Have just purchased upgrade. When selecting Slideshow tab or impromptu slideshow and or try to print Sys info under help notice appears to say that Lighjtroom has stopped working and will close.When I revert to Lightroom 4 I have no problem with these features.I am using Windows 7 prof on PC and Windows 7 Home edition on Laptop with the same results on both. Remember I cant print Sys Info.
View 4 Replies
LR5 (the final one, not the beta) crashes 100% of the times I try to go to the Slideshow module. It also crashes 100% of the times I try a simple Help/SystemInfo.
I had no such problems with LR3.x and LR4.x, and my system (Win7 64bit) is otherwise perfectly stable and has all the latest patches/updates). The problem occurs even with a "clean" install of LR5 (i.e. without upgrades or migrations from LR4).
I have been using Lightroom 5 for a while now and am currently printing some photos. In Lightroom 4 there used to be an info overlay that stated the current printer and paper size that was selected for that printer. I can't seem to find or display that information now in Lightroom 5. I have tried using the "I" key but to no avail.
View 2 Replies View RelatedI have LR 5.3 on a Mac running Mavericks. The Info Overlay in the Print Module can not be found with the "I" key? I can see info in the Library.
View 4 Replies View RelatedHow do I change the default font that is used for printing "Photo Info" in the Print Module? The only option I can find is the Font Size option, but what determines the default font that Lightroom uses to print the photo info?
As far as I can tell there is no way to change the "Photo Info" color to something other than black, is this correct?
My system info of pse 7 tells me that the operating system is vista while I'm working with windows 7. It also shows a place for the catalogfile that don't exists on my computer.
View 2 Replies View RelatedInstalled 2012 Map and went to assign the projection, and nothing was available, Reinstalled, No Change...
View 2 Replies View RelatedIn PS CS4 Mac, I used to be able to print the full document info that appears in the title bar, including the currently selected layer/group. This would print at the top of my document and might look like:
File Name.psd 100% (layer name, RGB/8)
I always thought this was a function of selecting "Label" in the Output window of the print dialogue box. However, it does not seem to be working anymore, and now it simply prints the file name, like this:
File Name.psd
How can I turn this feature back on so that I get the entire document window? Or another method to accomplish something similar? I am printing individual layers from a single document and having them automatically "labeled" is useful.
Mac OS 10.6.8
PS CS4
We use an in-house plotstamp (not the acad plotstamp) which uses rtext to show the file path and name. It works fine under all circumstances EXCEPT when we plot using the Publish command. The output from Publish shows the file path as the C:Documents and Settings... where the acad2005 software is installed instead of the correct network drive path where the dwg files are located.
Is there a secret setting somewhere that will keep Publish from changing the rtext? If we switch from rtext to fields, would that eliminate the problem?
I have a question if there is some kind of plug in for Coreldraw to easy make personalized printing?
For example Kodak calls it Variable Data Print System and you can easy starts personalizing your bussiness cards.
Is there some kind of plug in aviable?
Coworker is setting up a new Win7 (64bit) machine but we don't have the ability to upgrade CAD at this time. So running AutoCAD Mechanical 2007. (Yes we know they don't always play nice) Two other workstations here are running the same OS & CAD and print without issues. This new machine AutoCAD does not see any system printers. Have made sure the "Hide System Printers" is not checked under options. I can add a plotter file for each system printer and that workaround is OK, but why this one machine can't see the system printers. They are Xerox workstations on the network - not local. We have already restarted AutoCAD and restarted the PC.
View 3 Replies View RelatedIn LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedSince updating to 4.4 I no longer get any gps info imported. Same camera's, gps equipment worked fine in 4.3. Can read info from jpeg file on cf card using Opanda so I believe this to be a LR bug? Just Dl'd 5 beta and same problem.
View 1 Replies View RelatedFor some reason, (this started just a few days ago) every once in a while when I launch LR it launches the "new user" splash screen and asks for my country, but then it knows my serial numbers and I launch successfully.
Then upon launch, all of my info is gone...settings, presets, everything unique to me...it does a tour as if I've never used it.Also, my develop presets folder is completely gone...physically gone...and all the other folders are empty.
It happened once and I started all over again with all my purchased presets and my export presets and such but after the 3rd time, I got smart and dragged the whole "user>name>appdata>roaming>adobe>lightroom" folder to another partition and backed it up.
When I have this problem, I just drag that folder back to repopulate those other folders with the info and LR launches just as if nothing happened.
I do bird photography and would like to create a smart collection that would capture for example all of the warbler / magnolia that I have captured. I'd like to have the capture date, file name, and keyword in a spreadsheet file.
View 2 Replies View RelatedI have a Metadata preset for my copyright info and eversince I created it, it has been stripping the capture infor from the image (ie Focal Length, ISO, F-Stop, etc), the preset does not delete this info from the image upon import?
