i have made a poster in photoshop. when i created it i selected A4 but when i print it i am loosing alot of the image all around the border especially at the bottom.
what should i do to make it print from corner to corner and everything that i had on the page?
Was printing 4x6" from LR 5.3 fine. To an Epson 3880. Then went to Page Settings (MAC) changed paper size to 8.5x11". The preview responded with a larger page. I scaled the image up to 8x10 via lightroom cell size. But when I printed to the Letter size paper, LR printed only a close to 4x6" top left corner. This was not a full image like the 4x6. It was just a corner.
Exported to PS and printed fine.Can not figure why the print will not print the full image?
I have created city/landscape artwork using photoshop line and box tools. If you go to URL... then click on the link that says (click here to view Gotham City) you will see one of the images I am talking about. Can this image be made to look the same in vector.
View 7 Replies View RelatedI earned a free 8 by 8 photobook with shutterfly. I tried making one on their website but I could not find any that I liked. I would like to professionally print my photobook I already made with adobe photoshop 7. I need step by step instructions how to put my photobook made with adobe onto shutterfly. I would also like to know some websites that will print pre-made adobe photoshop books for cheap in case shutterfly does not work.
View 1 Replies View RelatedSometimes, the edits made in LR 3 are not applied when I print. They also do not show correctly if I choose them as the desktop background accuratly (afterexporting it as a jpg file).The photo is colorful but my desktop is not!I've exported a number of files and then printed them through windows. Some print fine and some don't.
View 3 Replies View Relatediv'e just created a montage of photos for a portfolio project im working on and now its time to print the montage.
I need to print the page so it fills the A4 or maybe slightly have a 5ml whit border all abpund,
I'm trying to print drawings made in autocad that were modified in illustrator, when I go to print the file ends up stoping halfway through the page. This is infrequent, some times files work and sometimes they don't, aswell often times when files don't print correctly, the title blog will appear at the end of the page.
Specs: Windows 7 64Illustrator CS
Printer:
Xerox Work centre 7556
How do you add text onto photo collage made in print module on LR 4? Been trying to use the Identity plate
View 2 Replies View RelatedIn PS CS4 Mac, I used to be able to print the full document info that appears in the title bar, including the currently selected layer/group. This would print at the top of my document and might look like:
File Name.psd 100% (layer name, RGB/8)
I always thought this was a function of selecting "Label" in the Output window of the print dialogue box. However, it does not seem to be working anymore, and now it simply prints the file name, like this:
File Name.psd
How can I turn this feature back on so that I get the entire document window? Or another method to accomplish something similar? I am printing individual layers from a single document and having them automatically "labeled" is useful.
Mac OS 10.6.8
PS CS4
I'm using pse10 on a computer with an i7 processor with 12GB of ram and windows 7 with a color laser printer. The print function works fine while in organizer and sharing mode, but not from full edit. When I try to print from full edit, I get an error message with a red "X" on it that says: "Before you can perform printer related tasks such as page setup or printing a document, you need to install a printer." I can't figure it out. The printer is in "ready" state, and works fine in the organizer mode, and in share.
View 2 Replies View RelatedMy epson R1900 printer will not print the color green- all inks are full
View 3 Replies View Relatedhow was this image made to look like a cartoon?
what effects went into making this picture.
am trying to create one image made up of several jpgs side by side.
What can I do to make the jpgs blend in together to make it look like one image rather than 4 images sitting there in a row.
Is there a way of examining a JPEG image that has been 'through' PS and seeing which PS filters/adjustments have been made to it?
View 9 Replies View RelatedWondering how to best format prints for printer to avoid visible edge loss in printing. I have color borders on the photos, H & V.Do I subtract a 1/4th inch from each side while formatting? Order with "border" and cut the border?
Prints will be mounted on standzard 16 x20 backboard.
I have a document which is sized for full bleed printing. I would also like to make PDF prints of this document, but if I simply print, then everything will be off by a little. Is there a non-destructive way to 'crop' the document back to the paper size?
View 4 Replies View RelatedPhotoshop elements 10 will enable me to create Montages or mosaics ie 1 Image made up from many others.
View 4 Replies View RelatedIs it possible to designate a full bleed print or a smaller bottom margin than .56in in the print module. How?
