dimstyle manager has just stopped responding, can't see why
when I select it, the panel drops down, when i select modify it freezes
can only get out of it by escape button
AutoCAD 2010 on windows Sony Z ssd etc.
error message:"Display driver stopped responding and has recovered" Display driver Intel Graphics Accelerator Drivers for Windows 7(R) stopped responding and has successfully recovered.
This happens when I copy and paste a group of blocks. The screen goes black for 2-3 seocnds then finally recovers.
I have been running Photoshop CS2 on my computer for about a month now, the full version, activated and registered. For some reason whenever I open a file, Photoshop stops responding; all it does is make a sound ("dun") sound whenever I click on the Photoshop window. The only button that works is the minimize button; I have to use Windows Task Manager to close the program.
Does anyone have any ideas what's going on and how I can fix this?
for no explicable reason PS3 has stopped responding to a variety of commands and particularly to 'print'. I have tried uninstalling/reinstalling
both photoshop and the Epson printer software - all to no avail. Could the problem lie with the Operating system which is Windows Vista Home Premium and if so how should I best proceed ?
I have a larger Revit file that has linked in models (mutiple buildings - each bldg is its own model)
I need a COMPLETE file for Navisworks...
When I go to Revit, and try to export to NWC file, it starts the export process... about 40 minutes in (YES, 40 mins, it just loads and loads and loads) I will get an error message that "Revit has stopped responding"
This is now the 3rd time today I have tried this with no success. I also tried loading into Navisworks directly (Nav 2013) but will not read the files properly and bring them in together.
I know Revit 2012 is capable of exporting linked models to a single NWC file... however my computer does't seem to like it. I even just sat and read a book and did not internet serach or running any other programs at the time....
I NEED THIS TO WORK
Exporting each individual Revit model to NWC and recompling them in Navisworks IS NOT AN OPTION.
I need to export this large linked Revit file as ONE nwc file.. I know it CAN be done...
My laptop is fairly newer and has like 8gb of ram, so that shouldn't be the problem, is it?
I recently upgraded my laptop to Windows 8.1 and now from time to time, I am receiving the error above on the right side of the screen and my photoshop files won't open. Instead it just freezes and becomes unresponsive so I have to close Photoshop from going to 'End Task'. I am using CS6.
View 5 Replies View RelatedWhat I've done differently is applied a few effects to clips, such as contrast and exposure, and then nested the clips. Then I've dragged these sequences together on the timeline and trimmed and edited. The 13 minute video plays well for about 9 minutes, then it starts flickering, alternating with black and white screens, then in the last minute it crashes. I get the message "Display Drive Stopped Responding and Has Recovered." I've begun replacing some of the nested sequences with the original imported assets, but still the same end result.
I'm working with 1920 x 1080 assests at 23.97 fps. I've worked with these before, no problem (though I haven't had to add so many effects before).
I'm working on an Intel Core i7-3770 GPU @ 3.40 GHz 10 GB.
Adobe Bridge (CS6) Stopped Working & Application Manager Fails No Matter What I do.
I have uninsalled, ran the cleaner, installed, and Bridge will not open, Application manager will not run.
Win 7 x64 Pro
CS6
i created a method that creates a "DIMSTYLE":
private ObjectId CreateDimstyle() { DimStyleTable dimStyleTable = (DimStyleTable)transaction.GetObject(database.DimStyleTableId, OpenMode.ForRead); DimStyleTableRecord dimStyleTableRecord = null; if (dimStyleTable.Has(configuration.EXTDIMStyleName) == false) { if (dimStyleTable.IsWriteEnabled == false) dimStyleTable.UpgradeOpen(); dimStyleTableRecord = new DimStyleTableRecord(); dimStyleTableRecord.Name = configuration.EXTDIMStyleName; dimStyleTable.Add(dimStyleTableRecord); transaction.AddNewlyCreatedDBObject(dimStyleTableRecord, true); } else { dimStyleTableRecord = transaction.GetObject(dimStyleTable[configuration.EXTDIMStyleName], OpenMode.ForWrite) as DimStyleTableRecord; } dimStyleTableRecord.Dimscale = configuration.EXTDIMScale; dimStyleTableRecord.Dimtdec = configuration.EXTDIMPrecision; dimStyleTableRecord.Dimlunit =
[code]...
