When I open previous artwork files, to maintain or update, one of my fonts disappeared. Coreldraw does recognize the font when I open the artwork file, but within the artwork the text in this paticular font is blank. It's called Trajan Pro. All my other softwares recognize it and I can use it, except in Corel. Not sure how to get this fixed, since I never had this problem before.
View 2 RepliesOne shows my finder where the psd files are, and the other shows my desktop within the Smoke library. Only one psd file gets recognized.I tried copying them to different locations, and renaming them, but nothing worked.The ones that don't get recognized are in CMYK colorspace. Is that a problem?How else can I get the layers into Smoke? By converting it to RGB, my layers get flattened.
View 3 Replies View RelatedI was working on a project and went to change to a different font and all that was there are the last 6 or so that I used. When I go to the drop down menu It doesn't show any other fonts. I know there are a lot of fonts in the computer but cannot get them on the program.
View 7 Replies View RelatedAlign & Distribute doesn't work for Text / Fonts
View 1 Replies View RelatedI just tried to open a CorelDRAW document on my other computer where I'm obviously missing one of the document's fonts.
Problem:
The CorelDRAW font substitution dialog does not list the missing fonts:
Thus, it's impossible to install them to get the document working as expected.x.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
I have a number of fonts in my windows fonts folder thast do not appear when I am using PS CS6. I have a bunch of work done on earlier version of PS that use and even need these fonts. I cnannot update the work because the fonts do not appear in the Foints window of CS6.
View 2 Replies View RelatedI have an old version of the creative suite that is all right for what I do (information for a charitable organisation for medical research) installed in 2008. For quite a while now every once in a while when I start up I get a screen asking me to register. But since I already am registered Adobe just said to click on later and go on working. But this morning the screen is empty so I can't click anywhere. I've tried restarting and even turning off the computer and trying to restart my day.
View 2 Replies View Relatedthe mCloth modifier when applied to a plane , the plane doesn't move while playing the simulation, it doesn't move at all ! same thing with the apexcloth...
I've installed then all latest Physx software + latest cuda + Latest 3ds max Physx plugins for max 2013 ( v2.86 )
I also installed absolutely all updates for max 2013
....without success !
my Illustrator CS6 (64) denies any service since a month, but (32) is functioning perfectly .
View 3 Replies View Relatedunder Windows 7 pro and psp13.2.0.14 it don't work anymore. I even try to make it work in an old version of psp: V9.10. It still didn't work. Does any of you know something about kpt 5.1? I think it fail because of upgrades by Windows7 pro.
View 2 Replies View Relatedif the blurring of maps works ok on their system? It behaves very strangely on my system. For example Checker works fine, Noise just blurs with the Blur option, the Blur Offset does not do anything, Gradient and Gradient Ramp only blur the edges and create strange patterns, Smoke and Cellular do not respond at all, neither to the Blur nor the Blur Offset. The renderer or the coordinates source do not seem to change that. Am I missing something, could this be a bug in v2012? I do not recall this behaviour from earlier versions. According to communication center I have all updates installed.
View 3 Replies View Relatedwhen i press the command of "" to draw a line if i input 35 the line comes out to 34.925. Before it didn't do that. I'm sure i haven't made changes.
View 1 Replies View RelatedI work with lightroom 4.1. When I import my pictures on the normal way. The import will nog finish anymore. After a long time my mac give a notice that he can/copy import the images. but there is a lot of space.
View 2 Replies View RelatedI have seen this in a lot of photos especially kids photos. The picture on the right show more of what I am talking about. See the vibrant greens and blues and oranges. Obviously those are not the originally colors of that background. I am trying to figure out how this is done.
View 1 Replies View RelatedMy chrome button does not work anymore... I have Adobe Photoshop CS, every time i on sketch chrome, the window appears, i choose my settings and press ok and nothing happens!
It is not even mention in the history panel so there is nothing to undo...
Anybody have had the same problem ore know how to fix it?
In my drawing, I inserted a raster image file. I converted it into a block so I can modify it and I scaled it like this:
img_before.jpg
I saved my drawing and I close AutoCAD, but when I open AutoCAD again the image shown on the drawing file is not the same image that I had inserted previously.
img_after.jpg
The image shown is one that I had inserted before the first one but I had erased it from the file because I had to crop it in photoshop to reinsert it again.
I used the purge command to purge the block, I used the image command and i detached the image.
But the image says "unreferenced" when I do the "image command" even though it has the right location and folder. I don't know what to do anymore.
photoshop elements 12: by reinstallations the foto editor doesn't work any more, but only the organizer does. What can I do?
