What are the folders of my current CorelDRAW installation i can back-up and use them to replace the folders of a new installation so to retain all my settings (workspaces, customizations, shortcuts, settings, plugins, etc)
I need to uninstall and re-install my current installation
what to copy from my home installation of Coreldraw 12 so I can put it on the installation I use at work. I want to save EVERYTHING, hotkeys, default new documents, default and custom palletes, macros, command customizations were I have applied certain hotkeys like ctrl+m or whatever to run those custom made macros/vba scripts, things like snap to grid, snap to object, wether or not to save backups and if so how often, etc... Bascialy ABSOLUTLEY EVERYTHING.
I tried copying CorelDrw.ini, coreldrw.env, and GlobalMacros from my home computer from the folder:
C:Program FilesCorelCorel Graphics 12Draw
and then pasting it into the same folder on my work machine, clicking OK when asked if I want to replace the already existing files there. Some things worked, some things seemed not to. For example, the macros i wrote copied over fine, but the hot key association i made for them didnt, i had to set that up again in Customization.
I would love to find out how I can really back up all my settings so I can simply copy them over to my work machine instead of taking a couple hours to re-enter everything in. Also, I think all serious corel users would want to keep a backup copy handy in case they ever have to re-install corel or if they buy a new computer, etc.
I just got a new system installed corel draw fresh, loaded all my gms's , imported workspace , great all work as before all my menus are nice and active...,
However my custom gradients have disappeared..., it took me a while to set up certain gradients and I removed lots of the useless default ones that were there preset in the previously installed corel draw.
I accessed my old hard drive and found the gradient preset file however when I copied and replaced with the old gradient file the gradient data is not there....
location C:Program FilesCorelCorelDRAW Graphics Suite X6DrawPresetsStyles - FountainFills.cdss
is there another location where my old gradients would be saved?
Is there a way to have my custom settings load when exporting a .jpg every time, without having to use the dropdown and select mine every single export?
View 2 Replies View RelatedAfter a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:
What does it mean? I can´t imagine where this comes from?!? How to handle this fault?
When I try to install Corel X6.1 I downloaded from Corel's site, I can not install because I see no option to continue the installation.
Configuration of my PC: i7, 16GB with Win 7. There are Java and NetFrameWork installed.
I tried installing the X5 and had the same problem.
when i install corel draw its gives me an error that your setup file has an error it gives crc error and ask me to ignore or abort when i ignore its continue extraction butt when its extract then on installation its give errrors. i install trail version i download from different sites like from corel or downloadcnet.com but its give me same error when extraction
View 3 Replies View RelatedI have a full version of the X5 graphics suit and now I would like to install it on my notebook. However, I have only 3 GB hard disk space left, so I wanted to install X5 without the extra content. But I cannont find an option in the installer where I can switch the extra content off. It seems that it always wants to install the 6GB extra content. Required hard disk states >5GB, even when I deselect everything. Hence, I cannot continue the installer.
How can I get a minimal installation of the X5?
I have had to setup the CutContour in x3, x4 and in x5 with success, but then we got new laptops that run 64 bit, windows 7 and a new versacamm 4.7.1 and suddenly the usual ways won't work.
I used the Roland pallet that X5 comes with, no luck, I've imported my old pallet profile and put it in my docs, no joy, I've even recreated the CutContour from scratch... NO JOY. In Corel the colour is described as 100% CutContour and it is a spot colour, but when I export it, no marching ants.
Any issues and workarounds regarding 64bit and the new roland and 64 bit Corel x5?
Is it my export settings? my colour profiles? I made screen captures of the old setups so I know they are the same as the old ones and used to work fine, unless I made a mistake there...
Even though the trial installation has been removed, runs through the entire process and then reports that there is an existing installation.... What should I do?
View 4 Replies View RelatedIs there a legal way to perform the update / patch - Install (Corel Draw Suite X6) without online access?
View 1 Replies View RelatedI have tried to install Corel 12 to Windows 7 (x64). Corel 12 refuses to install himself reporting "Internal Error 2738". I tried to solve this problem by re-registering vbscript (recommended for Windows Vista), but with no effect.
View 8 Replies View RelatedI was facing problems with X5 soon after installing it, it actually doesn't installs properly. Somehow i have to End Process of installation and though find X5 in my Start menu of Windows XP SP2. Well the actual problem started when i recently tried to publish PDF for one of my client's brochure of 17 pages, X5 closes all of a sudden and i have to restart the whole process. At times it creates a PDF which then has errors and Acrobat Reader don't read it.At times X5 even gives Error while saving files. Then have to click Save till it actually saves the file.I uninstalled X5 thinking, there could be some corrupted files and re-installed, but all in vain..
View 1 Replies View RelatedI"ve just recently upgraded to CDGraphics Suite X5 (from 12), along with Windows 7 and M.Office 2010. When trying to export jpg's I've got 2 problems:
a) Jpg files that I"m now exporting seem to have so many more "options" for exporting and are automatically exporting colours as CMYK. Some of the software programs that I use (for programming digital signage) require jpg files in RGB. Is there a way to set this as a default instead of having to change this everytime I export? (note that I have "checked" the embed colour profile option for my US Web Coated Pantones).
b) The default for exporting is also set at "custom" - should I always be changing this to either medium or large, or can I just leave it at custom. Often I am just emailing jpg's for approval purposes, so I don't always need large file sizes. Does custom set it to the largest possible file size?
