When I open certian drawings, my autocad will freeze up and says autocad application is not responding. this only happens with certian drawings. I have tried restarting my computer, closing all other programes and only having autocad running, opening the file on a diffrent computer, and updating my graphic driver.
I have attached a screen clip of the error message I'm getting.Capture.jpg
I have AutoCAD LT 2011 running on Windows 7 64. I'm using it since long time.
Two weeks ago I started having this problem: as soon as I select any command from the File menu that should open a dialog (Open... Save As... Import...) the program freezes and I see (not responding) in the upper left title bar.
No way to go on. The only solution is to close the program.
Reinstallation from scratch included. System recovery to factory image included. No solution.
I just installed Autodesk Inventor Pro 2014 as a student for my engineering class and I have yet to get it to work properly. Every time I try to open the program, it will open to the main selection page. But the first click I do on the screen causes it to say 'not responding'. I have to close the program and try opening it again. The second time, it does not even get past the opening screen. It freezes and I end up having to log off of my user and log back in. I have the 64-bit version that matches my computer.
View 3 Replies View RelatedSince upgrading the server in our office Autocad 2013 is having trouble opening files. When I attempt to open a file the progress bar gets to about 85%, a "not responding" message comes up for about 15-20 seconds, and then the file opens. Two workstations in the office have AutoCAD 2013, one has 8GB RAM and Windows 7 64 bit, the other has 16GB of RAM and also a WIndows 7 64 bit OS. Neither PC had issues opening files before the new server went in, and neither PC is having problems with any other network program. Is there somewhere within the program or in Autocad's registry entries that might still be pointing to the old server? I have tried the following, Firewall has been turned off, VP has been disabled, repair has been run on the program (through programs and features in the control panel). I have email support through Autocad and sent them an email this morning, but have yet to receive a response.
View 9 Replies View RelatedI'm running Windows 7 64bit on a relatively high end PC: 2.65 gigahertz Intel Core i7 920, 6 GB ram, NVIDIA GeForce GTX 295 [Display adapter] (2x) in SLI, etc...
So when I attempt to open eps file, it simply hangs, and eventually says NOT RESPONDING. As I type this I've been attempting to open a file for over 30 minutes. I've tried rebooting to no avail.
i am using Window Vista, and i'm using my AutoCad 2011 for almost a year and a half now but this past week i cannot open it any any more for some errors;
Problem signature:
Problem Event Name: AppHangB1
Application Name: acad.exe
Application Version: 24.1.208.0
Application Timestamp: 4dbf99e8
Hang Signature: b33a
Hang Type: 0
OS Version: 6.0.6002.2.2.0.768.2
[code]....
I'm getting this error (see attachment) when I try to open an NX file in Inventor 2011. I've downloaded the file from a data transfer site and I can preview the part in the preview window, but it does not open properly. This is the first time this has happened, as I've converted files before with no problem.
View 5 Replies View RelatedWe have used Inventor 2010 with PSP 2011.
- Recently we have upgrade to Inventor 2012.
- Installed pspro_cad_fp_10.0.39.3 update for PSP Server and for PSP Clients.
And now, some drawings we can not open in Inventor 2012. Inventor crashes!
But some drawings we are lucky to be able to open and work with.
Drawings have the same template.
If the drawing is locked (read only) then inventor 2012 can open it without a crash.
If I drag&drop drawing out from PSP onto my Desktop, Inventor 2012 can open drawing without problems.
So we are not able to work with some drawings in Inventor 2012 and PSP 2011.
As the first and quick (and 100%) solution - rollback to Inventor 2010 can cost us about 5 man-days of work. (Because we have done some work in Inventor 2012 allready and will not be able to work with this in Inventor 2010)
Autodesk Inventor Professional 2011
It freezes when I try to open a STEP file, even one I just created.
I have succesfully installed Autodesk Inventor 2011 (Student License) on my Windows 7 (64-bit) operating system without any errors. I can open Inventor 2011, but when I try to open a new or existing file, Inventor suddenly closes and the 'Autodesk Inventor Error Report'-window opens, giving the following error:
Error: Unhandled Exception
When I go to my project folders and try to open any inventor file, the following message appears:
"Inventor.exe needs to register with he operating system and the following programs (Explorer) are running and may
prevent registration from succesfully completing. Autodesk recommends terminating the offending processes to ensure proper registration. Terminate these processes before continuing with the registration?"
