CorelDRAW X6 :: Publish To PDF And Links
Nov 29, 2012
I have a multi page document that contains links to various large tiffs. The filesize of cdr is decent to work with and it preserves them until I publish it to pdf .
Any changes made to document after this operation will increase the document file (at the next save) like the images are embedded , not linked. However, in the links panel still show up as links, but properties of images mention their full resolution instead of a thumbnail size, and working space enhanced view show that.
I tried for test with one page and only one image and confirmed this behaviour.I couldn't find any solution to this and I keep closing the document after publishing and open it again for changes.
View 1 Replies
ADVERTISEMENT
May 29, 2011
I have a problem. I need to redesign the catalog for a certain company. Actually, it's a minor update, but the previous catalog, only available as a PDF has many clickable links inside it. When I open this PDF in CorelDRAW X5, update it and resave it, the links are gone. Is there a way to import the PDF with links, and save it also with the same links?done yesterday
View 3 Replies
View Related
Apr 15, 2014
I'm reconstructing an old document originally developed with PageMaker. I've recreated a half dozen pages hopefully with more uniform techniques. The original line art for the pages was created in AutoCad and some were scans. To bring them into InDesign some of the art is now in psd format and some of the newer art is in Illustrator AI format.
I've noticed that the pages with photoshop art print pretty quickly (about 30 seconds). The ones with Illustrator art take much longer (about 1:30 seconds). They go through a flattening process.
I print these 50 page books on demand and that additional time would add about an hour.
I guess the question is whether this is normal and to be expected or not. If it is I'll likely turn everything into raster before going into InDesign. That, however, seems like quite a bit of extra work. Going from AutoCad to Illustrator (to add stroke) then to PhotoShop to change to raster and then into InDesign seems like a pretty convoluted work flow.
View 3 Replies
View Related
Apr 23, 2012
How do I maintain links and bookmarks in a PDF? I recently created a multi-page document in X5 with links and exported to PDF. All of the links worked successfully in the resultant PDF.
Yet when I imported the PDF into X6 (and X5) for editing, the links had all gone. I'll need to edit on a fairly regular basis and I don't want to re establish the links (a lot) every time.
View 4 Replies
View Related
Dec 11, 2012
When I publish to PDF (web setting plus include links) the links do not hold. How to I get the links to stay in the PDF document?
View 6 Replies
View Related
Jul 18, 2011
Having a problem with a document i created that contains instructions how to use one of our customers application, the document has an index that points to different pages but also a few urls that point to servers or into jboss application servers(long url) when i save the cdr file and export to pdf the links are not always right, the index pointing to top of page 5 now points to a https url and one of the https urls can point to top of page ...
This is rather frustrating since a simple edit requires me to verify all the links, for instance a url that points to a customer internal wiki page is correct in the cdr file but wrong in the pdf.
I have tried different settings for the pdf export but i haven't seen any difference.
I have noticed that links are changed even when i just save the cdr file and reopen it later, not all but some, seems rather random which ones.
Running windows 7 64 bit 4 gig ram, corel draw x5 is updated with sp3, the cdr file contains 29 pages at this point.
View 14 Replies
View Related
Nov 28, 2012
I am running X6 on Win 8 Pro. I Externally Link a picture into a CD file using UNC naming. I also Externally link using a mapped network drive and a local drive. In none of these can i get the Edit Links option to not be grayed out.
I am using the FIle --> Import --> External Link option to insert the image. I have tried changing the linked image, closing the CD file and the reopening it and it does not update the graphic. I am stuck with the original which is what i do not want.
I have gotten this to work on older versions of CD and have not a clue what is going wrong now.
View 1 Replies
View Related
Oct 16, 2013
Sometimes I am working with "heavy" files, images of huge size and when I thrown them to corel it really starts to slow down. My question now is, if I remember correctly there is an option when you import an image to corel it just keeps the path of the image and adds the image on corel on very poor quality just for you to work easily. When you are finished you just make something and the paths of the images are replaced with the originals.Where can I find that option?
View 6 Replies
View Related
Apr 22, 2010
I use X4. I have 2 oval shapes drawn and want to interlock them to look like a chain linked together.