I found a tab at the top of the export window that says "Load Presets" and lists for example "low quality jpg.xml" what is this for?
c) when I look at my jpg files in my documents folders they appear "locked" with a little lock on them. Old jpg files created in CD12 don't have this little "lock" icon on them. I have checked the properties and see that these files give full access for modification etc, so I can't figure out why they may be locked.
How can I determine "Tab Settings" with 5 mm - as my default?
It does not glue when I change such preference and use "Save Settings as Default"? When I reopen Draw it is back to 10,0 mm.
This may be a silly question but I cannot find where to import all my custom keyboard shortcuts from X5. Is this doable?
View 3 Replies View RelatedI managed to get a nice set of different settings to publish a corel file to pdf. Now I would like copy these settings to multiple other pc's in the office. where a can find the file/folder in which these settings are being saved?
Otherwise I would have to set all different pc's individually and I rather spend my time otherwise.
X3 - I use X4 at work with no problems but at home I have X3. I set my workspace the way I want it and all my presets the way I want. I hit tools/save stings as default. I then save my workspace as todays date. Close corel and reopen. It starts with the defaults every time! I have to manually choose my workspace and even after doing so my settings have reverted back to default i.e. text to be point not inches like I chose etc.
View 3 Replies View RelatedSo in document color settings in color management, should the primary color mode be RGB or CMYK? I only print inkets and never send stuff out to a regular printer.
should all color settings be at RGB if the option is offered?
I have an existing X6 document which has a rectangle object with a Lens attached.
I did not create the document, so what sort of lens it is and what settings the lens has. I suspect it is a transparency lens.
I cannot find any way to locate the settings for this lens - so that I can reproduce and modify the lens settings. Where i can find the settings for the lens?
When you save a PDF preset it says 'security settings are not saved with PDF preset' is there anyway to change this, i want to save the security setting so i don't have to set a password each time i save it, i make dozens of PDF proofs a day and its a pain having to set it every time i publish to PDF.
View 2 Replies View RelatedI use CorelDRAW X4 exclusively (90%) for Laser work. I have a Page saved as Laser Page. It use to open with a 24 x 12 page area and Horizontal and vertical guidelines in place. It is set to "show guidelines."
However, every time I open a new document, the page layout and guidelines are not there. I always have to rebuild the page and add the guidelines. What has changed so that all I get is a blank page anymore? Or how to reestablish my defaults? I have re-saved it as my new default countless times but nothing sticks. It's a pain to have to always reestablish the layout I want to work with..
I've noticed that DRAW seems to forget whatever settings I choose for duplicate.
So, I found the following in the index:
"Copying objects quickly. You can use other methods to create copies of objects quickly, without using the Clipboard. You can use the plus sign (+) on the numeric keypad to place a copy of an object on top of the original object, or you can create copies instantly by pressing the Space bar or right-clicking while dragging an object."
The + sign thing is cool. Wish I had known. But the Space bar drag either doesn't work at all or puts down one copy at what is apparently a set distance from the original, and then a second copy wherever I release the mouse button. ? Win7, DRAW X6.
I have been drawing the drafting lines and measurements manually and noticed the dimensions tool. Works great but when I shrink the layout for proofing the measurements change. Is there a setting that I can select that will keep the actual measurements of the drawing no matter how I resize it for proofing?
View 9 Replies View Relatedbug-2.jpg
See the red marked area, where it is not accepting to select the rgb or cmyk. Only accepts the Lab only. It is changing the X5 but not in the X6.
how to set the Custom Sprayer I wish to use only my own creation of spayer and brush strokes.
eliminating those brushs strokes to come up every time I wish to use my own
good procedure to scan pages from a book on a flatbed scanner and edit the resulting file in Corel Photopaint (PP).
My situation is the following: The book contains text as well as images. The final image, after scanning and editing in PP should look good when printed on my simple desktop B&W laser printer but also look well when placed in a document for viewing on the computerscreen. The latter require colors.
My experiences so far: Usually I scan from PP using 600 dpi, to make the text look good on print. Often I get text prints which are not that nice, because in the rasterization which is taking place when my image is printed on my laserprinter in B&W it contains white pixels in the text sections. I can see them when using my 8x Horizon magnifying glass. I guess it is because I need to use pure black in RGB. What are the optimal color settings for my document? (Color Management setting ...). What I usually do when editing the images in PP is that I want to remove the often greyish areas around the corner of the page and make the text stand more black and crisp. To do so, I out-mask the images to not destroy them. Then in the Image Adjustment Lab window I use the "Select White Point" and "Select Black Point" to make the background behind the text white and to make the text more black. Sometimes I also use "Contrast Enhancement". Afterwards I sometimes use the "Invert Mask" tool to improve the images a little.
I am interested in the best settings for my document (Color Management) and a working process which means my scannings and editing can be accomplished in a decent time with a relative high degree of quality.
Will I lose my workspace or CM settings when installing from 16.1 to 16.2?
Right now everything is running somewhat smoothly for me and I'm wondering if I should even bother upgrading?
Ideal color settings for exporting .jpg and .eps files for CMYK printing? The default X6 settings result in rather washed out looking exports (both on the screen and on the prints). Black looks very dark grey etc.
Never had this issue with X3 but I understand that X6 uses a totally different color engine so I figure I just need to know the correct settings.
I have just purchased Corel draw x5 and need to change the colour management default settings but when i go to tools, colour management, i only have document settings! I have done this with new pages, old pages, images on pages etc and no luck.
View 6 Replies View RelatedHow do I go about saving the settings on the open dialog box? It keeps moving to different locations and it keeps changing the Name / Date modified / Type / Size columns very narrow where it only shows the name and nothing else.
I do have the dialog box very large across so it can accommodate what I want including the preview.