I'm running AutoCad 2012 in Windows 7 64bit. Notebook is an Asus N53SV, i7 2GHz with 6gb RAM and NVidia Gt540 2gb. The problem is, when i try to Extrude objects, the screen turns into black for a second and a warning says GPU is not responding. Also the notebook has another GPU of Intel within the CPU.
View 2 RepliesAutoCAD has been working on my laptop for many months. All of a sudden when I start AutoCAD and do the "open" or "new" command, the software says "not responding". If I set variable "FILEDIA" to 0 it prompts me for the file name. I have tried to repair, uninstall and reinstall the software and it does the same thing.
View 9 Replies View RelatedI have a problem that the software is not responding and freezing when creating new drawing or opening another one.
I have windows 7 64 bit Operating system installed on workstation Dell Machine
I look to a lot of discussion and I tried the mentioned ways but still same issue
FYI, this software was working fine with windows XP machine.
I have just loaded the student version of AutoCAD 2012 onto my brand new HP Pavilion Notebook which has 8 GB of memory - Processor AMD A8-3530MX with HP Graphics 1.90 GHz - running Windows 7 Home Premium 64-bit.
I have created a file in Adobe Illustrator which I converted to a vector image and exported it to AutoCAD. I have loaded the image and have cleaned it up. I am now trying to re-scale it and my session keeps freezing. When I look at the task manager I see that the program is not responding. I have ended the task many times now!
I have AutoCAD 2012 on a Win 7 64bit laptop. Ive had it on here for over a year and never had this issue till today. My AutoCAD loads up fine and loads up the default Drawing1 file. However after waiting a few seconds and going to click File, it comes up with Not Responding on the top. I wait patiently for several minutes and it does not recover. Not quite sure what went wrong . My desktop has the same issue. There is a possibility of it being caused by CCleaner after using it to fix errors and it messed with something in the resgistry while doing so but not sure.
View 9 Replies View RelatedHaven't figured out the trigger yet but after working in INV for a little while the "Application Menu" (used to be the File menu) does not respond to clicking on any buttons..Flyouts work but when you press the actual button nothing happens..
All other ribbon bar buttons function properly. Simply closing INV and restarting fixes the problem temporarily.
keep getting program not responding message when I try to open a drawing.
View 9 Replies View RelatedI have a problem with my superelevation. everything is calculated accordingly but when i build my surface from corridor after i have calculated superelevation it does not show the results. Even my cross sections view still show a normal assembly cross section. It happaned on both C3d2011 and ad C3d3013.
View 9 Replies View RelatedWhen I open certian drawings, my autocad will freeze up and says autocad application is not responding. this only happens with certian drawings. I have tried restarting my computer, closing all other programes and only having autocad running, opening the file on a diffrent computer, and updating my graphic driver.
I have attached a screen clip of the error message I'm getting.Capture.jpg
We are seeing lot of performance issues with Inventor 2013 SP2, especially when trying to add assembly into assembly.
I am trying to add an assembly (138MB, 780files) into a newly created assembly (new/blank file).
Sometimes it crashes when creating BOM.
Machine details:
Win7 64Bit OS
8GB Ram
i7 – 2640 @ 2.8GHz Processor
NVIDA Quadro 3000M
After i moved a drawing in this file to another place, autocad 2004 suddenly got slower and even not responding any time i tried any command .With other files, it's still ok.I t seems layer 4 has some problem.URL...
View 1 Replies View RelatedI am writing in the process of writing a AutoCAD/Civil3D plug-in (in VB.Net) product that needs current detects all of the updates (modified, erased , Unmodified, etc) on my own Entities and then only act on these once. So to this end I am maintaining a list of the affect entities and then processing the 'queue' on Document.CommandEnded.
This worked perfectly for me until I realized that the Properties Palette (and probably others) do not actually perform a command so the command end event is never caught. Obviously the queue will be processed on the next command but it looks sloppy that my data is not updated straight away.
I have seen various blog posts and a similar post on here that suggest using DocumentManager.DocumentLockModeWillChange or Editor.EnteringQuiescentState as the event to detect the end of the edit. However I am finding that no matter which of there I use I am unable to apply my Document Lock and this leads to Access Violations no matter what checks I do passed on the EventArgs.
I believe I have all the right Document locks in place, all in Using Statements so they should be disposed of correctly.
when i want to use hatch in autocad 2014 LT, autocad stop working.
wheni chose my settings like pattern and scale everything is just fine.
after i select a field for hatching autocad stop responding.
this happend 9 out of 10 times...
im running service pack 1.
We just installed the Autodesk Package. AutoCAD works fine, Revit seems to work, but we are having the display drive not responding, when we try to start a sketch in Revit.
ATI Radeon HD 3740 graphics card.
Windows 7 - 32 bit
I have AutoCAD LT 2011 running on Windows 7 64. I'm using it since long time.
Two weeks ago I started having this problem: as soon as I select any command from the File menu that should open a dialog (Open... Save As... Import...) the program freezes and I see (not responding) in the upper left title bar.
No way to go on. The only solution is to close the program.
Reinstallation from scratch included. System recovery to factory image included. No solution.
whe i try to draw a pline it accepts the first numerical entry but locks up on the second point. Also when i use this command no matter what layer it is on the line becomes very fat
autoCAD architecture 2013
I´m having a problem with the Inventor 2012 Task Scheduler. I´ve done a couple of migration tasks over the last 2 months, actually quite some big tasks on our Vault Server.
Now I´m getting no more access to the application, it´s either showing a message that the server is busy and not responding or the application starts up and sits for a minute in the task bar and then opens up but still I can´t click any menus or create a report to control the tasks I've done earlier.
