I have been working in this file for weeks, but now I did the sp2 update and when I try to open the file, the font substitution dialogue box opens. No matter which option I select, it causes the program to crash and close.
View 1 Replies
I just got myself a new laptop with windows 7 on it. When I open a file that is missing fonts on my system the Font Substitution for Missing Fonts does not display on opening that file. Corel doesn't replace the missing font with an other font text it just shows up on my screen as a blank page. I need to know what fonts I'm missing in my system so that I can install them and continue working on my projects.
View 10 Replies View RelatedI just tried to open a CorelDRAW document on my other computer where I'm obviously missing one of the document's fonts.
Problem:
The CorelDRAW font substitution dialog does not list the missing fonts:
Thus, it's impossible to install them to get the document working as expected.x.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
After updating silverfast software to a newer version then SF-8.0.1r24(AFL)_x86, Corel X5 and X6 did crash when opening a file.
It didn't uninstall Silverfast or to reiinstall Corel X5 or X6.
Only reloading th whole computer (Windows 7 Pro) from an earlier image did work. But when installing the silverfast Update, the same thing happened.
Silverfast says, they don't install anything into Corel suite. I should ask Corel about the problem ...
Everything else keeps running fine after the silverfast update.
I tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies View Relatedi installed the update update x3, but corel open at the start a window "Problem at the Download Update2.exe". Although at ending corel.
View 3 Replies View RelatedI get the following error message when I attempt to update X6. Not sure what to do about it.
CRC error: The file C:ProgramDataCoralDRAW Graphics Suite X6.1CGS16w_cproc_p_11.1.048_redist_intel64.exe doesnt match the file in the setup's .cab File. The medium from which you are running the setup may be currupted; contact your software vender.
I want to use the font box, but all the font headings are dead - light gray. How can I turn them on and make them black / active?
View 5 Replies View Relatedhow I can get update patches 6.2 and 6.3 for CDX6. On the [URL]6.1 and 6.4 updates are the only ones available.
View 2 Replies View RelatedCorelDRAW 12 successfully installed on a new machine running Windows 7 Professional 64-bit; however, when attempting to run the SP1 patch (CGS12SP1EN.msp), I get the following message:
"The wizard was interrupted before CorelDRAW Graphics Suite 12 could be completely installed."
I have tried "Corel Draw 12 and vista" which attempted to run the Microsoft installer through the command prompt running under Administrator, but it doesn't work.
X6.I'm not sure of the correlation, but it seems that ever since I downloaded the recent update, the colours (including black/grayscales) in the RGB vs CMYK palettes look different. What I mean is, I have the RGB and CMYK palettes right next to each other, and they used to look identical; now all the CMYK ones look lighter/washed-out than before.Or could it have been a recent Windows update?
View 4 Replies View RelatedWhen i install my Corel draw 12 from cd it crashes when i use a tool
I remember that i needed to update it but those updates are gone from the Corel .com site
Corel 10 works fine. Where I can get the updates,
My version of build is 12.0.0.458
We have X5 installed on four computers at work and on two of the machines (including mine) X5 will crash everytime (100%) when trying to export to jpg. It does not even get as far as a dialog box its just crashes straight away. I it does this everytime on two comuters without fail.
Is there a way of viewing an error report? Or what would I have to do to file one?
I can export to other formats just fine, it only seems to be JPG....
I am running windows 7 and X5 SP2
It's concerning the font SF Movie Poster
Two machines, both with XP, Corel Draw X3 13.0.0.576 and SF Movie Poster installed - BUT two different outputs.
Both Corels open the file and the characters with SF Movie Poster (I checked it by clicking in the words)
e.g. figure 1:
The first machine shows the number one as The other machine shows it like 1
I am new to Corel Draw. How do I arc font? I have a customer that wants some writting arced above her logo and below her logo. The only way I know how is to creat a circle and "Fit Text To Path". But then I can't seem to delete the circle without erasing the writting as well.
View 7 Replies View RelatedCan we stop the orange update text bar from appearing in X6?
"The best thing about learning is that it never stops, and the rabbit hole will go as deep as you let it [URL]....
When you right click on a divider bar on the menu you used to have a option to import or export the work space,now it looks like the screen shot on the right. ( I didn't have a screen shot of X6, but it looked a lot like the X4.)Why does things that work well in CorelDRaw keep getting changed?
View 6 Replies View RelatedI have a client, who have a CorelDraw X6 software. After a virus attack I try to reinstall and upgrade to the software. The installation went well, but the the 4th update has failed:
View 3 Replies View RelatedI upgraded to x5 from corel 11 last year. Crashes frequently and corrupts file. I have to make copy after copy to keep from loosing all of my work. I am at the point I can not do my work. Sometimes files just become so slow and then just crash. I can take the same file that is slow, save as ver 11 and open in corel draw 11 and works great. I have never had so many problems with a program in my life. I am now downloading hotfix 4 and service pack 3 and will install, but I am not very optimistic.
There is not particular situation that the files cause the program to crash. It is nothing that complex. Seems to be often when I try to save or when I have multi pages.
Here is my system info.
