I am workking on a very large publication (width of 150.8") and I can't seem to work with it in Photoshop. I did most of the work in ilustrator, however, I now need to add and work with photos for this publication, and to my horror, photoshop will not allow me to open the AI file without cropping or scaling it first.
View 1 RepliesI want to re size them based on document sized in 'inches' to be set by resolution say for example: If the width or height is less than 4.72 inch the image resolution should be 150dpi; if the width or height is less than 1.33 inch the image resolution should be 300dpi; and the last one if the width or height is greater than 4.72 inch the image resolution should be 75dpi.
View 2 Replies View RelatedWe just started getting more into banner and sign printing. I have since learned that InDesign has a max size limit of 216 inches. I prefer Indesign over Illustrator but I tried with that also and that gives me a limit of 227 inches. I need to go bigger than this and it will probably be a regular problem. Is there a way to trick ID or AI to go larger?
View 7 Replies View RelatedI have in design when i open a new document it says 51p0 instead of inches.. how do i fix it ?
View 1 Replies View RelatedHow do I make it so a new document in Photoshop uses Inches as its units instead of pixels? I have it set to inches in the preferences -> units & rulers but every time I make a new document it defaults to pixels for the dimensions. way to make that default to inches?
View 1 Replies View Relatedhow do i match on screen document size to view print size? when i create a new document and put in its dimensions when i press view print size it appears alot smaller on screen
View 4 Replies View RelatedIn the Develop module, the size of my image is 4928 x 3280. How can I calculate the size of this image?Â
View 2 Replies View RelatedCan LR 4 display the image (document) size in inches? The only metadate I can locate provides this in pixels, My current solution is to open in Photoshop then to Image-Image size-document size. .
View 2 Replies View RelatedHow do you resize images to a specific size in inches in illustrator?
View 6 Replies View RelatedThis is for Rectangle Select. I read somewhere else that it's possible but it didn't say how. I would also like to change the default for fixed ratio from 4:3 to something like 1:1 (square).
View 4 Replies View RelatedI've got the Pipe Table style just as I need it except for one thing. I have all circular pipes and I would like the "size" column to display in inches rather than in feet. In the past I was able to multiply this number by 12 in the style composer but that doesn't seem to work anymore.
View 2 Replies View RelatedOut of nowhere my AutoCAD commands such as line, offset, circle, etc will only work if i type in the amount in inches. I use feet / inches when i use these commands. It says specify second point... Not sure what this means. For example I want to offset a line 15'-8". It won't let me do that. If i offset a line at 146" it lets me do it.
View 5 Replies View RelatedThe difference in document size between PS6 and Bridge 6. After the final editing, the picture (PSD) size will be say 85 MB in PS6. However, viewing the same picture in Bridge, or Windows Explorer, the size will be 150 MB.
Â
I should also mention that the pictures were passed through LR4, then on to PS.
need to create a document with this dimensions. I don't understand what the bleed size would be.
2 1/4 x 10...bleed size 3 x 10 3/4
I have a photo 36" x 24". I have cropped to 18.5 x 12.5" yet the document size remained the same. Now when I go to print on 13" x 19" paper, only a portion prints because the photo is too big. I shouldn't have to "scale" as then I have no way of confirming that it really will print to the crop dimensions.
Â
Since upgrading to CS6, I have had issues with how the crop is done. For example, why when I open a photo in CS6, the crop tool is already selected by default?
I was designing a membership card for a company and set a resolution of 300 and I can't remember what document size I set originally.
Anyway, my sizes now are as follows:
Pixel Dimensions: W 700, H 410
Document Size: 5.93cm X 3.47cm
Resolution: 300 pixels/inch
When I save my psd as any image type, my image is MUCH bigger than 5.93 x 3.47. How can I save it so that it is the size I want, but still the good image quality (resolution) and so I get the same size when I print it.
I was designing a membership card for a company and set a resolution of 300 and I can't remember what document size I set originally.
my sizes now are as follows:
Pixel Dimensions: W 700, H 410
Document Size: 5.93cm X 3.47cm
Resolution: 300 pixels/inch
When I save my psd as any image type, my image is MUCH bigger than 5.93 x 3.47. How can I save it so that it is the size I want, but still the good image quality (resolution) and so I get the same size when I print it.
I need to crop my images at 500x500 pixels for a project. I do a Save For Web & Devices and use JPEG, optimize at 80%. When I open up the new JPEG file, the pixel size says 500x500, but the document size says 6.944x6.944 inches at 72 resoultion, instead of 5x5 inches at 100 resolution. I've been doing the same process for months and it was correct in pixel and document size until recently, but I haven't changed any settings or my process.
