I will attach a cdr picture. Nothing wrong with it, until I save it as svgz. I don't get an exact copy of the original. Things are moved. When I save it in version x5, I can save it as a perfect copy to svgz. What is the problem with x6?
View 3 RepliesI'd never had problems with previous versions of corel draw with this. I make a drawing in rgb colours and save it as svgz. Even with a simple picture like a few squares. In x6 I get the mention "unvalid id's found".
I can't figure out what I have to do to prefend that mention.
Is this possible? Basically, I have a few hundred photos (in RAW format) that I wish to mask then cut/paste on top on another layer in Draw; however, they are all circular and all would be the same size give or take a few hundreds of an inch. This is not a very easy thing to do by eye with the circle mask tool in PhotoPaint.
Perhaps there is another way to do without, masking from PhotoPaint, but I can't think of it.
I just installed cdr x5 on a tablet pc (asus slate B121) and I like it very much. But I begin to get frustrated by the Poliline tool.
Since this tool needs you to double click to end a curve I always get curves with added nodes to the ends (it's impossible to do a double-click with a pen without moving the pen between the two clicks.
The only workaround that I found is to move away the pen from the screen far enough so that you can press the space bar to end the curve without extra nodes. But this is really extra gymnastic for your arm... and quite annoying while you try to get the job done in few minutes.
So, is there a way to use the poliline tool without "putting down" the "unclicked" node while pressing the spacebar? Something similar to the freehand tool, but with the ability to draw curve-straight lines consecutively.
How do you create a perfect divided portions of two circle like the dial of a clock, it use to be so easy in previous version now in X6
View 5 Replies View RelatedIs there a way to copy a portion of a drawing in X6 for instance to replicate the portion inside the red square only.
View 9 Replies View RelatedI have a problem with each time I move a image, it makes a copy for the last position.
What setting would cause this?
What is happening with objects that are extruded on page 1 being copied to page 2
and the extrude flies out of rage, is that some sort of special effect ?? I wish I could animate it.
When i copy the property using the copy fill property dialog box the gradients are not copying exactly, see the video
[URL].......
For some reason i can no longer copy and paste text from one page to another properly.
I write the text out as normal (not using a text box) but when i copy and then try to past to another page it then does several other things.
It changes the font and cap height, puts it onto a text box and centres it on the page?
If i copy and paste text along with an object (say a simple box) everything copies and pastes perfectly, just not text on its own
Is there a way to copy the names of all the fonts I have listed in X-5 so that I can print the list?
I want to be able to check some things off the list and add other fonts to the list.
I tried opening the font list and highlighting to copy it to a clipboard.
With X4 I can right click a piece of text - with pick tool - and drag the selected text to an open area and the text is duplicated. With X5 this does not work - text is locked. The only way to duplicate is to copy / paste. Is there a setting that needs to be reset.
View 2 Replies View RelatedSomething strange happened today when I was working on a cdr project. I think I have by mistake somehow managed to completely delete the original rgb palette, copied the cmyk palette and saved it as "rgb" palette. As a result if I try to change the color palette, the rgb and the cmyk options are exactly the same palettes.
This happened whilst I was working on a cdr drawing. Somehow I managed to press a wrong key combination whilst trying to save (probably CTRL-something and then CTRL-S immediately after) and noticed that the colors on my drawing changed. I tried to undo, but nothing happened.
After some checking I realized that the original rgb color palette has been replaced with a copy of cmyk. If I now try to switch color palettes, the cmyk and the rgb are exactly the same palettes regardless of which cdr project I open (new or saved).
This is how I tried to fix the issue:
I tried F8 during startup - no change
I tried with the repair option of the installation cd - no change
I tried a removal and a new installation of the Suite - no change.
Could be worth a try: Maybe someone could send me a copy of their rgbstd.cpl-file so that I could replace mine in the C:Program Files (x86)CorelCorelDRAW Graphics Suite X4LanguagesENProgramsData
How to restore the rgb color palette to it's original status as I work mainly with drawings displayed on the net, not on printed materials and I'm getting desperate as I have a deadline tomorrow.
the speed of cutting and pasting, as well as saving a drawing in CorelDraw X5 has drastically slowed down.Could it be a Windows issue and not a Corel issue? I have plenty of RAM and I've defragged.
View 2 Replies View RelatedAll of a sudden my Copy Function quit working in Corel x5.
I can copy from other programs and paste into Corel, but I cannot copy from one file to another file (or the same file even) within Corel.
I was told it could be a possible update from Windows 7 causing it and that I need to reinstall my software.
I have a word that has an orange outline. Then it has a transitional blend going from yellow to the same orange as the outline.
I have worked out that I can use the eye dropper tool then use the right mouse button with the fill bucket, this will give me the color that the eye dropper picked.
But how do I then use the eye dropper tool to do a fountain fill. The yellow I need to copy is not a standard color that is found on my colors to my right. So I need to some how use the eye dropper tool to set the first and second transition colors.
Copy drop shadow properties is not working for me. When I click on the object to copy to, it tells me, "you did not click on an object." What do I need to do?
Edit: actually, I'm seeing that this is not working in Contour, either. And it may not be working in other effects as well, although I haven't tested those.
