AutoCAD Civil 3D :: How To Create Secondary Containment Wall
Jun 3, 2012I don't know how to create the secondary containment wall by civil3d.it's the same as creating the retainment wall assembly ?
View 2 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Can't Create Intersection - One Or More Of Secondary Road Profiles Cannot Be Locked
Oct 1, 2012I have made 11 successful intersections in my subdivision, but there is one that just won't work!
When I get to the point where I want to set curb return parameters, the dialog box pops up but there is nothing listed under the quadrants.
If i go ahead and try to make the intersection anyway, I get this message: "one or more of the secondary road profiles cannot be locked".
AutoCAD Civil 3D :: 2012 Retaining Wall Assembly And Wall Height?
Jul 23, 2012I am using the RetainWallVertical subassembly with a created gutter subassembly attached to the wall and a DaylightGeneral subassembly attached to the gutter assembly. My cut slope parameter is set to hold at 1.5:1. I would like to use a target (feature line or alignment) to daylight to and have the wall height adjust accordingly. Problem, I am not able to use a target other than a surface for daylighting. I can use my existing ground surface, which I am daylighting too, but I can't adjust the target point.
View 2 Replies View RelatedAutoCAD Civil 3D :: Intersection - One Or More Of Secondary Road Profiles Cannot Be Locked
Nov 20, 2013When i create an intersection, I get error - " One or more of the secondary road profiles cannot be locked at this intersection . What do you want to do ". Both of alignments and profiles is a reference from a data shortcut .
View 1 Replies View RelatedAutoCAD Civil 3D :: Adjusting Intersections Secondary Road Profile
Jul 9, 2013I went forward designing intersection profiles with limited survey and simply made an educated guess for the secondary roads pgl tie in point. I have received updated survey and when I move the profile end point to meet existing grade it adds another pvi effectively holding the profile grade I set preliminarily. I'm keeping the lock point. Is there something with the return/ offset profiles preventing this edit? What is the proper work flow?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
Lightroom :: Unable To Create A Catalogue On A Secondary Drive?
Apr 17, 2013Using the Mac version of LR5 beta, I tried to create a Lightroom catalog on a secondary drive (the same drive my LR4 catalogs are on), and I got the following error:
Lightroom cannot create a catalog named “pics-5” on volume “/Volumes/Lightroom/pics-5” because Lightroom cannot save changes to this location. Lightroom Catalogs can not be opened on network volumes, removable storage, or read only volumes.
The drive is not a network volume, removable storage (it's a SATA drive on a Mac Pro), or read-only.
AutoCAD Architecture :: Unable To Create A Wall
Mar 18, 2013I've been having an issue with autocad architecture 2013. For some reason it won't let me create a wall. I can click it but it doesn't want to actually create anything. It just gives me the selection tool. I downloaded the service pack and still doesn't work.
View 3 Replies View RelatedAutoCAD Architecture :: How To Create Wall For Location
Dec 6, 2011I am working in Arch Desktop 2011 and need to make a wall for a upper floor and roof line with different plate heights. See the attached drawing for explanation.
What I'm trying to do is create an upside down "V" wall to fill in this area. This is an as-built drawing for an existing house with an addition.
AutoCAD Architecture :: Use Pline To Create Open Ended Wall
Apr 10, 2012I am trying to use a pline to create an open ended wall. When I try to 'calculate automatically' by selecting a pline the width of the wall (2 components 8" wide total) the dialogue comes up and asks which component I want to apply the endcap to. I want to apply it to both, but don't seem to have that option.
View 2 Replies View RelatedAutoCAD Architecture :: Create A Window That Slides Into Pocket In Wall
Mar 12, 2013Is there a way to create a window that slides into a pocket in a wall the way a pocket door does?
(I'd define a pocket door style for it but I'd like it to appear as a window for tags and schedules.)
AutoCAD Architecture :: Create Gypsum Board Wall With Metal Fittings Inside?
Feb 20, 2013way to create a gypsum board wall with the metal fittings inside?
I mean to have the fitting for example every 60 cm/ 25 in, and the metal frame on top and bottom of it.
Is there any similar wall in the ACAD architecture tools palette?
AutoCAD Architecture :: Create Barrel Vault Skylight That Would Work Similar To Curtain Wall
Jun 10, 2013it's possible to create a barrel vault skylight that would work similar to a curtain wall (i.e. stretch the skylight and it adjusts to a fixed size and adds mullions)?
View 1 Replies View RelatedAutoCAD Civil 3D :: Grading Against A Retaining Wall
Sep 8, 2012I have a platform at level 13.275m and nearby there is a retaining wall at aprox. level 4.0m.
For the wall i've made a surface using feature lines from EG till level 15.0m and then pasted into the EG surface to create the 'barrier' for the slope. But when i do the grading with the fill slope projection to surface, when it reaches the retaining wall section, the contour lines go crazy and if i do a quick profile, the fill slope line (obvious) is iregular, rather than a straight down line (2:1) going from level 13.275m till it hits the EG.
I've attached a picture to show the problem better.
AutoCAD Civil 3D :: Get Wall Thickness Of A Pipe
Apr 17, 2013The 2013 .NET API exposes just 10 of the 22 PartDataFields for Pipe objects. WTh (Wall thickness) is not one of them so I'm attempting to get it via Late Binding. This lisp code works, where (vl-sel) is just a helper function to select an object and convert it to a vla-object:
(setq pdr (vlax-get (vl-sel) 'partdatarecord))(setq itm (vlax-invoke pdr 'find "WTh"))
to get the PartDataField. However, putting this into my C# code, it fails on the Find portion with an exception
//ps is a valid PartSize objectPartDataRecord pdr = ps.SizeDataRecord;PartDataField diafld = pdr.GetDataFieldBy(PartContextType.PipeInnerDiameter);object[] args = new object[1];
object acadobj = ps.AcadObject;
object pdrobj = acadobj.GetType().InvokeMember("PartDataRecord", System.Reflection.BindingFlags.GetProperty, null, acadobj, null);
args[0] = "WTh";
[code]....
