Photoshop :: Recent Corel Photopaint Convert
Jan 14, 2006
I am just learning photoshop after years of using Corel Photopaint. Over the years I tried Adobe but just got turned off because I thought it was non-intuitive, but now I'm on a new mac with CS2 I understand I have to just get used to it so i can have its powerful features! After days of searching, I have yet to find the answer to my biggest question...
How do you customize the toolbars?? I know how to move the windows, dock them, make them visible/invisible, etc. But how can you add new buttons to them? I'm used to having every function that I use often right there, one mouse-click away, instead of nested inside of some menu. Like a save button for instance. Or copy and paste.
View 3 Replies
ADVERTISEMENT
Feb 21, 2008
Does anyone know if Photoshop CS3 will import a Photopaint .cpt file. We are thinking of switching from Photopaint to Photoshop & have a large number of files that we would still need to have access to. There are way too many of them for us to open each one in Photopaint and then export as a psd.
View 7 Replies
View Related
May 18, 2012
When selecting "File - Acquire Image" in Corel PhotoPaint X6 it does not see my scanner, yet when I open Corel PhotoPaint X5 the scanner is there and I can scan directly from there.
The scanner also works fine in Adobe Acrobat and other software installed on my computer. Only Corel PhotoPaint X6 is not working
View 4 Replies
View Related
Jun 19, 2012
PhotoPaint: Cannot select multiple files for batch mode
View 5 Replies
View Related
Dec 8, 2013
My PC has three drives
C for the programs, D for the photos and F for the backup photos
With the upgrade to Elements 12, C is nearly maxed out
Except for "C" there are multiple catalogs on each drive, C should have none
Â
I do not see an ability to convert the most recent catalog on each drive?
When a catalog is converted - does it reside on the same drive as the catalog?
If a catalog ends up on the wrong drive, for example C - can I just move/drag it to another drive?
Your catalogs end up under something called "breeze data" and are very diffcult to find, why are they called this?Â
This conversion appears to have placed the converted photographs in 'C", is that possible, since they were not there at the start?
When I tried a conversion earlier this evening, it only did the most recent photographs I had accessed, how do I ensure it gets them all?
Since it did a partial conversion, will the rest of the conversion land in the same catalogue or in a completely new one?
When a file is converted, and I return to the drive, how will the icon be changed so that I know it has been converted?
Â
For the previous elements 10, can I just drag it from Drive C to D (that way I can still use it with the pictures I have not converted), and have it still operate or must it reside in a program files folder?
As I type this I wonder if I might not be better off with just leaving the photographs as they are on 10 and starting afresh on elements 12
View 3 Replies
View Related
Feb 2, 2013
how to convert rgb to cmyk in coreldraw x6 photopaint. im only using coreldraw free trial. before i will buy this product.
View 3 Replies
View Related
Feb 18, 2012
I have H & S X5. How do I convert a RAW file to Jpeg.
I click open and my RAW file opens in Camera Raw Lab, I Â make my adjustments and click OK - it then opens in PP but I don't have the option of saving it as a jpeg.
When I asked for the file ext to be associated jpeg shows in the filter but is not available as a 'save as' option. I can do exactly the same in PSE8 and have the jpeg option.Â
View 10 Replies
View Related
Sep 15, 2013
I have just had to do a complete re-install of my CorelSuite X4 following the addition of a new hard-drive.
I now have the situation in Corel Photo-paint where -
1Â Â I open a grey-scale image (.jpg).
2Â Â I paste (as a new object) an RGB colour item (a previously created .cpt file)Â onto the grey-scale image.
3  I then "Convert to 16Bit grey-scale" in order to change the whole new image to grey-scale, but the pasted object is being automatically flattened into the image and I can no longer work on that object independently.
I never had this before, as I was always able to convert to grey-scale and the "pasted object" would remain with the mask outlined and still allow me to work on it.
View 5 Replies
View Related
Mar 4, 2012
Is it possible that I can open a bitmap present in a coreldraw file in photoshop, edit it there and it gets back to its original position. that is the thing for which corel photo paint gets opened, i can set Adobe Photoshop for editing images?
View 14 Replies
View Related
Oct 11, 2011
how to export the text as an editable to photoshop or to photopaint as exactly as in the coreldraw ? It should be editable after exporting themÂ
View 1 Replies
View Related
Nov 18, 2011
is it possible to convert a photo into a silhouette in cd. I have been playing around with a few pictures but not getting great results, although they are improving each time. What I want to do is convert a picture of my neice into a silhouette and maybe cut it in vinyl.