If i cick 'Yes', the problem remains.
I've tried reinstalling, following the instructions carefully (installed as administrator), without success. I installed both service packs. I keep having the same problems, while in the past, it has been working perfectly, but I lost it because of hardware problems, which are now resolved.
Technical Info:
OS: Windows 7 64-bit
Processor: Intel(R) Core(TM) i5 CPU M430 @ 2.27GHz
4,00 GB RAM
ATI Mobility Radeon HD 5650
I am working back in forth between school, and my home student version of Maya. I just downloaded Maya 2012, and I can not open a file in 2011 that was created in 2012?? I already opened the option box under OPEN, and selected ignore version. And it still doesn't work. I never had this problem last semester with 2011 files, working with 2010 Maya.
View 6 Replies View RelatedI've found an issue with 3ds Max 2012, when I open/upgrade my 2011 scene, max will crash immediately and every time. I used a 'binary search' approach to figure out what part of my 2011 file/scene was failing to import by exporting half of it, importing it and seeing if it crashed, if so, I'd split that half in half again and repeat until I got down to the offending object. I managed to get down to a single Loft object, which when exported (Save As > Save Selected) just on it's own would cause 2012 to crash on opening it.
It's not a biggy for me as I can just delete the offending object and carry on.
I'm not quite sure why there isn't a try-catch block around the entire import/load file function inside 3ds max, so that if/when max exceptions it won't bring down the entire application? I guess making this a safe transactional operation would be fairly difficult.
I often use photoshop to open binary flat files, either 8 or 16 bit depth. In photoshop if I select open using photoshop raw format, a dialog box pops up asking what the image dimensions are (ie, 512x512), the number of channels (ie 1), the bit depth and the byte order.Is there any way to do this in GIMP, either native or with plugins... I dont think that the UFRaw will work as these files do not come from a camera-- they are images of satellite imagery that are just binary flat files.
View 11 Replies View RelatedIs there any way to put the 2011 topobase and the 2011 ArcGIS plugin into 2012 or 2013? Seems such a shame just to lost all of that functionality.
View 2 Replies View RelatedI'm running AutoCad 2012 in Windows 7 64bit. Notebook is an Asus N53SV, i7 2GHz with 6gb RAM and NVidia Gt540 2gb. The problem is, when i try to Extrude objects, the screen turns into black for a second and a warning says GPU is not responding. Also the notebook has another GPU of Intel within the CPU.
View 2 Replies View RelatedI have a problem with my superelevation. everything is calculated accordingly but when i build my surface from corridor after i have calculated superelevation it does not show the results. Even my cross sections view still show a normal assembly cross section. It happaned on both C3d2011 and ad C3d3013.
View 9 Replies View RelatedWe are seeing lot of performance issues with Inventor 2013 SP2, especially when trying to add assembly into assembly.
I am trying to add an assembly (138MB, 780files) into a newly created assembly (new/blank file).
Sometimes it crashes when creating BOM.
Machine details:
Win7 64Bit OS
8GB Ram
i7 – 2640 @ 2.8GHz Processor
NVIDA Quadro 3000M
After i moved a drawing in this file to another place, autocad 2004 suddenly got slower and even not responding any time i tried any command .With other files, it's still ok.I t seems layer 4 has some problem.URL...
View 1 Replies View RelatedI am writing in the process of writing a AutoCAD/Civil3D plug-in (in VB.Net) product that needs current detects all of the updates (modified, erased , Unmodified, etc) on my own Entities and then only act on these once. So to this end I am maintaining a list of the affect entities and then processing the 'queue' on Document.CommandEnded.
This worked perfectly for me until I realized that the Properties Palette (and probably others) do not actually perform a command so the command end event is never caught. Obviously the queue will be processed on the next command but it looks sloppy that my data is not updated straight away.
I have seen various blog posts and a similar post on here that suggest using DocumentManager.DocumentLockModeWillChange or Editor.EnteringQuiescentState as the event to detect the end of the edit. However I am finding that no matter which of there I use I am unable to apply my Document Lock and this leads to Access Violations no matter what checks I do passed on the EventArgs.
