Unable to print document on windows CS6.6..Not enough memory was available or an object was too complex. Reducing the size of this document window may work. Document was created on mac book pro CS 16.2.1.
View 3 Replies
Upgraded OS from W7 (64bit) to W8.
Using Canon Pro 9000 Mk2 printer, unable to select and print borderless prints of any size.
However, using Elements 11, there is no problem which suggest the problem is confined to LR4.3.
Have uninstalled and reinstalled the driver w/o success.
On a Mac -- CS6..All of a sudden my document windows refuse to resize. I was sent an Illustrator file by another artist and now all windows only open to the size of his window. Can't change any of them.
Tried restarting the program twice and thought I reset my preference.
When I do double click to open a file of Illustrator, the application starts with a little interface and then a dialog box that says "Not enough space for the window, increase the size of the document and try again" appears.
View 1 Replies View RelatedFor some reason file>place is greyed out in my print document. I dont know why. Im trying to import a photo. Im using CC.
View 9 Replies View RelatedHow do I select to print a document without margins?
View 3 Replies View RelatedI created a document profile and saved it in the appropriate folder:
C:UsersusernameAppDataRoamingAdobeAdobe Illustrator CS6 Settingsen_USx64New Document Profiles
I then needed to remove it, but it keeps coming back. I deleted the file (even from the recycle bin), deleted my preferences, and rebooted the machine. But when I start Illustrator, as soon as I press Ctrl + N or choose File/New, the profile automatically gets recreated in the New Document Profiles folder and shows up in the Profile drop-down list of the New File dialog.
I have a document which is sized for full bleed printing. I would also like to make PDF prints of this document, but if I simply print, then everything will be off by a little. Is there a non-destructive way to 'crop' the document back to the paper size?
View 4 Replies View RelatedI need to print a document with partial UV-spots, and cannot figure out how to make my Illustrator document ready for print!
The online print center guides me to: create a 'seperate print channel' for the specific elements in my document i want covered, with either a '5th color or a special color' set for 'over-print and 100% color'.
Using CS5 windows won't print all the graphics of the file, even to a PS printer. Some of the graphics don't print at all and some print in a reverse color.
View 5 Replies View RelatedTo print all open windows in Illustrator CS5 (or illustrator files in a folder) then close the files.
View 12 Replies View RelatedI have CS5 and began a file yesterday only to have multiple problems today when I tried to open it. First it said,
"File is not readable"
Yet when I opened it on my schools computer it was able to open. Then my other file did open but when I tried to save it it said,
"When spot colors are used with transparency,changing them to process colors outside of illustrator can generate unexpected results."
Then when I cancelled that it began to read,
"Saving to a legacy format may cause some changes to your text layout and disable some editing features when the document is read back in"
I don't really understand how I could fix this issue because obviously its the file inside. Now I did have a lot of imaged in the file that I made in photoshop where I took away the background, made it transparent then saved as a png. Is that the issue? Most of my images on the file are .png and were edited with photoshop.
I can't open a new Illustrator file. It sends me this error: Can't create a new illustration. Problems occurred while saving the print file.I opened a previous document created in CC, but it will not allow me to copy and paste items from one doc to another. I have rebooted with no avail.
View 5 Replies View RelatedI am having trouble printing to an HP Designjet T770 from AutoCad LT 2012, on a Windows 7 computer.
I am using the HPGL/2 driver. I can print a test page, and I can print from other programs.
When I try to print, it looks like it is sending it normally, but the printer just ignores it.
I am able to print to this printer from AutoCad 2010 on a Vista computer.
I'm having an issue with Autocad LT 2010 where when I xref in my title block which has our company logo in color, the logo will only print in black and white. If i open just the title block and print it, it will then print in color. I only seem to have this problem when the title block is xref'd in. I downloaded the 2012 demo version of AutoCadLT and it prints just fine?This has just started happening when my computer was upgraded to Windows 7 64 bit.
View 8 Replies View RelatedI recently upgraded to PhotoshopCS5.5 and find that I can't print on my HP Photoshop Premium printer. I'm using a MacBook Pro with Mac OSX 10.6.8. I also am unable to open 2 images at the same time.
View 3 Replies View RelatedI remember reading somewhere that two windows could be opened for the same document allowing one to be worked on while zoomed in and the 2nd would update to show the changes.
How do I open two windows of the same document?
