Using Graphics Suite X5. Windows 7 Spraying images was no problem until I attempted to add my own images. Now when I click on sprayer, the program stops. I get an error message saying some other program is shutting it down.
View 1 RepliesYesterday when I was working with Corel Photo Paint X6 and Corel Draw X5 all of a sudden all my desktop program icons changed to show Corel Draw X6 -- also an .ink extension appeared behind all the program names. (this also happened in my "all programs" list.) Everything I click on takes me to Corel Draw X6. get things back to normal?
View 3 Replies View RelatedWhen I open PhotoPaint X5, which is part of my CroelDRAW X5 Suite, I receive an error message; "PhotoPaint has stopped working". CorelDraw X5 opens correctly without any problem.
I have un-installed and re-installed the CDX5 Suite, but the problem still persists.
Below is the 'Problem Signature', which means nothing to me!
The Problem Signature:
Problem Event Name:APPCRASH
Application Name:CorelPP.exe
Application Version:15.2.0.686
Application Timestamp:4d9be3e1
Fault Module Name:corelpp.dll
Fault Module Version:15.2.0.686
Fault Module Timestamp:4dc064a2
Exception c0000005
Exception Offset:0018a840
OS Version:6.1.7601.2.1.0.256.48
Locale ID:2057
I noticed over the last few days that Corel was taking a while to open files. Like, if I had one open already it was usually fast enough, but if Corel wasn't open I'd get an error from the file manager I use saying it couldn't execute the program. Every time though, if I closed CorelDraw, and open a new instance of the program I'd be fine again.
Today has been different. Today I've had to restart corel practically every time I've tried to open a document. A few minutes ago I couldn't even get corel to open.
Right now where I'm at: I can open corel, I can change workspaces, but I can't open any file or even a 'new blank document' It freezes/hangs with the processing bar at about 80 %.
I'm going to try a restore point. I brag about how stable my system is, this makes no sense, I don't think it is a corel problem, I've noticed a ton of updates from Windows starting middle of last week. I just figured it would work itself out. I'll post every step I take. Oh, and by the way, I can open PhotoPaint Just fine.
I've removed update KB2853952 - Improvement only in that I can open corel, but can't open a new document or an existing document. I've done an F8 while starting up Corel Draw and reset to factory specs. No change. Deleted all 10,006 items in my temp folder. No change. System restore back to 9/10/2013 worked. Corel functions as expected.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
Font Navigator stopped working correctly. Not showing any fonts. When will be update for this software?
View 4 Replies View RelatedResetting the User Setting with the the F8 key didn't solve the problem. Once the user gets caught up on a couple projects I'll try to update the version to SP3 and the hotfix.
View 14 Replies View RelatedI'm having a hard time finding the right compression ratio for online images. My graphics always end up too large without the quality to match. I haven't had luck exporting from Corel Draw to a JPEG, so I usually save my CDR file, open it in Corel Photo- Paint, and save as a .jpg from there. I always play with the Compression and Smoothing values in the Export JPEG screen, but I think I'm missing something.
We hired someone to put together a Flash graphic recently. It was essential an exisiting graphic with sliding text boxes. My JPEG graphic that he worked from was 113K and his final Flash graphic is only 36K, and it's far more sharp and crisp.
The kind of graphics I do are used for a web site and also for printing with a Roland Versacamm wide format printer. My question is for graphics for a web site do you design in RGB colors and when you design for printing are you using CMYK colors.
Or are you using one type of color over the other for both purposes?
Once upon a time a professional told me to import images to corel in the correct resolution and not to downsize them within corel because the quality will be worse then. Is this really true? Or is it no problem to downsize any image or upsize an image that has a big DPI?
View 9 Replies View RelatedI'm new with Corel and I'm creating a banner and logo for a nonprofit organization as a volunteer. I have two or three questions. How do I divide a vector horizontally and vertically? How do I use a downloaded font in Corel? I can't import it in. Is there another way?
View 4 Replies View RelatedI have missed them, but last night after installing the X6 from the download site, I can not find the new 1000 fonts, templates, or the 10,000 new images.
