Photoshop :: Print Full Document Info That Appears In Title Bar
Sep 12, 2012
In PS CS4 Mac, I used to be able to print the full document info that appears in the title bar, including the currently selected layer/group. This would print at the top of my document and might look like:
File Name.psd 100% (layer name, RGB/8)
I always thought this was a function of selecting "Label" in the Output window of the print dialogue box. However, it does not seem to be working anymore, and now it simply prints the file name, like this:
File Name.psd
How can I turn this feature back on so that I get the entire document window? Or another method to accomplish something similar? I am printing individual layers from a single document and having them automatically "labeled" is useful.
Mac OS 10.6.8
PS CS4
View 3 Replies
ADVERTISEMENT
Apr 1, 2013
Using PS CS6, Windows 7 x64.
I was under the impression that when hovering my mouse over the document title bar, I would see a tooltip showing the full file name, including the path. This isn't happening and I'm wondering if there is a way to do this. I know I can click File > Save As, or Ctrl+Shift-S to see the full path, but hovering over the title bar would be easier. (What I am seeing now in the tool tip is the file name, % magnification and which layer I have selected. Basically, the tool tip is just showing what's in the title bar without hovering.)
View 26 Replies
View Related
Mar 14, 2013
I have a document which is sized for full bleed printing. I would also like to make PDF prints of this document, but if I simply print, then everything will be off by a little. Is there a non-destructive way to 'crop' the document back to the paper size?
View 4 Replies
View Related
May 4, 2011
I cannot see the full spectrum of my document size in print preview. I have my document setup as 8ft. X 5 ft.
But when i try to see it in print preview it only shows my document between 3 1/2 ft. to 4 1/2 ft.
View 2 Replies
View Related
Mar 9, 2011
I got a problem with my autocad architecture 2011.
View 2 Replies
View Related
Jun 17, 2012
When selecting SAVE AS in Photoshop CS5, I received a message saying that the disk is full. This is this first time I have seen this message from CS2 on. I don't understand what disk is being mentioned here. Of course I understand what disk full means, but I don't understand what disk is being discussed or refered to.
View 1 Replies
View Related
Jun 13, 2013
I don't want to appear dense but Lightroom 5 appears to be stuck in full screen (Windows 7 64 bit). The FILE, EDIT, ... drop down menus only appear after carefully hovering near the top of the screen and the minimize, full screen, and close buttons never appear. I don't want to close LR to check email, browse, or kill time while it is rendering previews.
View 1 Replies
View Related
Jan 3, 2009
I have just purchased Web Premium CS4. Photoshop CS4 Extended was included with the package and I installed and ran it. Sadly any large document I tried to open appears black and sometimes when I zoom in partly displays with random black lines through it. I have checked my system's specs and they all match up with the requirements. I am running Vista SP1 on a Dell computer. I have read all the knowledge base articles relating to this matter and have done everything they said (including disabling OpenGL, etc.)
View 4 Replies
View Related
Jul 3, 2012
while jpg file open in photoshop, its show error message "This document contains Adobe photoshop data which appears to be damaged. Continue and ignore the photoshop data?" i click ok, then only its open, why its show error message
View 3 Replies
View Related
Jul 26, 2013
When i open artistic text in the Edit Text box it appears as paragraph text., full of symbols. Is there a way to turn this off.?
View 2 Replies
View Related
Jul 23, 2012
To hide the top menu bar and use the application in full screen, you must specify this setting in the Smoke Setup utility, which is found in the Smoke 2013 folder. In the Smoke Setup utility, under the General tab, set the Menu Bar option to no. When you hide the top menu bar, certain options, exclusive to the top menu bar appear at the bottom right of the screen. You must restart Smoke after making the change for it to take effect.
why but it feels to much more like a real application again! Hadnt realised just how much I disliked menu bars until now.Now how do I create some color bars?
View 8 Replies
View Related
Dec 21, 2005
I've created a custom title block. I'd like to use VB to fill in this title block using info obtained from an Excel Spreadsheet; Company Name, Location, Drawing Title, etc.
View 5 Replies
View Related
Jul 12, 2012
Is there a way to display the projection (FL-W83) or Datum (NAD83) of a DWG file in the titleblock? Maybe using fields, or a diesel expression of some sort? I belive the information resides in the .NET framework, how can I get that into my titleblock?
HP Z400 Workstation
Intel Xeon W3550 -Cores 4
12GB Triple-Channel DDR3 @ 533MHz
2-HP LE2201w @ 1680x1050
ATI FirePro V3800 (FireGL) (HP)
MS Windows 7 64-bit
View 2 Replies
View Related
Apr 15, 2011
Our professor provided us with 3 dwg files that we are supposed to use for our title blocks on all construction documents. One is the title block file, one is a file with preloaded client info text and the other is preloaded with project info text. This includes dates(drawing, revisions, etc.), page numbers, sheet names, etc.