I'm using Corel Draw 12 and on some of my computers, if I resize or flip an image the original image remains on screen as well as the resized or flipped version. On other computers it doesn't happen.
View 2 Replies View RelatedI am using CorelDraw 12, and recently when I try to drag a drawing, I do a left click and drag. But in doing so, depending on how far I move the object, and how long I hold the left click down, it will just continue making duplicate copies of my object. So as I drag the object, it is also copying. I have had to restart my computer to get it to stop, but this is getting old.
how to disable the drag copyiing? Everywhere I have looked, I find that people are right-clicking, so to clarify, this is a left click issue with my mouse.
I have a problem in trying to copy text from an existing multi column text box and pasting it into another existing text box. It just doesn't work. If I copy text from a single column text box into another text box, single or multi column, it does work.
The only was to copy text from a multi column text box is to use paste special which then creates a completely new single column text box and pastes the text there. I loose all the formatting.
I can then copy the text from the text box created by that paste special process and then copy that to where I want it to go, but of course I then have to reset all the formatting.
I'm using the latest version of Corel Draw X6 -this probem however seems to have been introduced in X6 as I've just open X5 on my system and the copy/paste functon works as it shoud.
My project: I want to create a drawing based on a photo. The usual way is to place the picture on the working space in Draw and fix it there.Then draw all parts I want to have in my copy.Problem: I can't always really see what I am drawing.
Now my question:Is there a possibiltiy to "calk" a drawing to different coordinates than above the picture itself?For example: The photo is on the left, I "draw" above the picture and the drawing action, e.g. the stroke, happens right from the photo. The y-coordinates of the copy could stay the same while the x-coordinates are x plus a certain value.
When I copy, I only get an outline of what im copying in blue lines.
I must have played in the settings somewhere.. how to put them back?
I am having trouble with CorelDraw X5 SP3 in Windows 7-64 Professional. When I am in CorelDraw or in PhotoPaint, and try to Export as a JPG or PNG file, I get the dialog box showing the picture and details on the right side. But then when I click OK, NO File is saved. This is frustrating. So I go back and try it again and no file saved. So then I try a PDF save and it does it. Then I go back and try to get my PNG saved and it may or may not save it. Finally, I fiddle with it and I can get the FILE SAVED. What a hassle. What is blocking CorelDraw from saving JPG and PNG to finish their generation?
View 12 Replies View Relatedis this possible. A lot of programs auto-duplicate when you drag and press either the shift or ctrl or alt key. Its a habit ive gotten pretty into. Plus, its a little akward for me to go from a left click immeadeitaly into a right click with the mouse. I always feel like i've dragged the object a little bit when I switch fingers. it would be great to just add a hot key of shift+drag to this feature, wouldnt even have to turn off the standard right click option, I could deal with both being there.
View 1 Replies View RelatedFor some time I was using CorelDraw 12 with Windows XP and Excel 2007.I normally make some tables in Excel which I copy and paste into Corel using "Paste special"/Picture/Enhanced Metafile. In Windows XP there was no problem. Since I switched to Windows 7, I have the following problems:
- The font Wingdings 3 comes out as Arial.
- The second problem is a very strange thing: Some characters, such as ,-"; , always at the END of the line, just dissapear. It happens sometimes, not always, and I can't see absolutely no logic in it: I copy the same thing, paste it several times, and sometimes the comma comes out, sometimes not. I remember that this happened to me ONCE, long time ago, when I was still using XP, but then I restarted Corel and it stopped making problems. But now, with Windows 7, it happens almost all the time. I tried it on a few different PCs and I even tried it with Corel X4. Always the same problem.
I am using corel X6 64 on a Dell optiplex 9010 intel(R) Core(TM) i7-3770 @ 3.40GHz 3.40 GHz. 8.00GB of RAM. Its taking about 1-2 minutes to copy/cut/open a file/save a file or even publish to PDF. On the same machine Same circumstances but different User i have no problem. I have to use my user because its connected to my email and at this company i cant change that. I have researched many forums and its not color styles or object styles. It does it on a new file with only one object created. I got a new computer signed on to my user account and the problem persists.
View 14 Replies View RelatedI have a CDR project I am working on. As I work, I occasionally click the "save" icon to save the work. When I am finished for the time being, I am unable to click on either the "X" or "Exit". The program doesn't respond, and I have to go to the Windows Task Manager to shut down CorelDraw. Because of this, the work is not saved. I have Windows 7, and I also have all of the X5 updates installed.
View 5 Replies View RelatedI have done something to my X5 or X4 document that has disabled the ability to publish to PDF. What I could have done that would have disabled this? I just have text and graphics, on a poster sized document. it is one page.
View 2 Replies View RelatedI'm using CorelDraw X5 with Windows 7. When I go to save a file often it won't save unless I repeat the save file command several times. Once I do get it saved the file then shows to be locked.
View 2 Replies View Related"Save as", "cut" and some other funtions are not available within my CorelDraw. what could be the cause for this behavior and how I could get rid of it.
View 5 Replies View RelatedRunning CorelX5 on windows 7 - On my work computer when I have a file open and hit the save button I'm getting the message "can not save, file is open or being used by other program". I have to save as a different name. I assume another program is to blame and is associated with .cdr.
View 2 Replies View Related