View 14 Replies View RelatedWindows Ver 7, CoreDraw X5
In previous version I was able to preview WMF Images when I selected them from Corel Open Window.
In the current version X5 the preview does not appear in the right side of the window.
I cant figure out how to contour my images so it only cuts my outline when I send it to my graphtec cutter, I have a Graphtec CE5000-60 cutter plotter, Corel Draw Graphics Suite X5, and Windows 7.
View 6 Replies View RelatedI have just upgraded to X5 from X3.
I have got the Connect docker up but I can't see the content.I have opened the folders but the files are just white squares...... If I drag one onto the workdesk then the image appears.Photos and Objects work but can't see the clip art images
I am having a strange problem when exporting jpg images. I export the image and I can open it with PhotoPaint, but if I try to import it to Dreamweaver or send it in an email, the file is attached, but the image cannot be seen. I get the square with the red X instead.
View 8 Replies View RelatedI have been using Corel since version 3. How to save an image for the web once you have created hotspots with url links. I'm trying to create a link for my facebook page image to my website.
View 1 Replies View RelatedSometimes I am working with "heavy" files, images of huge size and when I thrown them to corel it really starts to slow down. My question now is, if I remember correctly there is an option when you import an image to corel it just keeps the path of the image and adds the image on corel on very poor quality just for you to work easily. When you are finished you just make something and the paths of the images are replaced with the originals.Where can I find that option?
View 6 Replies View RelatedI have a website that I recently updated with a new logo created on Corel Draw X4 and then edited using Photo Paint X4. I resampled the image at 72 dpi and save as a jpg.
Once saved I loaded it to my Microsoft Windows Live Small Business account for upload to my website. It was a straight forward process. However, when viewing the website, I noticed that while the logo was visible using FireFox browser, it was not visible using the Explorer browser.
My first thought was that it must be a setting in the browser, but the image also failed to render when viewing the website through my smart phone browser.
This brought to mind that I had had this problem before when trying to upload an older logo design in the same manner. Some browsers just would not load the image.
So, I had this crazy thought that it may have something to do with Corel and the way it saved jpg images. So, I opened the jpg using the old Microsoft Paint program and without making any changes to it, I saved it from there. After that the image loads on the website with all the browsers that wouldn't work before.
ive encountered a problem in X3 when i try to export any artwork or photos to my desktop as jpegs they images are all blurry,outside lines are not sharp at all,ive not altered any settings whatsoever and also found that full A4 images will not save at all,just as a solid black line.
View 2 Replies View RelatedI've read that images for iPad are different.
I have a logo on my webpage (PNG, 190x60 pixels). The image looks okay in Chrome (desktop pc) but not on an iPad. It looks blurred.
We used to use version 4 at work and loads of images drawn, my boss has converted to version 12 but when we open the drawings now all the text is in the wrong place and too big etc.
I have been given the task of fixing them all and wondered if there was an easy fix rather than clicking on each text box and changing each bit one by one, sitting with my fingers crossed.
I am fairly new to Corel, and I have been using the program to do a lot of icons to load onto a webpage.
Every time I upload an image, it blurs the edges around the text and the color looks distorted.
Since installing the X6 Trial I have lost the images for my cdr and cpt thumbnails. I haven't decided to upgrade yet but would like my thumbnails images back in the meantime. Do I do a repair with X5?
View 6 Replies View RelatedI use corel draw to assemble jpeg images I have exported from another application into a presentation which I then publish to pdf.
My problem is that whenever I update the images I have to re-insert and position/scale each one again in the corel presentation.
I've been trying to work out how to do this with linked files or OLE objects, but without success.
Is there a way to link or embed jpegs so that if I update the original jpeg it will update in corel draw?
I've tried to follow corel help but it doesn't work. Inserting an OLE just puts a box with the jpeg filename on the page, and it prints as just a box with a filename as well.
I am working with some very large images in X5, ~ 2500 mm x 1200 mm at up to 600 DPI sometimes. (And before you say it, yes, I do need this. It is a very specific application that we work on daily and I do need the ability to basically control every single pixel at that size & that resolution). I'm using WinXP 32-bit (company mandate).