Operating System MS Windows 7 64-bit SP1CPU Intel Core i3/i5/i7 @ 2.10GHz 52 °C Sandy Bridge 32nm TechnologyRAM 3.93 GB Single-Channel DDR3 @ 665MHz (9-9-9-24)Motherboard Hewlett-Packard 167C (CPU 1) 51 °CGraphics Generic PnP Monitor (1366x768@60Hz) Intel(R) HD Graphics FamilyHard Drives 313GB TOSHIBA TOSHIBA MK3261GSYN (SATA)
I've got Service Pack 3 which is the latest and greatest and am still finding that I cannot export to any bitmap format even in PhotoPaint. I can save as a .cpt file in PhotoPaint. Sometimes I send out .jpeg proofs and doesn't matter whether it is X5 Draw or PhotoPaint, it crashes.
I do not have this problem when I export the same thing from X4 Draw or PhotoPaint.
I am running XP on a virtualized Windows environment via Parallels desktop for Mac. I have plenty of RAM and hard drive space so it may be because I am not running Windows 7?
When copying text from web pages to CDX6 it will often crash on paste. A workaround is to copy to Word first but I'd rather CDR worked properly. Is there anything I could look at within CDR to stop this from happening?
Version 16.2.0.998 on 64bit, Win 7.
Photo-Paint crashes when saving twice out of three times...
When I edit a bitmap object from Draw, I always have to start my editing over and over.I lose my object. So...I do a workaround...I export the selected object, open it in Photo-Paint to edit it.
When saving...same thing. Except, the file saves properly. It's just that Photo-Paint crashes.
It used to do that with my older X4 version as well...I skipped the X5 and when on to the X6.
It still crashes, but even more...thing is...Both programs were installed on two different computers.
I'm running Coreldra X4 on a windows vista machine. Lately I started having a courious problem with Coreldraw x4. When a try to open a cdr file before opening CDX4 i get an error message saying that the file dos not exist. after this CDX4 crashes.
On the other side if I open CDX4 and then try to open the very same cdr file everything is ok.
I successfully installed CorelDraw X6 but I am unable to open it. It starts to load and then it crashes. At first I thought it was a bad install, so I uninstalled and reinstalled and it still won't open. Norton AV was turned off during both installs. I have searched and see that quite a few users have the same problem but I haven't found a cause or solution. I'm using Windows 7 64 bit, Intel i7, 16 GB ram.
View 13 Replies View RelatedI have just ugraded 4 computers to X5 (one w7, 3 with XP) and are having a lot of problems with the application crashing or hanging. Applies to all computers. We do a lot of print merges, more than 100 a day. Happens randomly, but mainly after several jobs have been printed (jobs, 5-10, still open in X5 in case som modifications are needed).
View 3 Replies View RelatedCORELDRAW 12 crashes on opening files.. I get the crash wisdard saying it is unstable..
it worked a few hours ago... this is my work computer. i use program to make silk screens
I am running windows 7
Problem signature: Problem Event Name: APPCRASH Application Name: CorelDRW.exe Application Version: 12.0.0.458 Application Timestamp: 3fced9b6 Fault Module Name: CdrSty.dll Fault Module Version: 1.0.0.458 Fault Module Timestamp: 3fceecf3 Exception c0000005 Exception Offset: 000091c1 OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 1033 Additional Information 1: 9779 Additional Information 2: 9779cefde9fcb36e63d4c28219879671 Additional Information 3: 537f Additional Information 4: 537f578d5c430251a71245316ee5988f
is it the CdrSty.dll file i need to reinstall. where to find and how to install
i did find a ziped copy of CdrSty.dll but do not know where to place it..
yes i put in the orignial disk and try to repair it severial times..( said it installed all i needed)
unistalled the program and reinstalled it vie: the original disk several times and still no go.
We have CorelDRAW Graphics Suite X5 installed on a Windows XP SP3 32-bit machine and when attempting to export a CorelDRAW file to anything (i.e. JPG), the applications crashes after the export dialog box opens. This happens for any file we try to export.
We have reset the workspace using F8, but it did not resolve the issue.
Exporting the same file in CorelDRAW X4 or even X3 works perfectly, this is only an issue with X5.
I have the entire subscription of 'Corel 6X'. I have been using it for a few months with no problems, even after I did the 8.1 update. Now all programs will load and run except for 'Draw 6X', it starts to load and then it will start to 'load environment' and then crash. As I said above, every other part of the suite open and run fine.
I can give you no information about updates or version as it won't load so I could check for updates. I searched for other post, and it returned no other similar problems listed for 'Draw 6X'. If I get no answers I'll just un/re install that program itself and see if that fixes things.
I am on a Dell PC with plenty of everything running Win 8.1 64 bit and running the online yearly subscription of 'CorelDraw 6X' 64 bit version that was up to date and working fine on 8.1 fine for more than a month. Now the 'splash' screen shows and gets to 'loading environment' and then the quaint Win window comes out 'There is a problem and windows has to close this program'.
"The only way is through!"cb'99'
Corel Crashes after I applied the updates 1-3 & 4 in CorelDRAW X5.
Every time I go to combine a powerclip (basically recombine a previously broken apart powerclip) Corel Crashes. Again, there were no issues until I installed the hot fix (SP 3 & 4)Operating System: Windows 7 Ultimate 64bit, 16gb Ram, 280gb solid state drive..net Framework is all up to date.I sit here all day designing websites.
If I create some text and change it from the default size (24 pt) to 14 pt and then rotate it, the size changes to the default point size (24 pt, I have even seen it do ~17.54)
Appears to have manifested with v16.4
It also squishes the text...
I have more than 1000 installed on an xp system. I know I don't need this many. I'm sure I could get by with 400 or less. How do you thin down your fonts? How many do you try to keep on your system?
What are you using for font management? Bit stream? Something else?
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
