AutoCad :: How To Prevent Dimstyle Overrides
Aug 15, 2007
i've run into this quite a few times where i would open a drawing and there would be an override on the current dimstyle...i would clear the override and save the drawing...another day i would open the file and the override is created again...
i greatly suspect that the annotation scale is the culprit...when i check the dimstyle override the scale for dimension under the fittab is set to a number reflecting the scale...ie if the annotation is 1"=1'-0" it will be 12...if it's 1/4"=1'-0" it will be 48 etc...
i also noticed that an override is created after editing a dynamic block...
in addition to the above, the override is not created if the anotative scale is the same as the "fit" number...
View 9 Replies
ADVERTISEMENT
Sep 2, 2011
i created a method that creates a "DIMSTYLE":
private ObjectId CreateDimstyle() { DimStyleTable dimStyleTable = (DimStyleTable)transaction.GetObject(database.DimStyleTableId, OpenMode.ForRead); DimStyleTableRecord dimStyleTableRecord = null; if (dimStyleTable.Has(configuration.EXTDIMStyleName) == false) { if (dimStyleTable.IsWriteEnabled == false) dimStyleTable.UpgradeOpen(); dimStyleTableRecord = new DimStyleTableRecord(); dimStyleTableRecord.Name = configuration.EXTDIMStyleName; dimStyleTable.Add(dimStyleTableRecord); transaction.AddNewlyCreatedDBObject(dimStyleTableRecord, true); } else { dimStyleTableRecord = transaction.GetObject(dimStyleTable[configuration.EXTDIMStyleName], OpenMode.ForWrite) as DimStyleTableRecord; } dimStyleTableRecord.Dimscale = configuration.EXTDIMScale; dimStyleTableRecord.Dimtdec = configuration.EXTDIMPrecision; dimStyleTableRecord.Dimlunit =
[code]...
Works well. But I think it would be more correct to put the text style in the style of the dimension. As in AutoCad.
I was looking at the properties of "DIMSTYLE."
[URL]
But found no one to set "TEXTSTYLE" pattern to my "DIMSTYLE".How can I do this?
View 4 Replies
View Related
Jul 5, 2012
The only way to change dimensions that I know of is DIMSTYLE. I know how to make new dimensions styles and such, but I am having trouble setting the dimension styles by LAYER.
I currently have a pretty good solution but it would be better if it was automatically set by layer. I just qselect a layer, go to the properties, and change it all at the same time in the end.
Is this possible? Might there be a better way? If you are wondering why I am mixing dimensions, it's because I send my drawings to several different people and companies, and they only need to work with certain aspects of my drawings.
View 9 Replies
View Related
Aug 14, 2013
I am trying to find out what the current DimStyle of the drawing.
I have iterated through all DimStyle but can’t find any way of finding the current Style.
For Each DsrID In DST Dim R As DimStyleTableRecord = CType(DsrID.GetObject(OpenMode.ForRead), DBObject) Debug.Print(R.Name)Next
View 5 Replies
View Related
Mar 29, 2013
In a drawing with multiple dimstyles, my dimscale always goes back to (1) when switching from one dimstyle to another. Even after I set the dimscale for "dimstyle 1" and I then set and use "dimstyle 2", when I go back to "dimstyle 1" I have to set the dimscale again.
How do I set it to where I can set the dimscale once for each dimstyle. All dimstyles have the same dimscale.
View 2 Replies
View Related
Feb 3, 2012
dimstyle manager has just stopped responding, can't see why
when I select it, the panel drops down, when i select modify it freezes
can only get out of it by escape button
AutoCAD 2010 on windows Sony Z ssd etc.
View 7 Replies
View Related
Jan 29, 2013
Can a DIMSTYLE with annotative box checked be used in Layout or Paper Space? If so, are dimension at risk of losing their associative to part being dimension or be subject to change their Scale Factor when moving model or a different user (machine) opens the file?
View 2 Replies
View Related
May 23, 2013
Recently, I switched companies. I am supposed to insert their sheet template into model space at 3/4" = 1' which I have done. There are parts that need to be detailed. On the detailed part the dimensions all come up fine (after altering the scale/dimstyle) but when I try adding dimensions to the original drawing, instead of getting the 3'-0" measurement I should get, somehow I get the measurement for 48'-0".
View 3 Replies
View Related
Jul 17, 2013
I have a set of dimensions, which for the purposes of the 1/2"=1'-0" viewport, are set to a scale of 24x. If I go to adjust some, not all, just some of the dimensions, it kicks it to 576x; this happens if I adjust the placement/grips of the dimension, or even change the precision from 1/32" to 1/8". In the DIMSTYLE dialogue box, I have everything set to the precision and scale I need; I UPDATE all dim's in the layout, and some, not all, still stay at 576x and 1/32".
One "workaround" is to just get all the dim's in place and MATCH them all to the one dimension that is and stays at 24x & 1/8" prec; however, this is a hassle given how many dim's are on this struc. sheet. This is made a little easier using LAYISO, but I want it done correctly as I move forward and not have to keep double-checking every d*** dim before plotting or sending the file to someone else.