Works well. But I think it would be more correct to put the text style in the style of the dimension. As in AutoCad.
I was looking at the properties of "DIMSTYLE."
[URL]
But found no one to set "TEXTSTYLE" pattern to my "DIMSTYLE".How can I do this?
The only way to change dimensions that I know of is DIMSTYLE. I know how to make new dimensions styles and such, but I am having trouble setting the dimension styles by LAYER.
I currently have a pretty good solution but it would be better if it was automatically set by layer. I just qselect a layer, go to the properties, and change it all at the same time in the end.
Is this possible? Might there be a better way? If you are wondering why I am mixing dimensions, it's because I send my drawings to several different people and companies, and they only need to work with certain aspects of my drawings.
I am trying to find out what the current DimStyle of the drawing.
I have iterated through all DimStyle but can’t find any way of finding the current Style.
For Each DsrID In DST Dim R As DimStyleTableRecord = CType(DsrID.GetObject(OpenMode.ForRead), DBObject) Debug.Print(R.Name)Next
In a drawing with multiple dimstyles, my dimscale always goes back to (1) when switching from one dimstyle to another. Even after I set the dimscale for "dimstyle 1" and I then set and use "dimstyle 2", when I go back to "dimstyle 1" I have to set the dimscale again.
How do I set it to where I can set the dimscale once for each dimstyle. All dimstyles have the same dimscale.
i've run into this quite a few times where i would open a drawing and there would be an override on the current dimstyle...i would clear the override and save the drawing...another day i would open the file and the override is created again...
i greatly suspect that the annotation scale is the culprit...when i check the dimstyle override the scale for dimension under the fittab is set to a number reflecting the scale...ie if the annotation is 1"=1'-0" it will be 12...if it's 1/4"=1'-0" it will be 48 etc...
i also noticed that an override is created after editing a dynamic block...
in addition to the above, the override is not created if the anotative scale is the same as the "fit" number...
Can a DIMSTYLE with annotative box checked be used in Layout or Paper Space? If so, are dimension at risk of losing their associative to part being dimension or be subject to change their Scale Factor when moving model or a different user (machine) opens the file?
View 2 Replies View RelatedRecently, I switched companies. I am supposed to insert their sheet template into model space at 3/4" = 1' which I have done. There are parts that need to be detailed. On the detailed part the dimensions all come up fine (after altering the scale/dimstyle) but when I try adding dimensions to the original drawing, instead of getting the 3'-0" measurement I should get, somehow I get the measurement for 48'-0".
View 3 Replies View RelatedI have a set of dimensions, which for the purposes of the 1/2"=1'-0" viewport, are set to a scale of 24x. If I go to adjust some, not all, just some of the dimensions, it kicks it to 576x; this happens if I adjust the placement/grips of the dimension, or even change the precision from 1/32" to 1/8". In the DIMSTYLE dialogue box, I have everything set to the precision and scale I need; I UPDATE all dim's in the layout, and some, not all, still stay at 576x and 1/32".
One "workaround" is to just get all the dim's in place and MATCH them all to the one dimension that is and stays at 24x & 1/8" prec; however, this is a hassle given how many dim's are on this struc. sheet. This is made a little easier using LAYISO, but I want it done correctly as I move forward and not have to keep double-checking every d*** dim before plotting or sending the file to someone else.
Is there some setting, presumably that keeps overriding all of my overrides and settings adjustments? I don't understand how I can create a new dim, and it follows my settings like normal, but I go to adjust it, and it's 576x|1/32", which I cannot track to any setting within DIMSTYLE.
ACAD '10
using qleader and it defaults to subdimstyle "leader" how do change it?
View 2 Replies View RelatedI'm sure this has been addressed in these hollowed posts but a search didn't turn it up. I have a dimstyle with primary units format set to "Fractional" and would like the inch (") marks to come in. I know i can add the inch mark as the suffix, but is there a better way? Archetectural and Engineering formats both include the inch marks and this makes sense to me. But if "fractional" format is not inches, then what would it be?
View 9 Replies View RelatedChanges all dimensions, balloons, ect (define more if you want) to current object default in active standard.
