Photoshop :: Larger Document Appears Black And...
Jan 3, 2009
I have just purchased Web Premium CS4. Photoshop CS4 Extended was included with the package and I installed and ran it. Sadly any large document I tried to open appears black and sometimes when I zoom in partly displays with random black lines through it. I have checked my system's specs and they all match up with the requirements. I am running Vista SP1 on a Dell computer. I have read all the knowledge base articles relating to this matter and have done everything they said (including disabling OpenGL, etc.)
View 4 Replies
ADVERTISEMENT
Jun 13, 2013
I created a logo which was 1.8cm sq & used the chrome filter on it.
I now need to make a much larger version of the logo & after creating all theother parts of my logo ok, the Chrome filter gives completly the wrong effect?
View 4 Replies
View Related
Jan 29, 2013
I've never found a solution. I spent a half hour googling the issue - and got nowhere.
If I open a ps file that's big, copy the content, and paste it into a smaller document, I have to do a Command-0, to be able to view the whole image with handles on the pasted content, then manually pull a corner with shift held down until it's close to the size to fit, then manually size the whole thing back up to 100%. Craziness.
Why can't I paste content into another doc, have the transform handles be there, with the clipboard content sized within the window?
This is NOT a problem with Placing stuff from Illustrator This has nothing to do with resolutions
This is simply a request to find a way to paste something big, into something smaller, without having to zoom out until I can see the transform handles.
View 2 Replies
View Related
Oct 30, 2013
I upgraded from PSE 10 to PSE 12 this week and am confused about a change in behavior.
I create a large blank document (3600x3600 pixels, scrapbook size) and then drag other items onto it to create new layers.
In PSE10, the items I dragged in kept their original size. In PSE 12, they get resized to match the size of the document I'm dragging them on to.Is there a setting I need to change? Can't find it.
View 5 Replies
View Related
Dec 8, 2012
I have an image that is 15000 x 10000 pixels, 529cm x 374cm. It has been created at 72 pixels/inch.I want to print it out at 100cm x 70cm at 300pixels/ inch.can the larger 72ppi document be 'shrunk' to accomodate for the 300ppi print requirement?
View 3 Replies
View Related
Jul 3, 2012
while jpg file open in photoshop, its show error message "This document contains Adobe photoshop data which appears to be damaged. Continue and ignore the photoshop data?" i click ok, then only its open, why its show error message
View 3 Replies
View Related
Sep 12, 2012
In PS CS4 Mac, I used to be able to print the full document info that appears in the title bar, including the currently selected layer/group. This would print at the top of my document and might look like:
File Name.psd 100% (layer name, RGB/8)
I always thought this was a function of selecting "Label" in the Output window of the print dialogue box. However, it does not seem to be working anymore, and now it simply prints the file name, like this:
File Name.psd
How can I turn this feature back on so that I get the entire document window? Or another method to accomplish something similar? I am printing individual layers from a single document and having them automatically "labeled" is useful.
Mac OS 10.6.8
PS CS4
View 3 Replies
View Related
Dec 6, 2012
I would like to insert the group of faces below into a larger image with a black background. I would like to give the impression that they are underwater and we are looking down on them through the water. (Imagine a setting where we are standing beside a stream and looking down into the stream, where we see the faces.) I find several tutorials for creating underwater scenes in which the camera position is underwater, but none in which the camera position is above and looking down into the water.
CS5 on a Mac.
View 2 Replies
View Related
Feb 24, 2013
I've recently picked up Photoshop CS6 and i'm having a weird problem regarding the color cyan.
Whenever i use this color it appears as black.
How do i get this fixed??? im clueless
EDIT: When i drag the window im working in around the colors appears as normal but as soon as i let the window go, the cyan turns black again.
View 9 Replies
View Related
Nov 7, 2012
I am using OS X 10.8.2, ATI Radeon 4670, CS6 Extended 13.0.1 When I select and place the red eye tool over the eye and click, the black dot appears on the lip or off to the right. Is there some setting I need to make? It has always worked correctly in the past.
