AutoCAD Civil 3D :: Which Subassembly Works Best For Using A DOT Cut Fill Table (2012)
Apr 12, 2012
I'm trying to attach a daylight subassembly that follows my DOT chart below. Is there one that does all of this or do I need to use a condtionalcutorfill and "something else" to do it? If the case, what subassembly would I use for the "something else"? If it's cut, the table below also determines the backslope... forming a ditch. How is the clear zone factored in? I need it to go the the flowline of the ditch when it's in cut. I have a design speed of 40mph, ADT of 7000+.
View 1 Replies
ADVERTISEMENT
Aug 19, 2009
C3D 2009 - We are grading on a hillside, and need to prioritize our conditional fill situations. First fill at 2:1, if not then build wall and daylight @ 2:1, if not then build full height wall. However the sections are showing all three options where they are applicable. I want it to only show the "best" or "first" solution.
View 9 Replies
View Related
Feb 2, 2013
I am trying to create a custom subassembly using SAC 2012 that will place a 1' deep ditch at the bottom of the slope in a fill condition. The trouble I am having is how to hold a consant 1' depth on the backslope and vary the foreslope since the daylight offset and elevation is variable depending on the slope of the existing ground. I need the attachment point to be the edge of the shoulder so it seems like a loop that varies the foreslope length would be required but loops are not allowed. I will also have the option to target a profile but I also need the ability to hold a constant ditch depth.
How to model this condition.
View 9 Replies
View Related
Aug 22, 2013
I am trying to apply the stripping pavement subassembly to only fill situation and even though my attachment point is only the fill case it applies it to both as shown. I am trying to get this information to provide a stripping volume for fill cases only.
View 4 Replies
View Related
Feb 18, 2013
How to open subassembly designed in SAC 2013 in the SAC 2012 ?
Civil 3D 2012, SAC
16 GB Ram 64 Bit Win7
View 1 Replies
View Related
Mar 23, 2012
We are currently using 2012 Civil 3D, and we have a issue with a drawing that not all the Pipes from the pipe network are displaying in the Profile, and even the pipe properties display box the lengths show up way too long and the stationing does not display correctly in this pipe properties box either.
The Big Twist is that we have 2 machines in the offices that will display the drawing correctly, in profile view and pipe properties display box has correct lengths and stationing. So we know it is not styles, etc.
Direct support has suggested we un-install all Autodesk products and reinstall them all again, we tried the repair, however this did not work. Any other way before we have to go through all this work, as we are looking a huge amount of downtime, and we do not think this is the issue. Perhaps a Civil 3D variable or Autocad variable is different?
View 6 Replies
View Related
Oct 31, 2012
How do I generate a table that shows cut and fill quantities for comparing two surfaces similar to that what shows up in the panorama window. I am not working on a road project with an alignment.
View 1 Replies
View Related
Sep 18, 2012
How to calculate in a table the volume of cut and fill between the stations, The horizontal and vertical alignments are generated along with their sections. I’m wondering if there is a tool that summarize the volume of cut and fill between the stations in a table.
View 3 Replies
View Related
Jun 15, 2011
I have created Table styles for Structures in Autocad 2009 Civil 3D, but now I have Autocad Civil 3D 2011 and the Table Style Fill appears black in paper space.
View 2 Replies
View Related
Nov 12, 2013
When I use ImportSubassembly API to import my subassembly created by Autodesk Subassembly Composer into my civil project, it reports error-"eFilerError".
the code like this:
atcFile = @"D:9f92eaa4ef514ac982518852e1169932.atc";
itemId = "ab660722-c69d-4ade-b373-0e9f99c94e55";
SubassemblyCollection subassemblyCollection = cDoc.SubassemblyCollection;
ObjectId subassemblyId = subassemblyCollection.ImportSubassembly("TestSubassembly", atcFile, itemId, this.doc.Editor.GetPoint("Select import subAssembly location").Value);
However, it is OK if to import subassembly provided by Cilvil 3D.
View 9 Replies
View Related
Oct 11, 2011
On "TEXTFILL", Help says:
Controls the filling of TrueType fonts while plotting and rendering.
0
Displays text as outlines
1
Displays text as filled images
Q1) It doesn't affect the text visible on monitor? Does it? I was expecting to see the result in Print Preview or Print to PDF before plotting to paper but I couldn't. Does it mean there is something wrong or still it will be OK if I plot to paper?