View 5 Replies
View Related
Jul 16, 2011
I would like to have a quick way to access some T-Shirt proof images quickly.
What is the best way? Toolbar, docker?
I saw the scrapbook docker, but then I have to scroll through all my files. Not sure if it remembers a folder on open and close..
View 14 Replies
View Related
Jun 7, 2013
I use CorelDraw Windows 7. Everything was fine for 2 days. Now, you can not publish to PDF from. We use CorelDraw for 3 years at the PDF edition for my work. Now the pdf is empty by opening acrobat and zoom is set to 5603%. I get this error when I try to change zoom to 100% "document (14)."
View 14 Replies
View Related
Nov 7, 2011
When I use the Publish to PDF, it either creates a PDF file that is corrupt, or Corel itself crashes (Windows 7 64) give me a "this program has stopped working" error.
I tried uninstalling / reinstalling but it still does the same thing.
View 5 Replies
View Related
Dec 28, 2008
I'm using CorelDraw X4 on a Windows Vista Home Basic System. Trying to "Publish to PDF" produces empty PDF Files, with a page size of 0 mm x 0 mm. The original File has a layout of (German) A4 and a textbox with "Test".
There are no error messages.Even using a PDF Printer (FreePDF XP) doesn't produce a file, but gaves the error message
"%%[ Error: undefined; OffendingCommand: -0,15789 ]%%GhostScript Error 1. Error, no PDF file produced! (False)".
View 14 Replies
View Related
Aug 7, 2012
I am a musician doing the CD cover of my band's 3rd CD.
On the CD back I have images, text and the usual barcode. How can I publich to pdf from X5 so my images keep CMYK and my barcodes keep Black & White? My CD label gave this comment after the pdf I sent them:
"I think you do not understand that the barcodes and codes in general HAVE TO BE IN BLACK/WHITE. You cannot just integrate it in the 4 colour artwork as if it is a picture."
I use X5 upgraded directly to SP3 and PDF file shows Corel PDF engine version:15.2.0.686
View 13 Replies
View Related
Aug 16, 2013
I am attempting to publish a pdf of a booklet I've been working on. It is currently set up with facing pages.
I want to publish it as a pdf, but so that it maintains the booklet format. That is, when it opens as a pdf, one should see both left and right hand pages, as one would browsing through a regular book.
How does one do this with Corel? I know once one has published, one can open the pdf and change the view setting to 'two page display.' I want this to happen automatically when the viewer opens the document though.
View 4 Replies
View Related
Sep 26, 2012
i have a problem with corel draw x4.
So: i create a document and publish it as a pdf. That works.
But when i open the pdf with acrobat the document is empty. Just a white paper.
View 14 Replies
View Related
Oct 24, 2011
I am working in CorelDraw X3 and when I publish to PDF they are coming out blank? I have made many before and they are fine, I know to position it in the page, but still nothing? I am using Windows 7? By doing it through the 'prepare to bureau service' they work fine except the file size is massive?
View 3 Replies
View Related
Sep 29, 2011
Screenshot PDF Problem.jpg
When I publish something to PDF (in order to send it to a professional presser) the cutting lines are set on the 'bleed edge' instead of excluding the neccesary bleed margin of 3mm. In other words I am not able to provide any PDF document with a bleed margin which is (obviously) very frustrating for the pressing company as well as for me.
- In Publish to PDF > Settings > Pre-press I checked the cutting-line box ( I work with a dutch version so excuse me if the the right translations aren't used. Check attached file for the settings).
- When I check the box 'Aflopen' (just above the cutting line box) the PDF file turns out white.
View 14 Replies
View Related
Feb 10, 2012
I am using Corel X5 in Windows 7 OS having 4GB RAM with Intel Core i3 processor. When I converting cdr file to PDF with prepress PDF preset will resulted a crashed PDF file. But with 'web' PDF preset may results fine. But the resolution goes high or custom , output is a crashed file.