View 2 Replies
View Related
Feb 17, 2009
My preferences are set up to display the layers transparency as grid size medium and grid colour light but when I use a layer the background is always solid black rather than the chequered design it is set up to be. I have tried altering the preferences, I have tried re-installing CS4 but nothing seems to make any difference.
View 5 Replies
View Related
Feb 18, 2014
When I draw an object in Illustrator, the shape appears filled in the view of the document, even though it is set to no fill in the apprearance panel. The thumbnail for the object in the layers panel shows it with no fill, and if I copy it and paste it into Photoshop it has no fill there, so it really has no fill. Just in the view of the document where I am drawing it appears with a colored fill.
I'm drawing lots of overlapping shapes, I want them with no fill so I can see the ones behind. This is happening with all the tools I have tried: pen, pencil, paintbrush, shapes, whatever. I've tried restarting Illustrator, also restarting my computer, nothing changes. I may have clicked on some setting inadvertently somewhere, as I've been exploring and clicking on lots of things to see what they do.
View 9 Replies
View Related
Sep 24, 2013
I am editing some artwork in PS. I use quick keys to go between: b,e,g...(brush, erase, paintbucket). As I move through the image I zoom in and out with key strokes. I haven't figured out just what combination brings up a compass, but when it appears my canvas (not the image, but the whole canvas) kants to one side or another. If I see it in time I mess with it to get it back, but as I don't know what it is called I'm having a terrible time looking up how to control it and set it back to square. It seems like all the layers are okay within the image, so nothing is out of registration, but I don't know what is happening.
Any tool that is activated? Then I can figure out when to use it for real and how to undo it when I don't want it. I'm on a Mac Book Pro using Master Collection 6 and the touch pad. It seems like my finger motions might be triggering it. I have tried to step back, but it wasn't an option. Undo didn't do anything.
View 1 Replies
View Related
Dec 5, 2012
I couldn't use the crop tool: when I want to crop any area, the big black-colored area occurs and preventing me to see what I want to crop... Before, with my Photoshop, I didn't have a such trouble, I attached a print-screen and it explains more accurate.
View 9 Replies
View Related
Sep 1, 2013
Im using Adobe Photoshop CC. Everytime I click Liquify a black screen appears instead of the image.I'm using Dell Inspiron 5520.
View 1 Replies
View Related
May 2, 2013
I have an issue with a file when I plot only. The black 'mask' appears only after plotting. It does not show up in print preview.
There are no frozen layers or switched off through viewports. When I open the viewport on a new paperspace page it follows me in. I can only assume there is an underlying mask in model space or paperspace.
View 2 Replies
View Related
Jul 5, 2013
I am creating a peice of artwork in illustrator. I have cut out the icecream image in photoshop and placed it in illustrator as a psd file. It looks fine in illustrator, looks like it should do. The problem occurs when I export to pdf, a black border around the ice cream image appears. However when I print the black border does not display. So the issue with the black border only appears on the pdf. Check out the attachment beow for example of what I mean.
View 5 Replies
View Related
Jul 20, 2012
I'm working on an exploded presentation file and have finished all of the tweaks for each piece. One day, when I opened it up to do some work, there appeared a duplicate assembly model floating in the middle of my work space. The duplicate does not appear in the model browser and is completely Black. It dissapeared a few days later, but the next day, when I opened the file, it was there again.
View 9 Replies
View Related
Dec 3, 2013
I am designing a calendar. When designing the background is a solid black, but when I export or save as PNG it appears on the screen as dark grey. I'm self taught and don't know if it will print out grey or black.
View 3 Replies
View Related
Jun 15, 2011
I have created Table styles for Structures in Autocad 2009 Civil 3D, but now I have Autocad Civil 3D 2011 and the Table Style Fill appears black in paper space.