View 4 Replies View RelatedI think that is it name were you can put the image in to the text, bevel and embos so the text looks like a water mark made up from the image. can this be done in elements 11
View 8 Replies View RelatedI've been trying to print full bleed images to 3880 epson printer from LR 4.1 and for some reason won't let me make 8.5 x11 borderless prints to printer. both the left and right side of image has white borders and top and bottom has none.
both page grids sides go as low as 1 and cell size reads properly of 11.00in x 8.50in. but when you look at image in print mode in LR- it shows white borders on both sides of picture.
been on phone for 3 hrs with adobe and 30 min with epson tech to no avail?
I have created a slide show in Image Ready and it functions correctly. Except.....when I put it on my web page in either Photoshop or Dreamweaver it doesn't work.
I have Photoshop CS2.
when I set black point using windows, the image switches between blank and full image, why?
View 4 Replies View RelatedI cannot see the full spectrum of my document size in print preview. I have my document setup as 8ft. X 5 ft.
But when i try to see it in print preview it only shows my document between 3 1/2 ft. to 4 1/2 ft.
I am trying to make an image from using words- I have an image and I want to make it using just words.....so it's an image of an object but made with words (think of a photo mosaic, but with words.) I am not sure how to do this. I searched online, but all I was able to find were tutes on adding text to an image. What I want is the image to be made out of text.
View 5 Replies View RelatedHow do I make an image, that is made up of objects, a single object so I can blend it.This is my image and I need to blend the whole thing into another object. How do I do that?
View 1 Replies View RelatedI'm having problems printing (to an Epson 3800) on 17x25 paper (the image is 16x24 @ 240dpi). The image is not printing the full width of that it should. The odd thing is that it fills a different width every time I try to print it. I have tried multiple images and the same thing happens, so I do NOT think it is something specific to the image.
I suspect it is a problem with my printer. But after spending almost 45 minutes on the phone with Epson, they claim is must be a problem with PS (I'm using CS5 [12.0.4] on Windows Vista 64-bit, SP 2 machine). Epson support had me save the image as a JPG and print it from Windows native print util (and not PS), borderless on 17x25 paper and the printer was able to print the full width of the paper..I think it could still be a problem with their printer driver (and not a problem with the print head physically not being able to move that wide).
I've printed hundreds of prints this size with this version of CS5 on this exact same machine and printer and never had a problem bef.The "native" dimensions of the image are 2336 x 3504. I have resized it to 3864 x 5796 (which is 16.1 x 24.15 inches @ 240dpi). The first time I printed it (where this problem occurred), it printed about 12 inches wide; the 2nd time about 11 inches, the 3rd time about 13 inches. Note: the image is NOT being scaled, it is printing at full size but it just being cut off.
The weird thing is that if I size it to any of the other 4 sizes I regularly print at everything is fine (5 x 7.5 on 5.67 x 8.33 paper; 8 x 12 on 8.5 x 12.5 paper, 10 x 15 on 11 x 17 paper and 12 x 18 on 13 x 19 paper).
But the experiment the Epson tech had me do shows that the print head is not "blocked". Thus, I can only think that there is either: a) CS5 is someone putting an incorrect "bounding box" in bit stream it is sending to the printer or b) there is a problem with the Epson print driver in that it is interpreting the "bounding box" of the image incorrectly (but only when sized at 3864 x 5796)..I tried Adobe's Chat support and got nowhere and the hold time for phone support is over 2 hours..
i want to make a image which made of only dots no line only dots. how i make that kind of image..
View 5 Replies View RelatedHow do you get back to your original image after you have made adjustments, closed Lightroom, made more adjustments, closed Lightroom etc?
View 4 Replies View RelatedIn CS6, full screen mode, the image keeps moving up, down or to the side if my cursor gets too close to the edge of the screen. sometimes I'm not even at the edge of the screen but in the middle of the screen, I move the cursor right, the document goes to the left. In the old days the window stayed put unless you used the handtool to move it around. Is it possible to go back to this mode?
View 2 Replies View RelatedFor some unknown reason when I try to open an image file using PSE9 the image opens at 1% resolution instead of full screen. I have to manually enlarge the file to 100% and then enlarge it's window as well. I've already tried re-installing the software but the problem persists. Using Mac OS10.6.8
View 6 Replies View RelatedI have to upload pictures to Etsy to sell my prints. When I upload pictures I don't get the full image. I set it RGB (required) 3MB.
View 1 Replies View Related
