when I get to page 6 I get a message 'downloading font' and then the programme hangs and I have to use windows task master to close it down. There are only three fonts being used on the page and according to Font Finder no fonts are missing. This is driving me crazy and I'm fast approaching my printers deadline.
View 4 Replies View RelatedHow do you resize images to a specific size in inches in illustrator?
View 6 Replies View RelatedI am trying to place an .eps image on an InDesign document, however, the blue bounding box in Illustrator is cropping part of the image. I can see the full image in Illustrator. Maybe the bounding box is too close to the edge of the logo? Below is the what it looks like when I place it in InDesign and what it looks like in Illustrator. Is there a way I can include the missing part of the image? I am not the creator of the logo and received it from another company.
View 4 Replies View RelatedMy InDesign CS6 cannot function hardly at all when I try to edit this one 10 page document. It has a lot of graphics, but still, what should I do? Do you think the file is corrupt? My InDesign works well with all other documents. I have seen this before with some 4 pg documents that have a lot of pictures. Should I be making them as books rather than documents? I've never used the book setting before.
View 2 Replies View RelatedWe are designing a book in Id and already have a dcument defined. We have searched high and low. But we find nowhere to change the margins of the document, post-creation. (Of course those options present themselves, during document creation itself.)
View 6 Replies View RelatedI am working on a large price list document of 200 pages. Basically it's a very long table which spans the whole 200 pages and is formated to show in two columns on each page.My InDesign is working fine normally, and it allowed me to create this document ok yesterday, however, after quitting out of the document yesterday, it will no longer allow me to open it. When I try to go back into the document it crashes with the Indesign CC has stopped working error. I don't think the file is corrupt as I took a backup of it straight after quitting out of it and the backup also won't allow me back in it. (I took the backup because I had the same issue when I tried to create a similar document just after CC was launched)
Â
Ive looked at Windows Even Viewer and the error that it shows is as follows:
InDesign.exe
  9.2.0.69
  5297b4c4
  Public.dll
  9.2.0.69
[code]....
 Â
I dont get this crash with any other documents I work on.
I have a document that is separated into categories of information, (i.e. radio stations, newspapers, network programs, cable programs, etc.). I tried to add section markers to each page where a new section begins. But if I make edits and add information before, and a new page is created, the section marker stays on the same page and doesn't move with the beginning of the section itself. I am using a primary text frame with smart text reflow, which I assume has something to do with it. I tried changing the end of story option to "End of Section." I also checked preserve facing pages (because a section needs to start on the right page). I thought that this would make it enough text was added that a new page was created before a section marker, the new page would be created before the section marker and the section marker would move its content.
Â
So, for example,
Â
   Section 1 (Radio Stations)
    first page has header that says "Radio Stations," followed by entries of radio stations
  Section 2 (Newspapers)
 first page has header that says "Newspapers", followed by entries of newspapers
     Â
So say section 1 starts on page 15, and section 2 starts on page 29. I need to add a few radio stations on any page in section 1, let's say 22. I add some information, text after flows into next pages, but the section 2 marker stays on page 29 even after the first page with header "Newspapers" has now moved to page 31.
I have an InDesign document with one missing image.The strange thing is that this image is not (longer) placed in the document. The links palette also can't tell me where the placeholder for that missing element is: There is no page number shown in the links palette, there are no elements beside the pages or on the master pages. There just don't seem to be any placeholder containing that image!Selecting the missing image on the links palette and clicking on the "go to image" button doesn't work - nothing happens.I also tried to the relink the image to a file that's existent, but the relink button doesn't work here as well.
Â
After that I placed a file with the same name at the path InDesign expects it but now the links palette shows the link as modified and I'm also not able to refresh it.Something seems to be stuck.
Â
Would have saved the document as .idml but unfortunately it's a document in our content management system and saving it as .idml will result in loosing all article links.Because of the content management system I'm also not able to get a PDF out of that document because MadeToPrint / InDesign Server throws an error for all documents with missing or modified links.
I have an ID-book made out of 10 InDesign documents. Everything is fine, but one thing.
Â
One of the chapters (#4) is made out of two ID documents: "chapter4a.indd“ and "chapter4b.indd". The chapter number, which is automatically given by the book, is correct: 4. But the numbering of the next below level (4.x) is wrong. In the file „chapter4a.indd“ I have the sub-chapters 4.1, 4.2 and 4.3. But in the „chapter4b.indd“ it starts yet again with 4.1 instead of 4.4.
Â
Where is the mistake?
Â
Merging the two ID files "chapter4a.indd“ and "chapter4b.indd" into one is not an option, unfortunately.
Â
Is it possible to let the sublevel chapter number (4.x) continue after the ID-document change or does it start always at ".1" once again because it's in a new document?
I'm getting a message on a print document that I'm working that reads "Document contains an invalid frame. Story text begins -Â Delete frame and associated story?" Regarless of my choice, ID becomes unresponsive.
View 7 Replies View RelatedI am using version CS6, I would like to know if there is an easy way to import a MS word document into InDesign. The document is about 1000 pages and contains text, images and tables.
View 14 Replies View RelatedThis is for Rectangle Select. I read somewhere else that it's possible but it didn't say how. I would also like to change the default for fixed ratio from 4:3 to something like 1:1 (square).
View 4 Replies View Relatedhow do you override master pages for the entire document, not just page-by-page? I have a multi-page document and want to ba able to edit type of all pages but the text areas are locked.
View 16 Replies View RelatedI do not have an Overset Error.
Â
When I export my ePub, the entire text is visible But now that I am going back to edit this document.... Change some paragraph styles, The last 25% of the text in my document is NOT VISIBLE. TRUNCATED
Someone sent me a zip drive with links to fonts used in the original document being worked on, how do I link the font from the files saved on the zipdrive?
View 7 Replies View Relatedhow the content collector works and this feature to me seems to replace the need of having a Library file or using snippets. The problem with Libary files and snippets is they use special formats, and accessing them can be problematic if you created them with earlier versions of InDesign.
Â
With content collector, I can create a library of objects with normal InDesign files, or even have several items in a single InDesign file. For example, if I created a set of arrows, I could put all these in a single InDesign file. I could then use content collector to link or copy the arrows I want from the original file.
how do i match on screen document size to view print size? when i create a new document and put in its dimensions when i press view print size it appears alot smaller on screen
View 4 Replies View RelatedWhenever I try to open a file in Photoshop CS 5 extended it says it is not the right kind of document. I've checked the file extensions which are correct. The files themselves are not corrupt as I can open them in other programs..
View 1 Replies View Related