View 6 Replies
View Related
Feb 15, 2013
I've got this huge project - a printed catalog - that involves hundreds of product photos, of which the originals are scattered all over the place in different directories, etc. Nobody knows where a photo might be hiding. However, luckily, this is an update of an earlier catalog of the same type, so most of the photos are already there. Unfortunately, many of them need to be "photoshopped" in some way, adding pigtail connectors in place of terminal blocks etc., which is fine.
But, when I try to use the edit bitmap function in DRAW, the photo always opens in a new copy of PhotoPaint, forcing me to then save it separately, adding a name instead of "Bitmap in..." which would be all the 100 or so photos that I will have to work on. I don't have any need to have the bitmap saved separately except that I need to have the various photos that I'm disecting in the same copy of PhotoPaint, so that means I have to jump though all these hoops.
Q: Is there a way to force the Edit Bitmap to open everything in the same copy of PhotoPaint? So that I can simply cut and paste pieces, etc.
View 11 Replies
View Related
Feb 25, 2012
I have several book cover designs that I've been working on in CorelDraw saved as CDRs, but now when I go to open them, they open as CDRs in Corel Photo Paint, I don't understand why? I've tried the Open from File Menu and then Save As CDR , but it doesn't work either. Is it possible I clicked on something I shouldn't have? Also, I need to separate the background from one of the designs in bitmap, the image is as if its all grouped together and won't ungroup or let me edit it, I did not save in layers or masks (any other way I can still try and edit it?
View 5 Replies
View Related
Apr 17, 2013
My tool box specifically- the bar which lists commands like print or save--- is suddenly gone--- don't know how to get it back with no commands to call it up
View 3 Replies
View Related
Jul 31, 2012
When I open PhotoPaint X5, which is part of my CroelDRAW X5 Suite, I receive an error message; "PhotoPaint has stopped working". CorelDraw X5 opens correctly without any problem.
I have un-installed and re-installed the CDX5 Suite, but the problem still persists.
Below is the 'Problem Signature', which means nothing to me!Â
The Problem Signature:
Problem Event Name:APPCRASH
Application Name:CorelPP.exe
Application Version:15.2.0.686
Application Timestamp:4d9be3e1
Fault Module Name:corelpp.dll
Fault Module Version:15.2.0.686
Fault Module Timestamp:4dc064a2
Exception c0000005
Exception Offset:0018a840
OS Version:6.1.7601.2.1.0.256.48
Locale ID:2057
View 13 Replies
View Related
Jul 6, 2013
I am a long time user of Corel products (well, since Corel 4). I have been running Corel 12 for several years, as financially, as a pensioner it is not viable to keep up grading and 12 has been perfectly adequate. I am on Windows 7 Home premium, and I know that 12 was not designed for that platform, however it has been operation satisfactorily since 7 came out. Today, It has crashed, and I am unable to open photopaint at all either from the shortcut or the program list.
(Corel Draw, which is the only other part of the suite I use) appears to open and be available. I tried to repair with the original disk to no avail, so that having failed I did an uninstall, cleared the caches the temporary files and did a clean install. Corel Draw is still working, but Paint will not open at all. The logo appears then totally disappears after a few seconds leaving the desktop clear. There has been no changes to the computer recently and until last night the program was working fine.
View 2 Replies
View Related
Jun 23, 2011
Working in photopaint . . . all goes well until I try to save or close the file. Then it stops responding. When I try to close CorelDraw, it says that I cannot close it while I have the photo open in Photopaint. However, Photopaint is no longer running. This is new problem since I installed Patch 3.
View 2 Replies
View Related
Jan 1, 2013
PhotoPAINT doesn't cycle through the images of an animation right after creating a new one.
Here are the steps to reproduce:
Create a new image and select, say, 5 frames for the image. Add some imagery to each of the frames (and don't forget to flatten the object hierarchy as PhotoPAINT doesn't deal with graphic objects for animated images.) Open the Film tool window and hit the [Play] button. Result: The image does not get animated.
CorelDRAW Graphic Suite X6.4Â @Â Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
View 4 Replies
View Related
May 4, 2011
I've been using these two programs for some time with no problem. I recently upgraded some of my adobe software and now when I try to open CorelDRAW of Photopaint, there is no welcome screen anymore and I can't click on anything.
Is there something conflicting with the welcome screen (flash or something that the welcome screen uses) that perhaps was installed with one of the adobe products, maybe? Not sure if it matters but I updated adobe dreamweaver and fireworks.Both programs are unusable now with this loading problem.
View 14 Replies
View Related
Apr 16, 2009
I have had CorelDraw & Photopaint X4 installed for several months and just started having this problem.
