If I take a photo of document too close, the text is big in the center and small at the edge, the line at the edge is also curve. Is there a way to fix it in Photoshop or others application?
View 4 RepliesI need to squeeze a photo a little, along the vertical middle line, so that the final shape would be like a concave lens placed horizontally (instead of square).
View 1 Replies View RelatedWhen I go into Full Editor I have The Learning Center on the left and to the right of that I have the Tools Toolbar.
My problem is that these overlay the photo I am trying to work on. I do not think this happened before. I am sure I did something to cause this but I do not have a clue what that would have been.
It seems to me that the workspace for the photo was to the right of whatever was on the right.
I am saving an adobe illustrator file as a jpeg for print at a photo center. When I export to save with a 300ppi, the photo center (Target) doesn't recognize the jpeg file. When I save for web, the photo center recognizes the file, but it prints very low quality (pixelized). Both jpegs are being saved at high quality.
View 12 Replies View RelatedIs it possible to select a center point to work from, rather than an edge? (i.e. not rectangular select)
And tell it to keep an aspect ratio?
When I try to print and select "center" the image does not center on the page. CS5 worked fine originally but after the last update it too seems to have this issue. From what I can observe it seems as if someone thought that showing the printable area on a page was useful and somehow that may have been worked into the calculation of what centered (on the long dimension of a print) is. Engineering aside, if you actually try to sell your work, your client / customer only sees that the image is not centered on the physical sheet. They don't care about the printable area. The only work around I have found is to uncheck "center" and key in 50% of the difference between the actual print size and the actual paper size as a margin. I don't want to scale prints. I need to print to specific dimensions.
For reference I am using a PC running Windows 7 and an Epson 4900 printer
I have wanted to know how to create things like circle gradients from the exact center of the canvas.
I know how to create a gradient, but the problem is, it's really hard to pin point exactly where the center of the canvas is, and sometimes I need it to be as perfect as possible.
I'm sure this is mind-numbingly obvious and I am overlooking it, but when I go to use the rotate tool, the center point of the rotation is defaulting to the center of the artboard, not the selected group of objects. How do I change that to default to rotating on the selection center by default?
PS. This is Illustrator CC (17.0.2) on a Mac running 10.9, if that is relevant.
I'm having some fits with the constrained orbit center. It seems to me that It used to always be in the center of the screen when I would use Shift and CMB. Now it seems to be stuck on the center of my assembly/part. I know that I can hit F4 and long select LMB to re-center but I have never had to do that before the last day or two. I have uninstalled all the Beta Add ins I had installed and I have even uninstalled and reinstalled Inventor Pro 2014.
Is there an option somewhere that puts the default Orbit Center to the center of the screen?
How to keep the “center mark” at the center of the circle or arc?
I wanted to keep the “center mark” at the center of the circle but sounds not to work!
Is there a way? Or do we need to draw it using the “point” command?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
In Photoshop / Illustrator, when I create a polygon, and rotate it around it's center point it wobbles. When I scribe it inside of a perfect circle, and rotate it around the circle's center point it rotates smoothly. Basically proving that (at least according to these Adobe products) that the center point of a circle is different than the center point of a polygon scribed inside of it.
An image – the dots in the center are the corresponding center points according to Adobe:
[URL].......
This is incorrect according to basic math. Is Adobe aware of this bug?
When trying to place an image into a new document in photoshop elements 12, I select all-copy-paste the image (or even drag it) over to the new doc created. However, when I do this - the image does not paste in at the same size. It typically shrinks down in size. Do I have to save the file, close out and then open the new doc and PLACE it in the document in order for it to keep size? There must be a better way to do this. Basically, how can I drag a photo that is 4x6 over to a new doc while keeping the size at 4x6.
View 5 Replies View RelatedI want to enlarge an image on a digital photo and save the enlarged image as a seperate photo
View 5 Replies View RelatedI am trying to open a photo in camera raw and the image always has a lot of red and blue in the picture? What can I do to avoid this. When I first started learning photoshop this did not happen?