When I need precisely sized objects, I am using CorelDRAW and occasionally when I need pixel perfect placement, PhotoPaint gets the call. The images may go through both before it runs through a final backend processor (some specialized software) and then going to print.
The problem is that I am running into limits when I go beyond 300 DPI (depending on the image dimensions). For example, CorelDRAW often will fail to export a TIFF correctly when I try a 450 DPI image at that size (some TIF file comes up but nothing can load it, it's corrupted). Or for even smaller images, if I enable transparent background, I also get a similar problem. Sometimes, e.g. Photo Paint, just chokes up with out of memory problem and fails to load images at all.
Thing is, we actually have Photoshop CS5 available and while there are many things I don't like about it, it actually can handle stuff of this size. So there is also a push to get Illustrator as well under the same assumption that it will work. However, Adobe stuff is way more expensive, feels more bloated and slower and (for me at least) a pain to use compared to Corel, so I'd rather not.
Would moving to 64-bit WinXP work? Or would I need to go to CorelDRAW X6? This is already a quad-core machine with 4GB of RAM.
I found a bug on X6 and not sure if it was there before the update. I have a Power Clip frame that contains 2 images.
The one to the right is smaller than the frame while the one on the left is much bigger and there is a blank space between them. When I export the image to a PSD file the bigger image inside the frame wraps around and a portion is displayed on the right.
Im new to both coreldraw, and to the graphtec cutter, so my problem may have a very simple answer. Ive been playing around with it, learning how things work. Smaller images are no problem, but Im having trouble cutting larger images.
the plotter can cut up to a width of 610mm, and Im using 610mm vinyl. I need to cut some items that are 600mm wide. First time I tried, it left a gap on the left side of approx 50mm. It also stopped cutting approximately 20mm from the right side. next time, I loaded the vinyl into the machine 45mm further right and tried again. this time the left hand edge was positioned where I expected, but the right side still stopped in the same place as previously, leaving a gap of around 70mm on the right hand side. you would think I was trying to cut something bigger than the capacity of the cutter, but obviously this isnt the case.
if I have missed any necessary information etc, Im very new to all of this.
Corel Draw Home && Student Suite X5 / Win 7.
Problem: All images are poor quality. I've tried clicking on enhanced view. That didn't work. This is across Draw, Photo Paint and Connect. I tried to alter a logo in Paint a year ago. I thought maybe it was just my machine causing the problem. But, I emailed to my brother and it was just as blurry on his machine. I've tried to look at Clip Art and the vector images are really bad--especially ones from previous versions of Corel.
Why is it that when I import an RGB image, when I convert it to CMYK this same image darkens significantly? Is there an option I can check somewhere?
View 5 Replies View RelatedI use certain images on a very regular basis, mainly ellipses. To save me drawing a new ellipse each time, or importing a saved copy of it, is there a way to keep your most body images handy so in just a click possibly 2 you can put them on the new page in Corel Draw X4.
View 2 Replies View Relatedgood procedure to scan pages from a book on a flatbed scanner and edit the resulting file in Corel Photopaint (PP).
My situation is the following: The book contains text as well as images. The final image, after scanning and editing in PP should look good when printed on my simple desktop B&W laser printer but also look well when placed in a document for viewing on the computerscreen. The latter require colors.
My experiences so far: Usually I scan from PP using 600 dpi, to make the text look good on print. Often I get text prints which are not that nice, because in the rasterization which is taking place when my image is printed on my laserprinter in B&W it contains white pixels in the text sections. I can see them when using my 8x Horizon magnifying glass. I guess it is because I need to use pure black in RGB. What are the optimal color settings for my document? (Color Management setting ...). What I usually do when editing the images in PP is that I want to remove the often greyish areas around the corner of the page and make the text stand more black and crisp. To do so, I out-mask the images to not destroy them. Then in the Image Adjustment Lab window I use the "Select White Point" and "Select Black Point" to make the background behind the text white and to make the text more black. Sometimes I also use "Contrast Enhancement". Afterwards I sometimes use the "Invert Mask" tool to improve the images a little.
I am interested in the best settings for my document (Color Management) and a working process which means my scannings and editing can be accomplished in a decent time with a relative high degree of quality.