I have created Table styles for Structures in Autocad 2009 Civil 3D, but now I have Autocad Civil 3D 2011 and the Table Style Fill appears black in paper space.
View 2 Repliesis it possible to fill enclosed polyline in plot style table editor? i prefer different modification for viewports.
View 8 Replies View RelatedI just finished installing AutoCAD C3D 2013. And my drawings and designs were done on C3D 2011 AutoCAD, but the problem now is when i open my drawings with C3d 2013 all the text that has background in it shows black in a paper space but on model space is owk, is there a way of resolving this without goiung through all the text settings.
View 9 Replies View RelatedHow do I generate a table that shows cut and fill quantities for comparing two surfaces similar to that what shows up in the panorama window. I am not working on a road project with an alignment.
View 1 Replies View RelatedI have set up a table style to display the type of structure, top of casting, and invert in and out elevations. I have also added a column to display the depth (rim to sump height). When the structure is a headwall, no depth is needed; however, the table displays this data as "???". Is there a way to only show depths greater than zero within the table editor for rim to sump height?
View 2 Replies View RelatedHow to calculate in a table the volume of cut and fill between the stations, The horizontal and vertical alignments are generated along with their sections. I’m wondering if there is a tool that summarize the volume of cut and fill between the stations in a table.
View 3 Replies View RelatedI'm trying to attach a daylight subassembly that follows my DOT chart below. Is there one that does all of this or do I need to use a condtionalcutorfill and "something else" to do it? If the case, what subassembly would I use for the "something else"? If it's cut, the table below also determines the backslope... forming a ditch. How is the clear zone factored in? I need it to go the the flowline of the ditch when it's in cut. I have a design speed of 40mph, ADT of 7000+.
View 1 Replies View RelatedWhen creating a Parcel Line Table, C3D will not select tags by style or window. Only direct pick. I have a fresh install with no other bugs. [URL]...
View 3 Replies View Relatedhow to change the style of the tick symbol for the cut/fill labels? In the attached you can see its a good size circle and I want to change it to just a small cross. I dont see that setting in the label style anywhere.
View 2 Replies View RelatedI am looking for a way to change the text style used by a table style with Visual LISP. So far I have been able to get the IAcadTableStyle object from the acad_tablestyle dictionary, but there is no property for text style. Is this even possible? Code and results are below.
(defun DumpTableStyles ()
(setq dict (vla-get-dictionaries (vla-get-activedocument(vlax-get-acad-object))))
(setq TableStyles (vla-item dict "acad_tablestyle"))
(vlax-for TableStyle TableStyles
(vlax-dump-object TableStyle)
)
)
[Code]....
There is a font and table style called "Legend" that is automatically generating and can not be purged.
I have looked through all the start up files, all the lisp files and can't find anything that would be creating them!
They appear in any file I open, new or old and even if I open a template file.
I have attached a file that should be empty but you will (or should) see both a font and table style called "Legend".
(FYI I am running AutoCAD Civil 3D 2010 as AutoCAD 2010)
I have an issue with a file when I plot only. The black 'mask' appears only after plotting. It does not show up in print preview.
There are no frozen layers or switched off through viewports. When I open the viewport on a new paperspace page it follows me in. I can only assume there is an underlying mask in model space or paperspace.
I'm working on an exploded presentation file and have finished all of the tweaks for each piece. One day, when I opened it up to do some work, there appeared a duplicate assembly model floating in the middle of my work space. The duplicate does not appear in the model browser and is completely Black. It dissapeared a few days later, but the next day, when I opened the file, it was there again.
View 9 Replies View RelatedIs there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
Let's say I have a rectangle and I want to fill a table inside of it.
The below is the code snippet I wrote.....
Table tb = new Table();tb.NumColumns = 5;tb.NumRows = 40;tb.SetRowHeight(C_height / 40);tb.SetColumnWidth(C_width / 5);tb.Position = new Point3d(ext.MaxPoint.X, total_MaxPoint.Y, 0);tb.Width = C_width;tb.Height = C_height;tb.SetTextHeight(C_height / 40, (int)RowType.DataRow);tb.HorizontalCellMargin = 0;tb.VerticalCellMargin = 0;btr.AppendEntity(tb);tr.AddNewlyCreatedDBObject(tb, true);
Where C_width and C_height are the width and height of the rectangle respectively.
Then, I got the following
The red line is the specified rectangle. It seems like SetRowHeight and SetColumnWidth are not working.
FYI, the rectangle size is around width = 3.5m height = 5m.
How do you set the text style for cells in a table? I used to be able to set the title row, head row and data row text style in vba. In vb.net I tried using <tablestyle>.SetTextStyle but it is asking me for an ID.
View 6 Replies View RelatedI want to know if you can link AutoCad tables to other Autocad tables on different layouts. Say I have ten sheets, each with a table for quantities of pipe length, and one sheet with a total of all quantities. Can I link cells from each separate layout sheet to the main table sheet, so that I can add them all for project totals?