CorelDraw: Every time I use the Fill Color option, whether by double-clicking the bucket icon at the bottom OR using the option in the toolbar, the program freezes and never recovers. When I use the color palette to fill a shape, I do not encounter the problem.
PhotoPaint: Every time I use the Image ->Paper Size option, the program freezes and never recovers.
I have reinstalled the program and the problem persists.
These are options I use often, and if I don't find the solution I will have to find an alternative to Corel.
View 5 Replies
View Related
Mar 24, 2012
Corel X4, still installed on my PC, has no problem at all.But Corel X6 (CorelDRAW as well as CorelPHOTOPAINT) crashes after the preview scan with Epson Scan (EPSON Perfection V330 Photo) in professional mode. When I use the simple mode (which does all automatically: preview scan, border recognition, best guess about resolution and color mode and the final scan) there also is no problem.
But I wonder what the TWAIN driver does with Corel X6 after having finished the preview scan ..I already tried to uninstall and reinstall the (latest) driver suite from EPSON without success.
View 1 Replies
View Related
Jan 18, 2013
After using Camera Raw Lab for .NEF files, photopaint seems to be incapable of exporting the file to a jpg file without extra fiddling.Â
I can export after I convert the file to RGB mode, but I want to understand why I cannot export as a jpg without doing that...?
View 11 Replies
View Related
Dec 20, 2011
I seem to have lost the functionallity of double-clicking on an image placed in CDR X5 to automatically edit in Photopaint. The checkbox in tools/options/edit is checked and photopaint can certainly be opened in the Application Launcher but double-click does nothing.
View 5 Replies
View Related
Sep 11, 2008
using Save As to a network path that is not persistent. When starting CS3, it fails to open until network paths in recent files are restored.
It seems to lookup all recent file locations while starting up.
View 1 Replies
View Related
Aug 21, 2009
I run CS$ on Vista. The 'Files>Open Recent' list bear little or no resemblance to the images I actually had open recently. I am not on a network, and the only one working on this computer.
View 10 Replies
View Related
Dec 31, 2012
Right now I can't even open Photoshop however before I updated it would open. Now it is crashing on start-up. Also during the updated this error happened:
Adobe Photoshop 13.0.3
Installation failed. Error Code: U44M2P7
Â
Some additional information I've noticed is that the blue background of the launch screen has suddenly become transparent. Some things I've tried to fix it are clearing cache and cleaning bad font.Â
Â
However I was hoping to work on a project with it. Is there anything else I could try without resorting to uninstalling and re-installing it? At this time I don't have a way to re-install it as it's a company's version.
Â
This was not happening before the updated was installed. Had I known the updated would cause the program to crash I would not have installed it.
View 2 Replies
View Related
Nov 14, 2013
Photoshop keeps opening up recent images even though I've closed them out. Why?
View 1 Replies
View Related
Sep 20, 2012
The icon appears disabled. When selecting the app I get the error msg: "You can't open the application "Adobe Photoshop CW6.app" because it is not supported on this type of Mac.Â
Â
CS6 worked fine after upgrading to Mountain Lion. It appears an update that I downloaded from Adobe earlier this week could be the cause.
View 1 Replies
View Related
Jul 31, 2009
I went to print an image out of Photoshop and it responds with the error message >>Before you can perform printer-related tasks such as page setup or printing a document, you need to install a printer <OK> I have a small network of 3 machines, they all print to a shared printer from my own machine, connected to my machine via USB wire. The printer is working fine in all other programs, including Acrobat. I have not tried any other CS4 programs, but Word, Excel, etc. all work locally and through the network. The other network machine that also has Photoshop CS4 is having a similar issue. It doesn't give the same error message, but in the dialog box where you pick the printer it says 'unable to connect.' This machine can print from other programs fine also. I saw a similar thread from fall 2008 in the Mac forum. I've tried everything they suggested there >> delete and reinstall printer, restarted several times, updated Adobe manually, updated printer driver, all Windows updates current, run anti-virus checkers. The only thing I can point to is the recent update processes,
View 3 Replies
View Related
Mar 12, 2013
Just started having an issue with PS CS6 crashing each time I try to save a file, I've scoured multiple forums, re installed, checked fonts library.
View 16 Replies
View Related
Jun 17, 2009
In CS4 Bridge 3.0.0.0.464 when you right click on a photo there is the option to 'move to'. This gives the options of a greyed out 'recent folders' 10 other folder locations and 'choose folder.....'. How can I make the folder location 'stick' in the 10 other folders section? Where do these 10 folations come from?
View 3 Replies
View Related