Q2) It is only for TrueType fonts so it doesn't affect other fonts (what other fonts could be? because all fonts in my ACAD are TT)
View 9 Replies
View Related
Jul 26, 2012
Does Inventor Pro 2013 works with Vault Pro 2012.
View 1 Replies
View Related
Jan 9, 2012
I have code that works just fine in AutoCad 2010 (just plain ol' AutoCad), but will not run completely in AutoCad Mechanical 2012. The code will draw lines, arcs, circle, plines, etc. as well as insert blocks. The command to insert the block has the entire block path so I don't have to rely on setting that up for everyone.
In AutoCad Mechanical only the blocks show up. No lines, arcs or anything else is drawn. I do not use a command method (like in LiSP) to create those objects, I create them through the block table and block table records.
What do I have to do to get my code to run in AutoCad Mechanical 2012?
View 8 Replies
View Related
Dec 26, 2011
I want to create one Spur Gear in inventor with equations such that i can build more gears from this base model using excel table. For. Eg. I would like to create a gear with 40 No. of teeth of 10DP, and 20°PA, with Pitch Circle Dia, Base CIrcle Dia, Tooth Thickness based on spur gear calculations.
Now i would like to create a series of such spur gears with varying no. of teeth, i.e. 42, 44, 46, 48, 50..etc. Now if i change the No of teeth ,Accordingly the gear should modify its pitch dia, Base circle dia, Tooth Thickness which would be noted in the Equation.
how to create thes equations and use these in creating gear with different no. of teeth.
I have shown below list of gear data for various no. of gear.
View 8 Replies
View Related
Apr 18, 2013
I have made this rule, that should fill out a cell in a spreadsheet with a text from IProperties.. but it seem to work only the first time. 2nd time i run it, nothing happends... not even the msgbox at the end...?!
GoExcel.Open("I:TEGNINGSNUMRE SKEMAERStandard nummer udtagning-test.xlsx", "80000")'Get new partnumber from Excel'Find next empty row in Column BFor RowPN = 2 To 1000RowPN = RowPN + 1If GoExcel.CellValue("B" & RowPN) = 1 Then'Insert title from open DocumentGoExcel.CellValue("C" & RowPN) = iProperties.Value("Summary", "Title")End IfNextGoExcel.Save()
View 3 Replies
View Related
Jun 13, 2013
I am doing a placement at company and they asked me to edit a drawing but i don't know how to convert or import the file.
View 2 Replies
View Related
May 2, 2013
My Edit/Fill command (shift + F5) has suddenly turned into Grow. I've seen other people with this problem and the only solution I have seen up to now is to use (shift + delete) instead. That to me isn't a solution, it completely disrupts my workflow to try using a new key command that should be something else. I've also read about people deleting preferences, restarting, etc, and I've tried all of those things. I did have some issues with my Function keys because of something I had clicked in my finder preferences but I fixed that issue, and it seems that only Photoshop has lingering problems. And of course, my PSD keyboard shortcuts all look fine, nothing has changed there so something is overriding the keyboard shortcuts. Could it be something in my Photoshop preferences that I'm overlooking?
View 3 Replies
View Related
Feb 23, 2012
Is there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
View 4 Replies
View Related
Jun 23, 2013
Let's say I have a rectangle and I want to fill a table inside of it.
The below is the code snippet I wrote.....
Table tb = new Table();tb.NumColumns = 5;tb.NumRows = 40;tb.SetRowHeight(C_height / 40);tb.SetColumnWidth(C_width / 5);tb.Position = new Point3d(ext.MaxPoint.X, total_MaxPoint.Y, 0);tb.Width = C_width;tb.Height = C_height;tb.SetTextHeight(C_height / 40, (int)RowType.DataRow);tb.HorizontalCellMargin = 0;tb.VerticalCellMargin = 0;btr.AppendEntity(tb);tr.AddNewlyCreatedDBObject(tb, true);
Where C_width and C_height are the width and height of the rectangle respectively.
Then, I got the following
The red line is the specified rectangle. It seems like SetRowHeight and SetColumnWidth are not working.
FYI, the rectangle size is around width = 3.5m height = 5m.
View 3 Replies
View Related
Feb 18, 2013
I want to know if you can link AutoCad tables to other Autocad tables on different layouts. Say I have ten sheets, each with a table for quantities of pipe length, and one sheet with a total of all quantities. Can I link cells from each separate layout sheet to the main table sheet, so that I can add them all for project totals?