Is there some setting, presumably that keeps overriding all of my overrides and settings adjustments? I don't understand how I can create a new dim, and it follows my settings like normal, but I go to adjust it, and it's 576x|1/32", which I cannot track to any setting within DIMSTYLE.
ACAD '10
View 0 Replies
View Related
Nov 14, 2011
using qleader and it defaults to subdimstyle "leader" how do change it?
View 2 Replies
View Related
May 15, 2012
I'm sure this has been addressed in these hollowed posts but a search didn't turn it up. I have a dimstyle with primary units format set to "Fractional" and would like the inch (") marks to come in. I know i can add the inch mark as the suffix, but is there a better way? Archetectural and Engineering formats both include the inch marks and this makes sense to me. But if "fractional" format is not inches, then what would it be?
View 9 Replies
View Related
Jun 20, 2012
Changes all dimensions, balloons, ect (define more if you want) to current object default in active standard.
Sub ChangeDimStyle()'J.Kriek 2012 Dim oApp As Application Dim oIdw As DrawingDocument Dim oDim As DrawingDimension Dim oBalloon As Balloon Dim oDimStyle As DrawingStandardStyle Dim oSheet As Sheet Set oApp = ThisApplication
[Code]....
View 9 Replies
View Related
May 19, 2011
I am having problems getting the CAD Standards Checker - Dimstyle plug-in to correctly recognize Annotative dimstyles.
I should point out that this error occurs in both AutoCAD 2011, and AutoCAD 2012 (which these screen shots are from)
My DWS file is correctly configured to have the dimstyle set to be annotative:
Then, I save this file to be a DWT file for our company's standard drawing template.
However, when I configure standards and add the DWS file to the DWT file ...even though the files are identical... I run the standards checker and get this!
Is there something I'm doing wrong? Or is the CAD Standards Checker not properly recongizing the Annotative Dimension Style?
System specs:
OS: Windows 7 Professional 64bit - SP1CPU: AMD Phenom II X6 1100T @ 3.51GHzMem: 16GB DDR3HD: 64GB SSD
View 5 Replies
View Related
Nov 18, 2011
I've been working on a lisp to set up basic settings such as text styles, dim styles, discipline specific layers and things of that nature.
I have a prompt to ask for a discipline designator as a string. I want to have an If statement or a conditional to read that string and check for a "C" if it finds it I want to have it set up a dimstyle to decimal feet ect and if not do it as architectural units.
This is just a test lisp that I'd like to add to the main one listed above...
(defun c:test(/ disc dsnm dsna)
(setq disc (getstring "
Discipline (G,C,S,M,E,CP): ")) ;Prompt for Discipline
(setq ds (getint "
Dimscale Factor: ")) ;Prompt for Dimscale
[code].......
View 6 Replies
View Related
Jun 24, 2013
So I'm having an issue with our sheetset override. I created a override template for a 30x42 sheet size. I created a 30x42 box in paper space and put it on a defpoints layer. In the sheet properties, I have the margins zeroed out. The margins are drawn into the title block. The plot properties are set 1:1 and to extents.
When I plot a sheetset using the above override, the right side of the titleblock gets cut off, around 1/4" to 1/2" at the most. In plot preview, it does not show the edge getting cut off. However, in the plot window, where it visually shows the sheet and if you are exceeding the sheet limits or not, the red box is displayed.
However, when I manually plot the drawing without using the sheetset manager, it plots the sheet fine, but then adds 1/2" on the left side! I'm using the same plot settings as the sheetset override is. Now, when I "publish to plotter" in the sheetset manager, it adds an inch to the left side. In short, using all the same plot settings:
Manual plot = 42-1/2"x30
"Plublish to plotter" using sheetset manager = 43x30.
Using sheetset override = cuts 1/2" off right side.
View 5 Replies
View Related
May 17, 2012
I need ot append events when the dimstyle is change using the AutoCAD dimstyle popup list, but don't know which reactoer to use. I tried with Comman begin and end, and Sysvawill change and changed, but they don't detect the dimstyle changes.
View 2 Replies
View Related
Aug 28, 2009
I want to set the break size in all of my dimstyles but I can't find a system variable for it. know what it is or how else to set it?
View 2 Replies
View Related
Sep 16, 2005
Each time I open a drawing, on my arrow dimension I get a style override which is always scaled at 96. Even if I delete the style override, when I close the drawing and open it again, it's back. It's always on the "arrow" dimension, never any other dimensions. I don't know why it's been doing this, it just started one day out of nowhere. Is there a way I can get rid of it? I'm using AutoCAD 2005.
View 9 Replies
View Related
Oct 3, 2013
I have a layout tab that has a page setup set as current. Page setup name is "Letter_Portrait"
"Letter_Portrait" is set to print on letter-sized paper, portrait orientation, 1:1 scale, to a network printer. Printing this layout to the printer prints perfectly.
When I try to export to pdf using the EXPORTPDF command, the resulting pdf file that is created is clipped. I then try same command, only this time use "Page Setup Override" and change the "Plot Scale" option to "Fit to Paper". I would think that this would solve the clipped pdf file AutoCAD generates. But instead I get the same clipped image.