View 2 Replies View RelatedI have a iLogic rule for saving drawings (dwg) to a pdf file in a designated folder. Everything worked well until this Monday morning. Now I get the message: Error in rule: Save2PDF, in document: 13006-027 propflens-1.dwg Value cannot be null.
Inventor 2014 sp1 | Vault basic 2014 | HP Elitebook 8670W | win7 64b | 8Gb | GMT +1
It started about 3 or 4 weeks ago on my office workstation with Inventor 2013 Pro. Seems to still go okay at home with 2014. I'm using Inventor's built-in PDF export, not an external program.
Product Design Suite Ultimate 2013, 2014
Autodesk Inventor 2013 Certified Professional
Work: Dell Precision T1600 (Xeon E3-1280 / 16GB / 512 GB SSD / 250 GB (Internal) / 1 TB (External) / Quadro 600)
Home: i7-4770k / ASUS Z87-Pro / 16GB / 250 GB SSD / 1 TB HDD / 3 TB USB3 HDD / 2xRadeonHD 4870 in CrossfireX
Laptop: Toshiba Satellite P755-S5269 (i7-2630QM / 8 GB / 250 GB SSD / 750 GB HDD / GT540M)
I must have hit a hotkey or something because now when I drag select vector and text and copy paste inside the same document it only pastes unformated text back without any vector.
When I use create outlines on the text it copies fine but if Im just copying everythign together or only the text object I get unformated text back.
If I click on an eye symbol the symbol disappears, but not the elements on the screen like you should expect. There's also a weird behavior with the lock symbols. If I lock a layer, I can click the paths anyway. The lock symbols doesn't work anymore. The whole layers palette is useless now. I tried to remove the whole "Adobe Illustrator 17 Settings" folder, but that had no positive effect.
View 11 Replies View RelatedI have done everything I can find on the web (reloaded files, downloaded new files, you name it) and LR5 still won't let me "use" my AVI files. I can see the snippets,, they appear to be there, but I cannot play them, edit them, scrub them, export them etc. Suggestions other than to dump Lightroom (especially since the Adobe chat service is useless)?
View 1 Replies View RelatedACA12 - the mouse wheel doesn't work on many of the dropdowns anymore? Is this an 'improvement' or is there a new variable I need to learn to turn it back on.
Do autodesk have only 12 fonts on their machine? Why is the text style font name drop boxes so tiny? Makes it real time consuming to select a font when you have lots of fonts as I'd imagine most machines have.
[URL]
My measure function doesn't displays anymore the result on screen but in the command lines. What must I do to make it back to normal again?
View 2 Replies View RelatedPhotoshop CC on Mac OS X doesn't recognize printers
View 4 Replies View RelatedEVerytime I try and download ANYTHING, it goes to Photoshop (I have CS4) and says, Photoshop does not recognize this file!... what is a 'nerdy photographer gal to do'?? I have had this problem for about 6 months. I called dear old Mumbai,and of course, he told me that I would have to pay for any info! or go to Adobe support systems.
View 4 Replies View RelatedAcer Laptop
Windows Vista
3 gb ram
160 gb hd
Printer - Canon Pixma Pro 9500
Problem-
I recently installed Photoshop CS4. I still have CS3 installed. When I go to print from CS4, it prompts me that there is no printer installed on my pc. (CS3 will still print without issues). I have downloaded and installed the latest and greatest drivers for my Canon Pixma Pro 9500. I have tried recreating the Photoshop preference file and still no good on either attempted solution. I even tried unistalling CS3 - no good.
How do I "convince" Photoshop CS4 that printer software and drivers exist on my pc?
My Lightroom 3.6 doesn't recognize *.NEF files, which hasn't previously been a problem. Software is up-to-date. New Nikon 800E took the pictures.
View 5 Replies View RelatedLR 3 doesn't recognize the raw format of Nikon D7000.
View 5 Replies View RelatedFor some reason my Lightroom 3.6 no longer recognizes .RAF files from my X100s.
For some weird reason, raw files from my older X100 are recognizable.
Everything seems up to date.
Running on a Macbook Air.
After Effects 12.1 doesn't recognize my GTX 780M (latest IMAC 2013) and it's impossible to activate "Enable untested, unsupported GPU for CUDA acceleration of ray-traced 3D renderer.” I've tried to add it in the "raytracer supported cards.txt" file but nothig happened.
View 5 Replies View Related