View 5 Replies View RelatedI would like to adjust old photo made on bromportrait photo paper. Is it possible remove texture of bromportrait photo paper? If yes, how it to do?
The image has such texture:
On Adobe Elements 11 can you rotate an insert to a photo without rotatine entire photo?
View 2 Replies View RelatedHow can I remove a white film on my photos after scanning the photos?
View 1 Replies View RelatedHow do I make a photo sepia and leave an item in the photo the original color?
View 1 Replies View RelatedWhy does my cropped photo look like a broken page inside a version set with the original photo?
View 1 Replies View Relatedin elements 11 how can I extract a person from one photo and insert that person into another photo? I'm totally new to this and my software booklet doesn't say and I'm lost.
View 2 Replies View Relatedhow do i add a person from 1 photo to a group of people in another photo (using elements 9)
View 1 Replies View RelatedI have two photos, shooted probably the same day, by the same photograph in the same place !But the pose is a bit different. first one is in high resolution and in black & white nuance. second one is a small resolution and in full colors.
I wish re-color the black&white photo using exactly the same nuance from the colored one.
can i "copy" all the colors from the color-one to the b&w one ?
i hope there is a quick way to do that with adobe photoshop or with a commercial plugin. Something like : i load the first one (color), i load the second one (b&n), and i press Ok and magic appears !
here are the photos :
the black and white to recolor
[URL]..........
the source color to use
[URL].........
Does photoshop let you cut and paste from one pic to the next, like for example... cut out the head of a person on one photo and paste it on another photo?
View 1 Replies View RelatedI did use the scissors and eraser tool to cutout unwanted background, and now I have an image I want to save and copy to another photo. The problem is that Elements 11 won't let me open up another photo at the same time, or let me copy the selected image to clipboard to paste on a different photo.
View 1 Replies View RelatedI have PSE 11 and I am creating a Christmas theme with various pictures. I have my main photo with 6 layers including a tree and figures which I can move independantly and the background is the checkerboard as the main layers are turned off with only my selections showing. I also have another photo where I have selected part of it and also turned off the main layers leaving a small part with checkered background. When I have the main photo loaded and drag the other one from the photo bin with the move tool, nothing appears on the main picture. I have already dragged the Christmas tree in the same way and that worked. By the way, all the files are .PSD.
View 6 Replies View Relatedtried several times to shift an object from Photo 1 to photo 2:
identified the object in photo 1, e.g by using the lasso
stored it by edit/copy (or strg/c)
opened photo 2
edit/insert (or strg/v)
object appears in photo 2, but without the frame it was supposed to come with - and by which I could enlarge / minimize / shift it....
made a mistake or software error?
I have Photoshop Elements 10 which I work with sparingly. I would like to outline a section of the photo (a face) and somehow select it to be the whole photo - in other words to get rid of all background elements. I can outline the area with lasso, but do not know how to just save that area. When I save, the whole original photo is saved. I also tried the magic extractor, which really worked to make just the face and crop everthing else out, but it has a white background the same size as the original photo, which means it is essentially a reactangle with a face in it. I am trying to just get the face so I can paste it into a document, sort of like when people put heads on fake bodies. This is for a church newsletter. I have done this with my old Picture It software, but that was on my old computer. I think I should be able to do this with all the gadgets Photo Shop has, but I must be missing something.
View 2 Replies View RelatedIn Elements is it possible to copy a selection from one photo into a different photo, i.e copy and paste
View 5 Replies View Relatedhow do i replace a face on one photo to another photo
View 4 Replies View RelatedHow can I blend a photo into another photo. In other words, when I load a picture into elements 9, and I load another picture on top of that one, How do I fade it in where it is seen but but is faded in?
View 1 Replies View RelatedHow to superimpose a photo on another photo?
View 2 Replies View Related