View 7 Replies
View Related
Apr 21, 2011
My CorelDraw suddenly stopped to produce PDFs. The dialog "Publish To PDF" opens fine, but when pressing "Save" it won't do anything after a while of loading. Usually it starts to process the file and a progress bar is shown, but no such is shown and no file is produced. The settings opens fine and no problems there.
Re-installing has been tried without resolving the issue. Different files has been tried, same problem.
View 9 Replies
View Related
Apr 2, 2013
when I use publish to pdf with bitmap downsample image in cdr file deleted in pdf file. I am using Coreldraw X6 and another problem is that I have checked preserve pure black in color management. but i noticed that r0b0g0 in rgb bitmap also converted into Black100.
View 5 Replies
View Related
Dec 10, 2013
I regularly design multi-page design drawings for sign manufacturing, and was operating normally in X3 on a Dell Dual Core up to yesterday, when suddenly app won't successfully publish to PDF. It just spins, or produces a file that has blank pages or some huge empty file that shows it to be over 150MB in size (normally my files are under 8 MB). I tried a complete uninstall/reinstall of program twice now, but only to have same results.
View 5 Replies
View Related
Jun 14, 2012
I am making a Blurb photo book in CDx4. Everything goes very well. But then I try to publish the result to pdf/x3, as requested by Blurb. The colors of the bitmaps are wrong, dull. I try to publish to acrobat 4. Everything is all right. Other pdf formats seem to do very good as well.
I think it has something to do with rgb and cmyk, but whatever I try to change, it does not work. I converted the bitmaps to cmyk, I changed things in the color management (had things with that in the past -> color management off seems the best), nothing works.
View 4 Replies
View Related
Oct 12, 2012
when I trying to publish in single-sheet file. so I type publish on my command bar, then I chose publish to pdf but when i try to click on publish options to set the location where I need to put the pdf files the publish window freeze. same thing when i click on add sheet button.
NOTE: I have this problem especialy when I used AUtoCAD from home. to use AutoCAD from home I made borrow licence.
View 1 Replies
View Related
Aug 13, 2010
I managed to get a nice set of different settings to publish a corel file to pdf. Now I would like copy these settings to multiple other pc's in the office. where a can find the file/folder in which these settings are being saved?
Otherwise I would have to set all different pc's individually and I rather spend my time otherwise.
View 6 Replies
View Related
Jan 18, 2008
When you print a file from corel you have the option to choose always overprint black, but when I make a pdf with publish to pdf in the advanced tab I have only the option to preserve document overprint, and the black text is knocked out. Is there a solution to that, other then manually setting black text to overprint fill in corel?
View 11 Replies
View Related
Jun 21, 2011
I am be able to publish to PDF, but unsure how to set the color mode to CMYK?
View 2 Replies
View Related
Aug 21, 2009
I have a cdr file with text and two bitmaps, each of which has a lens with radial transparency.
Publish to PDF outputs everything but the lens-ed bitmaps. I tried many different Publish to PDF Settings. Nothing works.
When I "convert to bitmap" each lens-ed bitmap, Publish to PDF outputs them fine.
View 14 Replies
View Related
Oct 23, 2012
Is there a way to automatically convert each page of a document to bitmap in the process of publishing to PDF? maybe a macro that does this?
View 2 Replies
View Related
May 19, 2011
I have just completed a 25 page document using hundreds of symbols but when I have just tried to publish it to PDF certain symbols do not appear?
I have looked back through the file and found that the ones that do not appear also no longer show the image in the symbol library but when i insert them in to the drawing they show up fine.
View 4 Replies
View Related
May 9, 2013
Using AutoCAD 2013, myself and several other coworkers have encountered an error message when creating a pdf with the publish command. I attached a screen shot of it.
We never experienced this in earlier versions. It doesn't happen 100% of the time, but it has been recurring more in the past month. I have restarted the computer after receiving the message and then invoked the publish command after restart and it was successful. I'm not going to do this every time I publish, nor do I see the need to turn off background plotting. That just seems like a bandaid fix.
I even tried publishing with different page setups to determine if it would react differently to any page setup, but it doesn't. I attached a view of my publish window, as well.
View 1 Replies
View Related