View 3 Replies View RelatedIs there a way to search for a text style in a civil style? I have a text style that our company is trying to get rid of and I would very much like to not have to go through our 72 company styles.
AutoCAD Civil 3D 2014
HP Z620 Workstation 64-bit
Duel Intel Xeon E5-2620 @ 2.00 GHz
Ram: 48 GB
How do you download the new plot sytles from your page set-up? Where to get it from your autocad file samples or set ups?
View 2 Replies View RelatedI've the same problem: in autocad Architecture 2011, in "plot style table", there is no "monochrome.ctb". Just mentioned "none" and "new"; How I can put in monochrome into the plot style table?
View 6 Replies View RelatedIt does trouble me especially during setting "drop shadow", "inner glow" and "stroke". In previous version, if this problem came up, I can solve it by clicking another layer and then double-clicking the original layer to pop up the style setting.
View 3 Replies View Relatedknow of a way to automatically alternate a background fill color for every other row on a table (gray, white, gray, white, etc.)? I can set up the fill color manually for each row, but if I delete or add a row, I have to manually redo the alternating fill color.
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
We own Civil 3d 2010 and are using the Map workspaces.
It seems Map is hard-coded to use the table style 'Legend' when inserting a legend table, yet you can modify the table style of the legend table after it has been inserted.
Is there a way to change the default table style from 'Legend' to something else?
Here's my problem: I have a customized plot style table "SK.ctb". I have it saved both in the appropriate folders on my computer and in a shared folder on the network. Usually when I am working in a file and open the plot window, my plot table is available in the list at the upper right "Plot style table (pen assignments)".
Right now I am working in a drawing that was sent to me by another firm. They of course didn't send me their pen assignment tables, not that I really care as I would rather edit the layer colors if necessary, but use my own. The problem is that in the plot window it is only showing their plot styles - none of mine! Theirs are all listed as missing, but I can't get it to even look for the plot tables I usually use.
In ACA2008 there seems to be a maximum of 10 Cell Styles allowed in a Table Style? When I try to make a new 11th style, one of the existing 10 styles gets supplanted by the new style.
View 3 Replies View RelatedI am looking for assitance with the VB code to change the text style within a custom table when it is created from a VB standalone program. I am using Inventor 2013 and VB 2010 Express.
I have a customtable that is created within a .idw, and I would like to have the data cells set to "Table_Cells" style that I have created. I cannot find anything in the help file with a sample code to build off.
I figure it's got to be something with oCustomTable.DataTextStyle but beyond that I am lost.This is what I have, and VB is kicking it back in my face.
Dim oTextStyle As TextStyleoTextStyle = oCustomTable.DataTextStyle.StyleType("Table_Cells")
Error 2 'Public ReadOnly Property StyleType As Inventor.StyleTypeEnum' has no parameters and its return type cannot be indexed.
how to create a new Table Style definition.
I don't want to create a table on a sheet, I want to define a new style and then assign the style to the existing table.
I have no problem assigning the style once it is defined in the drawing to the existing table.
Dim oTableStyle As Inventor.TableStyle oTableStyle = oDrawingDoc.StylesManager.TableStyles("BOM") Dim oTable As Inventor.CustomTable oTable = oSheet.CustomTables.Item(1) oTable.Style = oTableStyle
There doesn't seem to be a TableStyles collection with an add or create event. I stumbled upon the "TableFormat" object but that seems to only override an existing style.
looked at the "StylesManager" but again I am not finding a create method.
Using Civil 3D release 2102 on a 64bit Win7 capable Dell Precision, everything up to date.
I have a table created from a datalink using TABLE command. I want to have it use a fill color of 255 in order to mask the objects behind it. I cannot seem to modify the table style, and using fill in Excel doesn't seem to the affect Autocad table.
As you know, when I create a table from a datalink I am not allowed to choose which style.
I don't like using wipeouts to provide a background mask, because they never seem to work when plotting from paper space.
How I can apply fill to the table, or otherwise mask the pbjects behind the table?
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
Is there a way to delete a Table style? I opened the Table Style dialogue box, selected a style and right clicked. There is a choice to delete but it is not selectable, it is dimmed.
View 9 Replies View RelatedI've edited the plot style table in the past to do things such as change yellow to print black. I've also successfully used it to select monochrome to print B&W. Currently it's not working. I can select a different plot style, apply it and see it look correct in paperspace. However, when I preview or print it, I still get yellow, printing yellow or if I try monochrome, it will still print in color.
I make sure to click apply to layout and I've also tried restarting ACAD and neither seems to work. I've also tried using the page setup manager and it still prints differently than what I select. Is there some other variable I can turn on or off that I am not aware of?
Is it possible to copy a line in Plot Style Table, in my case red nr 1, and have two with different linetype?
I have a drawing where this specific line and the text belonging to it should be in red, (line 1) and the lines dashed. If I in my Plot Style Table make line 1 dashed, the text get dashed too.
At the moment I have put another color to the dashed lines, but if there is a way to have two red nr1 lines with different linetype .