View 2 Replies
View Related
Jul 19, 2013
So this started happening a mere hours ago. I get these black scratches on every new document I make.
So At the top there is some weird black stuff. Any thoughts on why this keep . happening?
P.S. I have Photoshop CS6
View 4 Replies
View Related
Aug 28, 2012
New to CDR X6 just having upgraded from CDR 8.
Printing a black and white layout to my HP LaserJet 4000 produces an image that appears to be grayscale instead of solid black. In other words, my text, line border I've put around the layout and graphics (for the most part), all appear about 70-80% black instead of SOLID black. Small text doesn't appear to be nearly as sharp because it looks like a halftone instead solid black. On one layout I just printed, the entire thing appears halftoned except for one vector graphic that did print in solid black. Strange. I figured I have something set incorrectly in the software or printer. Has to be the CDR X6 software though because all other programs output just fine.
View 5 Replies
View Related
Feb 12, 2013
I purchased an update for PSCS6 disc. Whenever I use a slider in editing (such as adjusting hue, contrast, etc.) the background on my screen flashes back and forth between black and grey/checkerboard! It does this as I slide the slider in all adjustments! It is impossible to edit with this flashing! I have set the background to black, but it will not stay there. I have downloaded all the current drivers for my computer. Nothing works!
View 3 Replies
View Related
Nov 14, 2013
My company bought the photoshop CC for my work and my notebook, where the photoshop was installed, have Windows 8. The problem is: when I go to move some element in the document (Ctrl+T), make a selection or move the document (Space+Click) the screen flashes black, and sometimes it turns black and don't go back until I move the document.
when I'm going to move a layer to some part of the document the screen keeps flashing black until I finish it.The difference is, in the Windows 7 it doesn't happen at all, the photoshop runs beautifully. It just happens in Windows 8.
Notebook specs:
Windows 8
Intel I5 3230M
6gb RAM
500GB HD
View 1 Replies
View Related
Aug 16, 2012
Everytime I open a new file or old document my screen is black. There is no paper space, nothing.
View 5 Replies
View Related
Jan 10, 2013
I am a Graphic Designer for a print shop and we just had a large document printed that looked to be in black and white but must have been in color somewhere (gray boxes) and used more clicks on the printer than we wanted. I'm wondering if there is a quick way to check a document like this in CS5 programs to see if it is truly in black and white or if there is something in there that is RGB or CMYK.
View 7 Replies
View Related
Jul 28, 2013
my colred photos turn black and white whenim opeing a new document in photoshop.'
View 2 Replies
View Related
Oct 4, 2012
I have tried to use Steve Pattersons color grid design tutorial to place a grid over a photo. When I drag my color photo into the new document it turns black & white. What I can try to keep this from occurring? I am using CS6 with Windows 7.
View 5 Replies
View Related
Jan 2, 2013
whenever i open a document using the magic wand tool the picture in the document keeps flashing black - CS6
View 4 Replies
View Related
Mar 9, 2012
i have a simple block of text on a PS doc that is supposed to be black (i've checked many times and it's color =000000) but it looks gray on screen and prints gray. i checked opacity. it's 100%. i tried opening a new PS doc to see if somehow the doc itself was messed up, but i have the same problem in a brand new doc. make sure it wasn't a printer issue, i printed some text in MS Word and it got black just fine.
View 18 Replies
View Related
Jun 25, 2013
Computer is Windows 7 x64 running adobe CS6. The printer is a HP laserjet 3800dn the driver for the printer is PCL5 but it does the same thing printing with the Postscript driver. We have a navy blue color that prints out black for some reason. In the print options right before releasing the job we changed the use Illustrator colors to use Post script colors and it still does the same thing....Prints black where blue is supposed to go on the document. Doesn't matter if it is a .jpeg or plain text. Sending the job to a different printer works which is a Xerox work centre.
View 8 Replies
View Related