He explained how it's easier to xref all of these files into the paper space of our working files, but I don't understand how this is easier when every page has different information on it - in the very least a different page number and sheet/drawing name.
Is this a matter of creating a unique file for each page of our set of plans? This seems much more confusing that just inputting the text manually on each drawing.
View 2 Replies
View Related
Jun 21, 2007
I create a graphic that has the dimensions of a standard piece of paper (8.5in X 11in) and then i savedit on a disc for my friend and he goes to office max to print it out and it comes out with a border... Is there a way to get rid of the border or can printers just not print full page.
View 6 Replies
View Related
Feb 8, 2009
when I expand the document window in the client area of the user interface, the window expands completely to cover the whole screen, including the surrounding panels, menus, etc. The only thing shown is the full document window. I'm not sure if this is something that can be configured in the preferences or not. I've tried all the interface settings and nothing works.
View 1 Replies
View Related
Feb 18, 2014
When I draw an object in Illustrator, the shape appears filled in the view of the document, even though it is set to no fill in the apprearance panel. The thumbnail for the object in the layers panel shows it with no fill, and if I copy it and paste it into Photoshop it has no fill there, so it really has no fill. Just in the view of the document where I am drawing it appears with a colored fill.
I'm drawing lots of overlapping shapes, I want them with no fill so I can see the ones behind. This is happening with all the tools I have tried: pen, pencil, paintbrush, shapes, whatever. I've tried restarting Illustrator, also restarting my computer, nothing changes. I may have clicked on some setting inadvertently somewhere, as I've been exploring and clicking on lots of things to see what they do.
View 9 Replies
View Related
Feb 3, 2012
I'm having an issue with Autocad LT 2010 where when I xref in my title block which has our company logo in color, the logo will only print in black and white. If i open just the title block and print it, it will then print in color. I only seem to have this problem when the title block is xref'd in. I downloaded the 2012 demo version of AutoCadLT and it prints just fine?This has just started happening when my computer was upgraded to Windows 7 64 bit.
View 8 Replies
View Related
Mar 18, 2014
document info / object can't chane units to mm, it show inch only....WHY?!?!?!
View 2 Replies
View Related
Mar 14, 2014
Was printing 4x6" from LR 5.3 fine. To an Epson 3880. Then went to Page Settings (MAC) changed paper size to 8.5x11". The preview responded with a larger page. I scaled the image up to 8x10 via lightroom cell size. But when I printed to the Letter size paper, LR printed only a close to 4x6" top left corner. This was not a full image like the 4x6. It was just a corner.
Exported to PS and printed fine.Can not figure why the print will not print the full image?
View 1 Replies
View Related
May 9, 2012
I like to have the path display in the title bar at the top of the screen. I check the box to display it in options. It works! But the text is almost illegible in the title bar. The title bar is black, the text is black with some cloudy grey background. It is impossible to read. I can't seem to find anyplace to change it's appearance either.
View 4 Replies
View Related
May 1, 2004
I bought a new computer and got Photoshop Elements 2.0 with it. Great program. My problem is a friend said that Photoshop 6.0 is better. I asked to try this program . I loaded his program on my machine and started to print. All of a sudden my prints appear to be pinkish color and no normal colors. I looked on the web for an answer. Could this program be illegal and something is changing my colors?
View 9 Replies
View Related
Oct 17, 2012
I have created a Document using sAIDocument->New().
Later I would like to change the title of the document, which I originally passed in on the AINewDocumentPreset.docTitle.
how I can do this programatically, or do you have to remove the document and start again?
View 1 Replies
View Related
Oct 23, 2013
I need publishing a PDF from a Word document full of diagrams created with Adobe Illustrator CS6. My diagrams are all vector. I am free to export them anyway I like. My Word doc has many cross-references, footnotes and Endnote references and a large table of contents. It is a few hundred pages long, with around 50 diagrams. I would like to preserve the original quality of the vector art and the intra-document clickable links.
Each step in the process has multiple possible paths, and each path often many options. There are 3 steps:
1) Export from Illustrator to: .ai, .pdf, .eps, .wmf, .emf
optional 1b) Convert (eg. use Acrobat to convert .ai to .doc, .eps or .ps)
2) Import to Word: drap and drop, file cut and paste, insert picture, insert object, insert object linked to file, PDF Reflow (Word 2013). I tried them all.
3) Publish to PDF from Word. Many different paths...
- Print to PDF: I have AdobePDF, PDFCreator, NovaPDF printers installed
- Save as... : Save as->AdobePDF or Save as->PDF or XPS
- Plugin toolbars: Acrobat->CreatePDF, NovaPDF->Save as PDF, PDF Architect->Convert
or
- Save as .doc and convert with Adobe Acrobat.