But I need to check the last couple of tasks to see which files have been successfully migrated and which are not. I know that I can view the logfiles manually but that still leaves me with no more tasks that I need to run to fix our database and Inventor files.
Let the application run with administrator rights doesn't work either. What else could be done to get the task scheduler back up running?
why the width parameter is only moving one side of the column. I drew both stretch actions following the same steps, then changed the multipliers to .5 and -.5 and only one of them moves. I've redone the block twice so what is going on here?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
Every time you work on large assembly or drawings inventor goes not responding and in the task bar an ADApplicationButton could be seen which is running in the background while inventor hangs.
View 4 Replies View RelatedMy stand-alone PC:
6GB of RAM
WIN7 64bit
AMD x2 240 processor 2.8GHz
After installing all products within Building Design Suite Ultimate 2013 and/or Infrastructure Design Suite Ultimate 2013 I try to open AutoCAD 2013 and get the attached screen. It just grinds and try to open but always shows "not responding". I've read posts that suggest uninstalling and re-installing. I've done this several times. I've used the Microsoft Fix-It engine to completely erase from the PC. I have even just installed the AutoCAD portion and it will not open. Each time I reinstall it asks me to supply all proper credentials, product code, etc. It shows green check marks so I know my codes are correct.
I've tried opening other programs and the only successful one is Revit. Am I to point the start-up of the programs to the licenses or something.
dimstyle manager has just stopped responding, can't see why
when I select it, the panel drops down, when i select modify it freezes
can only get out of it by escape button
AutoCAD 2010 on windows Sony Z ssd etc.
Ok, so I just got a new computer after having to deal with "Not Responding" from my old computer all the time just to find out I still have this issue with a brand new computer. It's really frustrating because it will do this all the time with small assemblies, big assemblies, parts, it doesn't matter. It also can be at any random moment from rotating the model to adding a constraint to saving. It doesn't seem to have any real pattern it just seems to happen all the time.
View 9 Replies View RelatedI just installed Autodesk Inventor Pro 2014 as a student for my engineering class and I have yet to get it to work properly. Every time I try to open the program, it will open to the main selection page. But the first click I do on the screen causes it to say 'not responding'. I have to close the program and try opening it again. The second time, it does not even get past the opening screen. It freezes and I end up having to log off of my user and log back in. I have the 64-bit version that matches my computer.
View 3 Replies View RelatedI have been trying to install and run a student version of AutoCAD 2013 on my computer and it keeps crashing/freezing at the first startup after installation, and never works after that. Installation is all fine and smooth. Starting the program however takes a few seconds to load the plugins then it hangs at the loading screen forever. I've tried turning off the loading screen but the program itself just crashes and appears to be "Not Responding" anyway. I've tried uninstalling all Autodesk products and only install AutoCAD 2013 but it's still not working.
As for my computer, it runs Autodesk Inventor 2014 very well. Specification-wise:
Windows 7 Professional 64-bit
Intel Xeon E31220 3.10GHz
RAM: 16GB
NVIDIA Quadro 600
I have looked at all the discussions relevant to this problem and can't find an answer. I am doing the TOOLING TUTORIALS for Inventor 2014. My O/S is Windows 7, and my Graphics card is a Gforce GTX 570, so I know my equipment is up to doing these tutorials. But, every time I click OK to start the pattern in the section "Patterning Mold Assembly Components", I get a message saying "Pattern (not responding)". I have tried and retried at least a dozen times to be sure I followed all instructions to the letter.
View 4 Replies View RelatedSince upgrading the server in our office Autocad 2013 is having trouble opening files. When I attempt to open a file the progress bar gets to about 85%, a "not responding" message comes up for about 15-20 seconds, and then the file opens. Two workstations in the office have AutoCAD 2013, one has 8GB RAM and Windows 7 64 bit, the other has 16GB of RAM and also a WIndows 7 64 bit OS. Neither PC had issues opening files before the new server went in, and neither PC is having problems with any other network program. Is there somewhere within the program or in Autocad's registry entries that might still be pointing to the old server? I have tried the following, Firewall has been turned off, VP has been disabled, repair has been run on the program (through programs and features in the control panel). I have email support through Autocad and sent them an email this morning, but have yet to receive a response.
View 9 Replies View RelatedI am using Autocad LT 2011 and when i press the hatch button it shows the comment 'not responding' at the top of the page and it takes about 15-20 seconds to repsond and when it does eventually respond it doesn't allow me to change the scale until after i have chosen an area which in some case proves a problem if the scale is very small.
View 3 Replies View RelatedI have a drawing that is "Not Responding" when switching from a layout tab to model space by clicking the "Model" tab. I ran a recovery on the drawing and there are no errors. I can't get into model space except by clicking inside my viewport.
View 5 Replies View RelatedFor a while now...every time i switch to model space...autocad gives me the NOT RESPONDING problem. i get the spinning icon and it seems to last forever. seriously...i can go get coffee and come back and its still thinking. i've cleared temp files in autocad. what could be causing this?
View 3 Replies View Relatedin my autocad 2014 save as in 2007 & 2004 format system is not responding and not able to finish. but when i save in 2013 and 2010 format is ok. i install same copy of autocad in my laptop its working good.
my system config: operating system - w7 64bit
8gb ram and 1tb hard disk
error message:"Display driver stopped responding and has recovered" Display driver Intel Graphics Accelerator Drivers for Windows 7(R) stopped responding and has successfully recovered.
This happens when I copy and paste a group of blocks. The screen goes black for 2-3 seocnds then finally recovers.