The only way I have found to get around this is to change the layout's Page Setup scale from 1:1 to "Fit to paper". Shouldn't the PDF Page Setup Override accomplish this without having to change the layout's Page Setup?
View 7 Replies
View Related
Jun 27, 2012
How to change the dim text color in current dimstyle with a lisp routine? I want to modify current dimstyle instead of override current dimstyle, so it can change all existing dim text color under the current dimstyle.
View 9 Replies
View Related
Nov 5, 2013
Whenever I insert a block into my drawing from the Tool Palette, Autocad creates a Text Style and Dimension Style,both named Annotative. This happens on any drawing, with any block.
I can purge them after the block has been inserted. They are NOT nested in the blocks. I have tried recreated the tool. Nothing seems to be working.
View 4 Replies
View Related
Jul 16, 2013
I am have an issue with the shift overrides not working when there is an image under where i am working.
In the same drawing for example i can use shift to either select more than one point in a polyline, or to change between trim and extend or to fillet with a radius or to a point.
but when i try to do this with an image in the background it doesn't work. I need the image as i am tracing shapes.
View 5 Replies
View Related
Jan 24, 2013
I have some drawings with lots of dimensions. Is there a way to check if any have been over ridden or a global way to set all dimensions to model value?
View 2 Replies
View Related
Sep 3, 2012
I have a drawings with multiple layouts. In the first layout the whole drawing looks exactly like in does in model space, with reference to the colours. In the other layout the drawings all change colour to what they will look like when printed.
In these other layouts if I copy a viewport the colour returns, but if I change to another layout and back again then it reverts to what the original was. I have attached an image.
The copied vp is the one on top.
Like I said proably a quick fix but I dont know where to start. Is it something to do with Vp colour overrides?
View 5 Replies
View Related
Feb 13, 2013
How to use keyboard shortcut to allow for a temporary override of my "Nearest" OSNAP. I often find myself pulling leaders from splines and/or circles and need the "Nearest" OSNAP active.
I was in CUI and saw the temp override shortcut key was setup but inactive as it has no ties to any keys. I also saw others setup with shortcuts keys and decided to give them a demo. While in a line command (for example) i held 'SHIFT + C' to trigger the temp override of "Center." It didn't seem to work. Dynamic input popped up as if i was entering "C."
I want 'SHIFT + N' to be temp override for "Nearest" OSNAP.As a side note, i was able to set up ACAD to zoom extents and close dwg simultaneously with 'CTRL + W' without any hiccups.
View 9 Replies
View Related
Aug 31, 2012
Is there a quick way of finding all dimensions with a text override.
I am dimensioning screwed pipe, and want the cut length on the drawing, e.g. a pipe that is 3000mm between center of fitting should show a dimension of 2970. After doing this on a few hundred dimensions I want to check that I have not left any out. i therefore want to check if there is any way to check that they are all overridden.
View 2 Replies
View Related
Jul 18, 2013
I make an idw template at home and at work i get this message that says style library will override the listed styles, and enables me to choose if i want to impose the style library or the styles in the template.
I want to impose the styles in the template and the message says that in order to achieve that i have to delete the styles.
Which styles to delete and how?
When i use the purge styles command it's empty.
I understand that duplicate names of styles make the problem, but at home i checked 2 of the styles and found them the same as at work, but maybe i don't remember all the changes.
Is the solution simply to make new styles with new names?
View 9 Replies
View Related
Aug 20, 2012
No documentation : remove all property overrides
If I insert a table with our standard table style is is to big, so made a smaller text style, made a new table style with the new text style in it.
And if I insert a new table with the new style its still big...
But... select the table, right click, Remove All Property Overrides... And the text style is OK, only the row height is wrong, so in the table bar - unlocked, select the table again and move the right little triangle up until the rows don't get smaller.
View 1 Replies
View Related
Nov 13, 2013
I create MFC enclosures with various gasses. These enclosures can be quite large with three or more gas types. I create view representations with gas name and color the flow path for each gas in the named view. Is there a way to turn on all the colored overrides in one view to see all the various colors at once? I thought MASTER would show all colors but it does not. If not the only way would be to create the view of all gasses on and re-do all the work from all the prevous views.
View 2 Replies
View Related
Apr 29, 2011
I want to run one wall just a few inches past another. If I override the Cleanup Radius at the appropriate ends of the walls, setting the radii to a small number (1/2"), shouldn't that allow one wall to be run a couple inches past the other? The attached image shows the end of Wall 2 pulled as close to Wall 1 as I can get it. Both walls have the Cleanup Radius override at 1/2". If I nudge the end of Wall 2 down any further, it jumps down to form a corner with Wall 1.
View 1 Replies
View Related
Feb 21, 2013
I have an XREF that I want the lines to appear has color 253.
I go into layer properties and override the layer colors to 253. Some of the lines in the XREF change to 253. Other lines don't because they are not "By Layer" in the xref file.
Is there a setting in autocad that will override these lines that are not "by-layer"?
View 5 Replies
View Related
