I am currently using dual monitors and whenever I open or create a new document in CS2 it wants to go on top of the menu bar till I move it. This gets annoying after a while when trying to edit multiple documents. Is there a way to make the Menu bar always on top and the documents to just live in the work space below it and never go ontop of the others? I know this was possible in earlier versions of photoshop.
View 10 RepliesPS CS5 had icons in the top menu bar where the "Arrange Documents" icons were located. Now I can only find them in the Window drop down list. Are they still available in CS6? It was nice not having to find them in the "Window" drop down list.
View 1 Replies View RelatedI remember reading somewhere that two windows could be opened for the same document allowing one to be worked on while zoomed in and the 2nd would update to show the changes.
How do I open two windows of the same document?
This is a neat trick as it allows document to be worked on without continually zooming in and zooming out to see how it all looks.
I have a psd dynamically linked to an Encore menu. When I go into PS my cursor has changed into what looks like a hand over a book or maybe a paint bucket.It wasn't there yesterday even though the doc was linked then as well...
View 2 Replies View Relatedwhen I click on the hdr toning menu it comes up too large, it obscures the image and I cannot move it around as the blue border at the top is not there...is there a way I can make that menu/window smaller...so that I can see the image and move it around...the sharpen image is quite large as well but there is a plus/minus widow which allows to see the image
View 20 Replies View RelatedI've installed CS6 (CS5 is still on the machine), and in the Bridge Menu, there is no longer a Batch menu item for initiating actions.In Bridge's Edit/Preference command, I have the Startup Scripts checked.There are no files in the "Startup Scripts" folder.
I don't see a "Startup Scripts" folder in CS5, only in CS6.I can still do batch operations directly from Photoshop CS6's automate window, however, I like the ability in Bridge to select specific files on which to run the action.
Whenever I maximize a document in Illu. CS6 it overrides the application menu! It simply covers my whole screen making it impossible to reach my menues unless i drag the documents corners to make it smaller or click the minimize icon.
View 12 Replies View RelatedOn a Mac -- CS6..All of a sudden my document windows refuse to resize. I was sent an Illustrator file by another artist and now all windows only open to the size of his window. Can't change any of them.
Tried restarting the program twice and thought I reset my preference.
Unable to print document on windows CS6.6..Not enough memory was available or an object was too complex. Reducing the size of this document window may work. Document was created on mac book pro CS 16.2.1.
View 3 Replies View RelatedWhen I do double click to open a file of Illustrator, the application starts with a little interface and then a dialog box that says "Not enough space for the window, increase the size of the document and try again" appears.
View 1 Replies View Relatedfor example:
Colours > Curves ..... nothing visible. The toolbar shows the Curves options (histogram; sample average).
This happens for all selections in the Colours menu; all the other menus are working fine.
I know finding the magic words to use in a search can be the ticket!
I uninstalled gimp removed the .gimp2 preferences and reinstalled--
Edited: well this is embarrassing The png I was trying to edit with Curves had Indexed Colour layers.
I have a problem when switching between different programs, eg LR, Word, itunes, Firefox. When returning to LR, it has moved behind the task bar which is fixed on the left on my screen. Since the file menu is then covered by the task bar I have to shut down LR frequently via the task bar. This only happens with LR. I am using LR 3.4 on Win 7 Prof 64bit on a Sony notebook.
View 7 Replies View RelatedI signed up for Adobe Creative Cloud, so that I could evaluate the latest version of Illustrator and Photoshop. I downloaded and installed Illustrator, however my computer crawled after the install. So I had to do a System Restore back to before the download and install of Illustrator.
After the System Restore, I again downloaded and installed Illustrator. The program showed up in the programs menu. I then downloaded and installed Photoshop and Dreamweaver. But after that, two separate versions of Photoshop show up - regular and 64 bit (I only downloaded and installed one version of Photoshop), and Dreamweaver. Illustrator no longer shows up in the Windows 7 Programs menu. How is this possible???
I looked in C:Program Files, and a 342MB Illustrator CC file is there. But I cannot find a .exe file in that file, and so cannot start Illustrator.
Worse still, when I try to download and install Illustrator once again, Adobe Creative Cloud shows me as having downloaded and installed it already, and that it is working perfectly - which is of course, NOT TRUE! Creative Cloud will accordingly not allow me to download and install Illustrator again! So while Creative Cloud thinks I have a worling version of Illustrator CC to try out and evaluate, I in fact do not!
What happened, and why the version installed in Program Files folder is not showing up i the Programs Menus of Windows 7, and or what I can do to get Illustrator to start up.
All the products installed on my Win 7 Pro 64 Start Menu show the jumplist properly, including Corel X5. This is not working for X6. Yes, I know I can use the Open Recent. menu once I am in CorelDraw.
View 4 Replies View RelatedI've created a pdf file (with illustrator cs3). when I try to open it on photoshop CS3 I receive this message:
"error opening the portable document file (PDF) document. error code = 0X20030055"
I can open this pdf file outside photoshop.no problem openning other pdf files on photoshop.
I inadvertently saved a document as a jpg and wondered if there is any way I can convert it to a document file that is handled more easily with a file that is other than a photo file?
View 1 Replies View Relatedas of yesterday i have been receiving an alert when i try to move a jpeg into a new photoshop doc stating that my target document has a different depth than my source document and will (which it definiately does) result in lower than expected quality.
Photoshop specs: CS6; RGB; 16 bit; Res 300 pixels/inches; size: letter; (advanced setting - don't know what these are) color profile: sRGB IEC61966-2.1; Pixel aspect ratio: square pixels
A co-worker scanned a photo and emailed it to me to edit it and try to improve it, but everything I want to do is grayed out so I can't select it and I can't figure out why. Maybe it has to do with how she scanned it?