View 1 Replies View RelatedIs there a way to export jpegs with some exif info (creation date and tile) which should be saved directly on the image. Like the showing of the timestamp on the picture which can be turned on on some cameras.
Reasoin is: I want to use those pics on a digital image frame and I want to show some image data as well. As there are no options in the software of the digiframe to display exifs I have to integrate them in the pictures...
if it is not possible with lightroom then probably you can tell me another way (bridge, photoshop, ...) - just not manually...
Does the current 4.?? (or 5) provide a way of including selected EXIF info as text on the image at export ?
I want to place lens and exposure info on each image as plain text. Morgrify suggested but that no longer works.
Lightroom 5 doesn't any longer show GPS info from canon 6D in imported rawfiles. This regards MacOS-version. It works in iPhoto and in Lightroom 5 for Windows 8!
View 1 Replies View RelatedDoes Lightroom show bearing info in the map module if it was recorded by a GPS and electronic compass sensor? Some GPS devices, like the Solmeta Geotagger Pro 2 records heading/bearing information to the EXIF data as well as geographic coordinates. Can lightroom display this like a slice of the map highlighted from the position of the image, in the direction the picture was taken with the proper viewing angle calculated from the focal length. I guess it would look like a pizza slice seen from above.
View 3 Replies View RelatedI use LR on a MacBook for tethered shooting on location. During the shoot I 'Pick' all of the images that I want to rework and supply to the client as I am shooting.When I get back to the office, I load all of the RAW files from the shoot into my storage array, open up LR on the big computer, and start editing.
What is missing is the information about which images I have 'Picked', so I have to go through and 'Pick' the files again.What is the best way to retain this 'Pick' info when moving between computers? Is there a way to get LR to embed this in the RAW file?
We have standard XMP files with metadata for our collections - box number, folder number, copyright, creator, etc. Is there a way to add this to Smart Preview so that it will apply it to all photos at the same time?
It would save so much time to be able to use Smart Preview and apply all the metadata and just tweak it for descriptions, than to upload the XMP files for each image.
I would like to be able to see camera profile in Loupe Info. This would support me choose between versions of a photo that have different profiles applied.
I have not been able to find any indication that this is possible in LR 4. I am still using LR 3.6.
Beyond that, it would be nice to be able to select any information to see in Loupe Info and not be restricted to the fixed list of items currently available.
Some of my imported images are definitely duplicates. The question becomes, is it the same image perhaps saved with different levels of compression and possibly a new name, or are they the exact duplicates of one another.
Is there an easy way to find this out in LR without having to look at the images some other way? Where is this type of info located?
Many of my catalog images (LR 3.6) do not show file size or pixel information for the associated image file. I suspect this is a hangover from an import of photos from Photoshop Elements which I used in the past. The problem is that when I put such an image in a slideshow or web gallery, the exported image is not properly displayed.
To get around this, I can export the image files to a hard drive directory in original format, and then re-import them into my web gallery collection. The correct file size info is then available in the catalog, and the image reproduces correctly in the exported gallery.
I know (or at least hope) this is a kludge, and there is a more straightforward method to correct the catalog. I have many photos with incomplete image information.
Is there a way to view exif info of each photo on the LR 4.2 import screen. I'd like to view Exif data before making the decision to import the capture but can't figure out how to do this. Ideally it would appear as a 'tooltip' when hovering over the image in gridview, or, when looking at a single image it using the "I" key should display image info like it does in other modules of LR4. Are there any plugins that could do that?
View 3 Replies View RelatedWhy can’t I find the color profile info in the library ? It’s sometimes necessary to convert to sRGB for some applications ( internet, some beamers in clubs,…). I convert them but afterwards it is nice to have the possibility to check this out and should be possible in lightroom, the info is present why not showing it ( it is not so easy to go in finder and look at it in info for every image)? Since I’m always working in Adobe profile for printing and so this is important to know !
View 10 Replies View Relatedis there a way to do this. darkening filename info in grid mode?
View 4 Replies View RelatedI just imported several photos into my catalog using a preset metadata import. After Import I edited all the photos and then was set to export. Unfortunately it was the wrong metadata preset and I want to change it on all my photos. Is there a way that I havent been able to find yet that would allow me to easily change over the metadata copyright info on all the photos without having to start all over again?
View 2 Replies View RelatedI've just started using LR5 and the book I'm using to learn shows sliders in the White Balance section but I've got buttons with no information about temperature. How do I make the change to that configuration?
View 4 Replies View RelatedAs I review photos clicking on their thumbnails in the book module's film strip on the bottom of the screen I can't seem to find a way to have (1) the name of the photo file displayed and (2) the name of folder where the photo file resides.
In Bridge one has the option to have up to 4 lines of customer-selected information displayed below each thumbnail.
Is there a way do do something similar in Lightroom 4.1 ? How can I view the file name and the name of the folder where it resides as I select the image in the film strip ?