I believe I have all the right Document locks in place, all in Using Statements so they should be disposed of correctly.
when i want to use hatch in autocad 2014 LT, autocad stop working.
wheni chose my settings like pattern and scale everything is just fine.
after i select a field for hatching autocad stop responding.
this happend 9 out of 10 times...
im running service pack 1.
We just installed the Autodesk Package. AutoCAD works fine, Revit seems to work, but we are having the display drive not responding, when we try to start a sketch in Revit.
ATI Radeon HD 3740 graphics card.
Windows 7 - 32 bit
whe i try to draw a pline it accepts the first numerical entry but locks up on the second point. Also when i use this command no matter what layer it is on the line becomes very fat
autoCAD architecture 2013
AutoCAD has been working on my laptop for many months. All of a sudden when I start AutoCAD and do the "open" or "new" command, the software says "not responding". If I set variable "FILEDIA" to 0 it prompts me for the file name. I have tried to repair, uninstall and reinstall the software and it does the same thing.
View 9 Replies View RelatedI´m having a problem with the Inventor 2012 Task Scheduler. I´ve done a couple of migration tasks over the last 2 months, actually quite some big tasks on our Vault Server.
Now I´m getting no more access to the application, it´s either showing a message that the server is busy and not responding or the application starts up and sits for a minute in the task bar and then opens up but still I can´t click any menus or create a report to control the tasks I've done earlier.
But I need to check the last couple of tasks to see which files have been successfully migrated and which are not. I know that I can view the logfiles manually but that still leaves me with no more tasks that I need to run to fix our database and Inventor files.
Let the application run with administrator rights doesn't work either. What else could be done to get the task scheduler back up running?
why the width parameter is only moving one side of the column. I drew both stretch actions following the same steps, then changed the multipliers to .5 and -.5 and only one of them moves. I've redone the block twice so what is going on here?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
Every time you work on large assembly or drawings inventor goes not responding and in the task bar an ADApplicationButton could be seen which is running in the background while inventor hangs.
View 4 Replies View RelatedMy stand-alone PC:
6GB of RAM
WIN7 64bit
AMD x2 240 processor 2.8GHz
After installing all products within Building Design Suite Ultimate 2013 and/or Infrastructure Design Suite Ultimate 2013 I try to open AutoCAD 2013 and get the attached screen. It just grinds and try to open but always shows "not responding". I've read posts that suggest uninstalling and re-installing. I've done this several times. I've used the Microsoft Fix-It engine to completely erase from the PC. I have even just installed the AutoCAD portion and it will not open. Each time I reinstall it asks me to supply all proper credentials, product code, etc. It shows green check marks so I know my codes are correct.
I've tried opening other programs and the only successful one is Revit. Am I to point the start-up of the programs to the licenses or something.
dimstyle manager has just stopped responding, can't see why
when I select it, the panel drops down, when i select modify it freezes
can only get out of it by escape button
AutoCAD 2010 on windows Sony Z ssd etc.
I have a problem that the software is not responding and freezing when creating new drawing or opening another one.
I have windows 7 64 bit Operating system installed on workstation Dell Machine
I look to a lot of discussion and I tried the mentioned ways but still same issue
FYI, this software was working fine with windows XP machine.
Ok, so I just got a new computer after having to deal with "Not Responding" from my old computer all the time just to find out I still have this issue with a brand new computer. It's really frustrating because it will do this all the time with small assemblies, big assemblies, parts, it doesn't matter. It also can be at any random moment from rotating the model to adding a constraint to saving. It doesn't seem to have any real pattern it just seems to happen all the time.
View 9 Replies View RelatedI have been trying to install and run a student version of AutoCAD 2013 on my computer and it keeps crashing/freezing at the first startup after installation, and never works after that. Installation is all fine and smooth. Starting the program however takes a few seconds to load the plugins then it hangs at the loading screen forever. I've tried turning off the loading screen but the program itself just crashes and appears to be "Not Responding" anyway. I've tried uninstalling all Autodesk products and only install AutoCAD 2013 but it's still not working.
As for my computer, it runs Autodesk Inventor 2014 very well. Specification-wise:
Windows 7 Professional 64-bit
Intel Xeon E31220 3.10GHz
RAM: 16GB
NVIDIA Quadro 600