Sub ChangeDimStyle()'J.Kriek 2012 Dim oApp As Application Dim oIdw As DrawingDocument Dim oDim As DrawingDimension Dim oBalloon As Balloon Dim oDimStyle As DrawingStandardStyle Dim oSheet As Sheet Set oApp = ThisApplication
[Code]....
I am having problems getting the CAD Standards Checker - Dimstyle plug-in to correctly recognize Annotative dimstyles.
I should point out that this error occurs in both AutoCAD 2011, and AutoCAD 2012 (which these screen shots are from)
My DWS file is correctly configured to have the dimstyle set to be annotative:
Then, I save this file to be a DWT file for our company's standard drawing template.
However, when I configure standards and add the DWS file to the DWT file ...even though the files are identical... I run the standards checker and get this!
Is there something I'm doing wrong? Or is the CAD Standards Checker not properly recongizing the Annotative Dimension Style?
System specs:
OS: Windows 7 Professional 64bit - SP1CPU: AMD Phenom II X6 1100T @ 3.51GHzMem: 16GB DDR3HD: 64GB SSD
I've been working on a lisp to set up basic settings such as text styles, dim styles, discipline specific layers and things of that nature.
I have a prompt to ask for a discipline designator as a string. I want to have an If statement or a conditional to read that string and check for a "C" if it finds it I want to have it set up a dimstyle to decimal feet ect and if not do it as architectural units.
This is just a test lisp that I'd like to add to the main one listed above...
(defun c:test(/ disc dsnm dsna)
(setq disc (getstring "
Discipline (G,C,S,M,E,CP): ")) ;Prompt for Discipline
(setq ds (getint "
Dimscale Factor: ")) ;Prompt for Dimscale
[code].......
I need ot append events when the dimstyle is change using the AutoCAD dimstyle popup list, but don't know which reactoer to use. I tried with Comman begin and end, and Sysvawill change and changed, but they don't detect the dimstyle changes.
View 2 Replies View RelatedI want to set the break size in all of my dimstyles but I can't find a system variable for it. know what it is or how else to set it?
View 2 Replies View RelatedHow to change the dim text color in current dimstyle with a lisp routine? I want to modify current dimstyle instead of override current dimstyle, so it can change all existing dim text color under the current dimstyle.
View 9 Replies View RelatedWhenever I insert a block into my drawing from the Tool Palette, Autocad creates a Text Style and Dimension Style,both named Annotative. This happens on any drawing, with any block.
I can purge them after the block has been inserted. They are NOT nested in the blocks. I have tried recreated the tool. Nothing seems to be working.
I've set my dimstyle in paper space. but any dimensions. How do i get them equal since i have some dimensions in model space and some in paper space.
View 2 Replies View RelatedLightroom 3.3 just stopped working error says lightroom has stopped working and shuts down. installed photoshop CS3 is that the problem?
View 2 Replies View RelatedI'm running AutoCad 2012 in Windows 7 64bit. Notebook is an Asus N53SV, i7 2GHz with 6gb RAM and NVidia Gt540 2gb. The problem is, when i try to Extrude objects, the screen turns into black for a second and a warning says GPU is not responding. Also the notebook has another GPU of Intel within the CPU.
View 2 Replies View RelatedI have a problem with my superelevation. everything is calculated accordingly but when i build my surface from corridor after i have calculated superelevation it does not show the results. Even my cross sections view still show a normal assembly cross section. It happaned on both C3d2011 and ad C3d3013.
View 9 Replies View RelatedWhen I open certian drawings, my autocad will freeze up and says autocad application is not responding. this only happens with certian drawings. I have tried restarting my computer, closing all other programes and only having autocad running, opening the file on a diffrent computer, and updating my graphic driver.
I have attached a screen clip of the error message I'm getting.Capture.jpg
We are seeing lot of performance issues with Inventor 2013 SP2, especially when trying to add assembly into assembly.
I am trying to add an assembly (138MB, 780files) into a newly created assembly (new/blank file).
Sometimes it crashes when creating BOM.
Machine details:
Win7 64Bit OS
8GB Ram
i7 – 2640 @ 2.8GHz Processor
NVIDA Quadro 3000M