AutoCAD Civil 3D :: MSE Retaining Wall Assembly?
May 27, 2009MSE Retaining Wall subassembly? or any type of retaining wall subassembly that does NOT have a footing or where I can find one?
View 4 Replies View RelatedPhotoshop :: Create A Brick Wall
Jun 2, 2006how to create a brick wall?
I wanna make someone breaking through the wall.
3ds Max Modeling :: Create A Gap In Wall Profile
Feb 11, 2013Is there anyway to create a gap in AEC extended wall in 3ds max. I know to create a gap while using doors and windows. But I wish to create a gap without any doors or windows. I do not want to use proboolean also, because I need the properties of Walls too.
Is there any modifier to create proboolean? Can we create a curved wall using AEC extended wall?
Revit :: Can't Create Wall By Face
Mar 26, 2013I am trying to create wall by faces of a Mass I modelled.
This is the Mass: [URL]
Everytime I try to create a wall by face of one exactly face, it accept Location Line: By Finish Face Interior only, when I try to change ANY other Location Line, it gives me a message error.
[URL]
And it is always from the SAME FACE highlighted at the picture.
The mass was made by the floors and top edges. I select all of the edges and create a mass from down to top.
All the other faces are ok and they accept the wall by face and let them change the Location Line except this one.
Revit :: Create Wall Family
Oct 20, 2010Is it possible to create the Wall family in revit?
View 5 Replies View RelatedAutoCAD Civil 3D :: Simple Cylinder Wall Thickness
Apr 12, 2013I am experiencing a problem in 2013. In part builder, I am trying to add wall thicknesses to the simple cylinder. I was able to add options for inside diameter and set floor thickness to a list and add options for that, but when I try to set wall thickness to list instead of constant, I get an error in the value menu.
Everything disappears and in red at the bottom, I get a message about an error in calculations. I even tried temporarily deleting the With from any calculations, but I still got the error. I have had no problems doing this in 2011 or 2009.
AutoCAD Visual LISP / AutoLISP :: Construct Wall Centerline In The Middle Of Wall?
Sep 13, 2013i need a lisp that construct line between two lines of wall by selection called (Wall Centerline)
i attach example of what i want assuming that i will often isolate wall layer in the project to facilitate the task.
AutoCAD Architecture :: Make Cylinder Wall Or Closed Curved Wall?
Jun 3, 2013I can make a curved wall, now I need to make a "cylinder" wall or a closed curved wall. If a curved wall can be closed I cannot figure it out.
View 4 Replies View RelatedAutoCAD Architecture :: Wall Style Creation (Window To Cut Only One Portion Of Wall)
Dec 7, 2011I'm attempting to create a wall style that has 2 components, a framed wall and a brick veneer. What I would like to do is have this wall react a certain way when I insert a window. Basically, I don't want the window to cut into the brick veneer, only the framing.
I have attached my attempt so far, and I have not figured out how to get the window to only cut the framed portion.
AutoCAD Architecture :: Wall Intersection Clean Up For Different Wall Types
Jun 12, 2012I am having trouble cleaning up different wall types joining at or close to a corner. I tried to over ride the clean up radius....no luck.
View 9 Replies View RelatedAutoCad 2D :: Use Two Dimensions - Main And Secondary
Dec 16, 2011I want to use two dimensions, like main one and secondary second one, one above another in exact distance. i did not find it in the dimension style manager.
View 6 Replies View RelatedRevit :: How To Create Wall Schedule With Areas
May 22, 2012how to create a wall schedule with areas. To find out how much plasterboard, paint etc. I need for a building.
View 1 Replies View RelatedRevit :: Create Curtain Wall With Mullion
Sep 9, 2011How to create curtain wall with Mullion and insert in to project.
View 1 Replies View RelatedRevit :: How To Create Cornice Using Wall Sweeps
Sep 1, 2011I am trying to create a cornice using a wall sweep. I created the profile I need but when I load the profile and try to add the sweep to the wall Revit shuts down completely.
View 1 Replies View RelatedAutoCAD Civil 3D :: Fill Up From Retaining Wall To Existing Ground
Apr 11, 2012I have a feature line as the top of a wall and want to grade up away from it to marry to existing ground.
View 1 Replies View RelatedAutoCAD Civil 3D :: Rendering Retaining Wall - Large Surface On Top
May 3, 2012I am in Civil3D 2012, and am trying to render a retaining wall we doing. I set up a corridor, surface, and profile, and have it working with plans and such, but when I try my hand at rendering it looks rather odd. The surface is fine, and I can choose materials on the vertical wall subassembly, but It just shows a paper thin object ever 25' and a large surface on top. Does the top of the wall need a feature line as well.
View 1 Replies View RelatedAutoCAD Architecture :: Convert Curtain Wall To A Wall?
Apr 14, 2011I can convert a wall to a curtain wall but not a curtain wall to a wall. When converting a wall to a curtain wall I select wall in the design pallette right click apply to wall select the wall and it changes to a curtain wall. When I try converting a curtain wall to a wall I right click on curtain wall select apply properties to wall then go to select the curtain wall but I cannot select the curtain wall as a wall?
I simply want to convert an existing curtain wall to another wall type how is that done/