This is a neat trick as it allows document to be worked on without continually zooming in and zooming out to see how it all looks.
I am currently using dual monitors and whenever I open or create a new document in CS2 it wants to go on top of the menu bar till I move it. This gets annoying after a while when trying to edit multiple documents. Is there a way to make the Menu bar always on top and the documents to just live in the work space below it and never go ontop of the others? I know this was possible in earlier versions of photoshop.
View 10 Replies View RelatedI get an error saying I need to install a printer ... but CS2 works fine. What do I need to do?
Windows XP, Konica Minolta C253
I keep getting this error code whenever I try to print to a PDF document from my PDF print driver. It keeps crashing the program and having me shut it down.
Unhandeled Access Violation reading 0x6c302be0 Exception at 6c302be0h
Would like to know if there is away to fix this?
I'm getting a message on a print document that I'm working that reads "Document contains an invalid frame. Story text begins - Delete frame and associated story?" Regarless of my choice, ID becomes unresponsive.
View 7 Replies View RelatedI have had this program for several years and no problems until yesterday. My computer, win7, 64 bit, did an automatic update. Now my corel draw will not run and the following error report appears.
"Unable to create a DOM document.Class not registered / Verify that MSXML4 is installed"
Can not reinstall program as the box is sitting on a shelf 800 miles away.
I am unable to open my own pdfs in my Photoshop (ones that I have created in same Photoshop).I get the message "This is not a valid Portable Document File (PDF) document. It cannot be opened."
I have to keep recreating the art...ugh!! Is there a way to pull up history to replicate my artwork until I get this resolved?
I have CoreDraw X5 installed on my computer. A friend of mine e-mailed me a CorelDraw document she created. I am un able to open it. When I try to open it, CorelDraw opens but does not display the document. So the application is open and I see all the toolbars and everything but the space where I would see the document is grey. I have received CorelDraw documents by e-mail form other friends before without any problem, so it is not the e-mail that is the issue.
View 16 Replies View RelatedI purchased Designer Pro 9 about a month ago. I have tried about 30 times, no kidding, to change the US Letter template from Arial 10 to Verdana 12. It happened again this morning and I've decided to finally come to the forum and find out what's going on.
Here's what happens: I open US Letter and make the changes, then choose Save Template. When I reopen it, it's still Arial 10. Makes no difference if I choose "Use as default template" or not. I even tried saving it as a template with a different name, Verdana 12, but it still opens as Arial 10.
As a test, I opened Designer 6, chose New, US Letter, and changed the font to Brussels 12. I then selected Save Template, saved it as Brussels 12, and closed out. Then I chose File/New/Brussels 12. It opened as a letter template with Brussels 12 point. That's the procedure I used years ago to change US Letter to Verdana 12 in Designer 6, and so the Save Template function still works in that version.
Because nothing I've tried seems to work, I am wondering whether any template I create will be saved in 9.
can't print photoshop cs5 document to same size as created on 27" imac.
View 1 Replies View RelatedIn PS CS4 Mac, I used to be able to print the full document info that appears in the title bar, including the currently selected layer/group. This would print at the top of my document and might look like:
File Name.psd 100% (layer name, RGB/8)
I always thought this was a function of selecting "Label" in the Output window of the print dialogue box. However, it does not seem to be working anymore, and now it simply prints the file name, like this:
File Name.psd
How can I turn this feature back on so that I get the entire document window? Or another method to accomplish something similar? I am printing individual layers from a single document and having them automatically "labeled" is useful.
Mac OS 10.6.8
PS CS4
Just loaded Draw Graphics Sute X5 on a secondary computer running Vista. CDR file shows up correctly in print preview, but bitmap portions of document do not print.
View 2 Replies View RelatedI have a document, where I need to have 4 different print merge fields from 4 different data sources (.txt).I can only make it work with 1 print merge field.
View 5 Replies View RelatedI have been running corel x5 for about 2 years now and all of a sudden I tried to open a new blank document and it crashed the program saying that Corel Draw has encountered a problem and needs to close??
View 3 Replies View RelatedI am unable to reset the inside margins on an existing document. Editing "Document Preset" for inside margin has no effect on the document - I can change the numbers to any value with no effect on the document. Changing gutter has no effect. I have tried setting margins in the master pages, also no effect. I can change margins by right click on an existing text frame (text frame options), but this only allows setting left or right frame margins for the whole document.
View 3 Replies View Related