View 3 Replies
View Related
Sep 24, 2013
know of a way to automatically alternate a background fill color for every other row on a table (gray, white, gray, white, etc.)? I can set up the fill color manually for each row, but if I delete or add a row, I have to manually redo the alternating fill color.
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
View 5 Replies
View Related
Oct 1, 2013
Any LISP routine that I can run that will make alternating rows of color in a table?
I can setup a table with the TABLE command and setup the rows to alternate gray and white, but if I add or delete a row, the alternating background fill pattern gets messed up (see attached example). Manually redoing the pattern isn't bad for a few rows, but for 30 or more it's a real pain.
If I could run a command that would activate a routine that would start with gray at the top and then alternate white and gray for every row for the rest of the table, that would be awesome.
View 3 Replies
View Related
Jan 17, 2013
I'm able to print pasted excel table with default colors ( ie: cell with text and fill with color background in autocad. By using Autocad 2013, with I can see the default colors when preview, but once I printed out to hard copy or PDF format, its only printed text but without any color background, I have try to print the pdf file by using DWG To PDF.pc3, Adobe PDF & CutePDF Writer, HP Design Jet T1120 plotter, all have the same result.
View 8 Replies
View Related
Jul 31, 2012
is it possible to fill enclosed polyline in plot style table editor? i prefer different modification for viewports.
View 8 Replies
View Related
Sep 27, 2013
(in Inventor Pro 2014,64 bit):
I've made an stairs assembly that contains adaptive parts that are all controlled by the assembly parameters.
Here is my assembly and the controlling parameters. The stringers on the side are made with the frame generator and use the "extend" feature to get the appropriate length, as driven by the parameters. The reason I used frame generator is so that I can easily change sizes of the stringers down the road, if needed. I chose to make the parts associative so I could control all of the parameters from within the assembly instead of opening each part separately.
My goal now is to be able to use this assembly (or something similar) as a template to create new sets of stairs, all to be placed in the same main assembly.
I attempted to duplicate all of the parts (append a "2" at the end of each file name and replace components in the new set of stairs with the 2nd version) but ran into problems with the two stringers. I can't figure out what to do to get the Frame00001 and Skeleton00001 to reassociate to Frame00002 and Skeleton00002. So any time I change my slope, the original stairs will end up trying to copy the new stringers instead of keeping the old ones.
how can I make this assembly reference a new frame, and secondly?
View 2 Replies
View Related
Jul 29, 2011
I have a table linked to an Excel spreadsheet, I unlock the cells and then right click but the Data Link sub-menu is greyed out and not available. Cannot delete the link in the data link manager becasue it is in use. Had to open the drawing in 2011 and detach the data link. 2008 also detached the link no problem.
How to detach a table link?
View 9 Replies
View Related
Sep 4, 2012
Is it possible to export the contents Table directly into Excell from AutoCad2012?
I've tried the Data extraction wizard but it seems to export the Table attributes/properties and not the contents of the table.
View 4 Replies
View Related
Jul 24, 2013
How can I create a subassembly..AND hot to add a Pave 3 option or another subbase depth.
View 9 Replies
View Related
Nov 18, 2013
We are trying to edit a small portion of an existing corridor by adding a generic daylighting subassembly. The add subassembly tool in the Corridor Section editor works, but we get an error because the new sub doesn't have a target surface specified. how to add a target for a sub that is added after the corridor was created?
Civil 3D 2012 & 2013 & 2014
Toshiba Qosmio X505-Q890
2 x i7 - Q740 quad core CPU's
8GB of RAM
60GB SSD + 500GB HDD
NVidia GeForce GTS 360M - driver 8.17.13.0697
Win 7 Home Premium
View 9 Replies
View Related
Aug 28, 2012
I need to transition to one subassebly to another. The first subassembly is at existing ground the other assembly is above ground. See following picture:
I need to transition from station 12+50 to 13+50. See following picture:
Here is a picture of the Corridor Properties:
Do I need to make a different subassembly in between the two stations? Is there a command I am not seeing that does it for me?
View 9 Replies
View Related
Aug 15, 2013
I know this sounds like a really stupid question. Where is the subassembly composer? We have Civil3D 2013, and my understanding was that the subassembly composer was supposed to automatically install in 2013 as opposed to previous years when you had to download it from the Subscription Center.
C3D 2013
64-bit
View 4 Replies
View Related