View 6 Replies View RelatedI’m designing a DVD case cover. I’m printing it with my home printer, when I’m measuring it on the paper it larger than it specified in Photoshop. I have tried to check and uncheck the “Scale to Fit Image” but its still not accurate.
My image is : 297x210
Res : 300ppi
Why the measurement on the paper and the document size in Photoshop are not the same?
I've never had this issue before, but recently when I create a new document preset and go through the process of saving it, it simply doesn't save (File > New > Preset: Custom > Save Preset > Ok). I've tried reinstalling CS6, removing all other custom things I had (textures, brushes, etc.) but not matter what I do, I cannot for the life of me get custom new document presets to save anymore.
View 1 Replies View RelatedI'm looking for a way to resize all the layers in my document to a specific size. I'd like to resize every layer to be exactly 6 inches in height (while keeping proportions constrained). I can manually transform every layer to do this but I haven't found a way to do this automatically to all layers, I've tried to do it as an action but it's recording it as a percentage and not a fixed height, so it doesn't work on the other layers that aren't the exact same size.Â
View 12 Replies View RelatedI'm working on a large tradeshow booth design. It was suggested that if my computer can handle it, to work at scale (120 " X 90") at 150dpi. So I am.
I am nearly finished designing and now Photoshop 7 is giving me an error:
"Cannot save file...the document size exceeds 2G." Or words to that effect.
The document window tells me that the file is 970 MB, less than a Gig.
I've purged all hidden layers to reduce the overall files size. No go.
I removed the last image I had in the design, which used outer glow effect, and now the file will save.
can't print photoshop cs5 document to same size as created on 27" imac.
View 1 Replies View RelatedWhy is the pixel ratio of a project in illustrator different than that of the same pixel ratio of a project in Photoshop? Example: A project can in Illustrator can have an artboard of 950px X 950px and be 12in and in Photoshop that same pixel ratio will be 4 3/4in.
View 3 Replies View RelatedEverytime I open a document in Photoshop CS5, these 2 dialog boxes (Image Size, Script Alert) would pop up. to cancel 2 times to start editing. Is there a setting I can disable this?
View 3 Replies View RelatedElements 7 used to place my photos in a new document and there was very little resizing to do. now with elements 10 and 11, my photos are placed way larger than the document and i have alot of annoying resizing to do on every one. There must be a way to change this.
View 2 Replies View RelatedHow the animation size can be controlled in a new document in Designer Pro?
Basically I have created a custom size animation as 750 x 245 pixels, this has been exported to .swf flash file. So in the document where I would like to use it, applied the File/Import.
But somehow like this the imported object comes with 192 x 192 pixels dimension, in what the main issue is that this is a square, with big white are around the real animation which was a long rectangle. How I could import the .swf file without those white dimension?
When I go to create a new Document in Illustrator I'll select a default document type like : Mobile and Devices. Then I go down to the different sizes and bam. The problem. I can't pick a default size that "I" want to use. Yes there are preset sizes but none of them are the ones I want to use. Ok there has to be a text file or something that lets me edit/add new document sizes to illustrator. It shouldn't be this hard. I don't own CS6. I'm on an older version of Illustrator right now. I don't know if you guys fixed this in CS6. But it should be like photoshop or indesign. Why it's different baffles me.
Â
This is a JDI if there ever is one. Make all presets in all programs the same (editing wise) and if possible make a preset manager that allows for one preset to be added or edited and all apps see these presets.
I just recently re-installed CS4 onto another computer and now I can't select "Custom" in the size when creating a new document.
View 1 Replies View RelatedI created a 6.25 in wide doc in ID, exported it to PDF. PDF printed doc at 5.5 in wide. I sent PDF file to coworker, who printed it to several other printers in office: same wrong-sized results. Packaged and emailed original ID doc to our local printer, who opened my original ID file and--without making any changes to it--exported to PDF and got a perfect 6.25 size! She had no idea why it didn't convert properly on my software, since it worked perfectly for her.
Â
So, it's my software, and it's a recurring problem: I've created other PDF docs in the last few months that printed incorrectly. That's professionally embarrassing, especially since I make quite a few PDF docs for work.
When I export or publish to pdf from CorelDraw X6 the document size changes.If lets say i export an A4 page and then inport it again the size of the page has changed from 210x297 to 209,903 x 296,686 !
View 4 Replies View Related