I have tried many different permutations. There are 4 possible errors:
E1 - The diagrams are converted into bitmaps.
E2 - The diagrams are 'linearised' - curves are converted into chains of linear sections
E3 - The diagrams are corrupted - text missing, characters changed, dotted lines become solid lines etc.
E4 - Hyperlinks are lost.
Here are some results of my tests.
I see no difference so far between Word 2007 and Word 2013. Results below stand for both.There is no difference between Word->Acrobat->CreatePDF and Acrobat->Convert Word to PDF.Illustrator -> AI -> Acrobat -> Word almost works, but diagrams are corrupted in various ways (eg. dashed lines become solid).When export from Illustrator as EPS level 2, EPS level 3, EMF, WMF and PDF and get different results depending on the path to PDF:
No links preserved:
Word->Print to AdobePDF: Good: eps2, eps3, emf Bad: PDF (E1), wmf (E2)
Word->Print to PDFArchitect: Good: eps2, eps3, emf Bad: PDF (E1), wmf (E2)
Word->Print to PDFCreator: Good: eps2, eps3, emf Bad: PDF (E1), wmf (E2)
Word->Print to NovaPDF: Good: - Bad: eps2 (E2), eps3 (E2/E3), emf (E3), PDF (E1), wmf (E2)
Word->Toolbar->PDFArchitect: Simply prints with current postscript printer. One of above.
Links preserved:
Word->Save as AdobePDF: Good: - Bad: eps2 (E2), eps3 (E2/E3), emf (E3), PDF (E1), wmf (E2)
Word->Save as PDForXPS: Good: - Bad: eps2 (E2), eps3 (E2/E3), emf (E1), PDF (E1), wmf (E2)
Word->Toolbar->Acrobat: Good: - Bad: eps2 (E2), eps3 (E2/E3), emf (E3), PDF (E1), wmf (E2)
Word->Toolbar->NovaPDF: Good: - Bad: eps2 (E2), eps3 (E2/E3), emf (E3), PDF(E1)
So, only the "Word->Print to PDF" pathways provide good quality vector diagrams, but none of these preserve intra-document links.
I have:
- Adobe Creative Cloud CS6 (Illustrator, Acrobat etc. all latest versions)
- Word 2007 (latest version (SP3 12.0.6683.5002))
- Word 2013 (Office 365 latest version)
- Access to a Mac with Word 2011.
View 4 Replies
View Related
Sep 25, 2012
Everything is calibrated. That is not an issue.
When I work the photo (JPG, TIFF or PSD) to where it is what I want, the preview is darker in the print preview. Probably one f/stop in photo terms. And, THIS is how it actually prints.
What is causing that? And, is there a fix?
None of the "show paper color," etc. are checked, so that is not causing the difference.
View 6 Replies
View Related
Jul 7, 2013
I set the document.window.text="aa" what i want
However, when the state of window the window is changed the text is re over to the document full name. I also use the AcadDocument WindowChanged event,but it is not use.
View 5 Replies
View Related
Oct 27, 2009
When I save an Illustrator (CS4 and below) file that has a document title and an author in the File Info tabs only the author field is properly transferred to the metadata of a PDF when using Save As PDF. The title field of the PDF gets the file name ("map_data_2006") and not the document title ("Map of Data in 2006"). How do I keep from re-populating the PDFs with metadata (which increases the file size after a resave) which is already stored in the AI files?
View 2 Replies
View Related
Aug 23, 2005
iv'e just created a montage of photos for a portfolio project im working on and now its time to print the montage.
I need to print the page so it fills the A4 or maybe slightly have a 5ml whit border all abpund,
View 5 Replies
View Related
Sep 4, 2013
Have just purchased upgrade. When selecting Slideshow tab or impromptu slideshow and or try to print Sys info under help notice appears to say that Lighjtroom has stopped working and will close.When I revert to Lightroom 4 I have no problem with these features.I am using Windows 7 prof on PC and Windows 7 Home edition on Laptop with the same results on both. Remember I cant print Sys Info.
View 4 Replies
View Related
May 10, 2009
i have made a poster in photoshop. when i created it i selected A4 but when i print it i am loosing alot of the image all around the border especially at the bottom.
what should i do to make it print from corner to corner and everything that i had on the page?
View 1 Replies
View Related
Oct 1, 2013
I have been using Lightroom 5 for a while now and am currently printing some photos. In Lightroom 4 there used to be an info overlay that stated the current printer and paper size that was selected for that printer. I can't seem to find or display that information now in Lightroom 5. I have tried using the "I" key but to no avail.
View 2 Replies
View Related