It's CMYK, 300 dpi, and 8 bit.
I'd like to sharpen it and adjust the hue/saturation, but they're grayed out.
why this is happening and how I can work around this so I can make the changes I need to make?
When selecting a sub menu from within a main drop down menu the arrow points to the right but the actual sub menu pops up on the left in most cases. I have only noticed this recently and wonder if I have inadvertently messed up a setting as in the past I cant recall this being so but I don't use the editor a lot so may be mistaken.
View 9 Replies View RelatedI have autocad civil 3d 2008 in my pc. From last 2 days I got a different problem i.e. when I am selecting open / save command from File menu graphical file select explorer is not opening just message in the command window . Previously I used to select files using graphical file explorer.
View 6 Replies View RelatedThe code below crashes with an "attempt to write to protected memory" in debug mode (it crashes when it hits acDocMgr.add)but in the Release version it works fine. I am using Command Flags.Session
Dim acDocMgr As DocumentCollection = Application.DocumentManager Dim pStyle As Integer = Autodesk.AutoCAD.ApplicationServices.Application.GetSystemVariable("PSTYLEMODE") Dim acDoc As Document = Nothing If pStyle = 1 Then acDoc = acDocMgr.Add("acad.dwt") Else acDoc = acDocMgr.Add("acad -Named Plot Styles.dwt") End If
I tried to print thisdrawing.modeldocument in a vba sub, but it doesn't work.
View 4 Replies View RelatedI recently upgraded to 2012 but forgot to install the express tools, Doh!. I installed them through control panel repair and everything works. Except when I close and restart ACAD the menu bar express menu disappears. I can bring it back by using cuiload but this is not ideal. Any way to get it to stick?
AutoCAD 2012
Dell Precision T7400, Intel Xeon @3.4GHz
Win XP 32bit 4GB RAM
Nvidia Quadro FX 3700
Cyborg R.A.T. 7 mouse
How do I add custom menu items to the main menu in Illustrator?
I would like to build my own menu with scripts that I use alot. This is a powerful feature that I use alot in other programs, but I have not seen any examples of this in illustrator.
all the twirly triangle dropdown menu things (what's the official term?) underneath the contents menu of layers. Especially now that I'm working with Convert to Shape Layer functionality I'm wondering what an efficient/shortcut based way to work with these inner menus is. For instance when converting Text to Shape layers - it seems like I'm spending most of my time dealing with twirly triangle management
I don't even know how to search for them: obviously searching for anything "collapse" takes one to a bunch of collapse transformations stuff.
Using VS X5 - Just making up a menu for my dvd im burning. Haven made a menu since using ..VS11+ I think it was.
All seems very very familar...similar etc and not asking it to do anything out of the ordinary which 11+ couldnt cope with ( just nowadays using all this AVCHD malaky etc )
Question -Main menu of my dvd - Why am I getting on my main menu page the begininings of my movie!!! I have my main menu setup ( bringing in a pre-made 30second clip on which I will put 'Press Play to watch movie' and/or 'chapter select'. ) When i preview my main menu page...I see the 30second clip i wanted but as it runs so too does my actual movie - at the same time.
I cant seem to find a button to ..basically..tell it not to play the movie as soon as you load the dvd but instead to wait until the 30 second main menu runs and automatically reruns etc until YOU decide to press the 'Play movie' button.
I intended to add more option at right click shortcut menu. Is it possible to be done?
View 2 Replies View RelatedI want to add the menu in the main menubar where the File Edit etc. are there.
how to do this using .NET ?
I am working on a plugin for adobe illustrator CS6 by using adobe CS6 SDK. By using this plugin I need to add a Me nu Item In File Menu of Adobe Illustrator.
I have used the following code for this:
______________________________________________________________________ ________
SPBasicSuite *mBasic = message->d.basic;
AIMenuSuite *sAIMenu;
mBasic->AcquireSuite(kAIMenuSuite,kAIMenuVersion, (const void**)&sAIMenu);
SPPluginRef plugin;
[Code]...
But i have nothing as output.
Why can't Windows Explorer show thumbnail previews of DNG's on my Windows 8.1 64bit Pc. I assume is has something to do with not having the DNG codec. However, on Adobe's website it says their DNG codec only works on Windows 7.
View 4 Replies View RelatedThis just started happening after I downloaded DWG TruViewer. I am working on LT 2008 using Fusionware on a MacPro. I needed the viewer to convert newer drawings from an architect. Now, when I double click on a drawing in Explorer a separate AutoCad window opens for each drawing I need open. I prefer to just go up to Window>and click on the one I need at that time, especially if I have several to switch between because it is easier to see the file name I want.
SDI is set to 0
Taskbar is set to 0
Relaunched the program
I can't open files using File>Open because the program crashed each time and Autodesk is not issuing anymore fixes for 2008. (Yes, we should upgrade but there is no money budgeted)
Right-click on any .dwg file and go to Properties>General>Change> and select the AutoCad LT launcher as the preferred program
Since I am in Window 7 instead of XP the File Types tab has been removed from Folder Options so I can't fix it that way.
So, why did this change? FYI that stupid TruViewer made lots of unnecessay changes to my AutoCad and Explorer programs that I am still trying to sort out like changing the file icon and hiding the file extensions. Are they trying to make it hard to find files or what?
And next, how can I reset the default so that double clicking on a .dwg in Explorer opens in already open AutoCad window?