CorelDRAW Graphics Suite X6 :: Will Not Open - Crashes Before Loading?
Jun 30, 2012
I successfully installed CorelDraw X6 but I am unable to open it. It starts to load and then it crashes. At first I thought it was a bad install, so I uninstalled and reinstalled and it still won't open. Norton AV was turned off during both installs. I have searched and see that quite a few users have the same problem but I haven't found a cause or solution. I'm using Windows 7 64 bit, Intel i7, 16 GB ram.
View 13 Replies
ADVERTISEMENT
Dec 27, 2013
I have the entire subscription of 'Corel 6X'. I have been using it for a few months with no problems, even after I did the 8.1 update. Now all programs will load and run except for 'Draw 6X', it starts to load and then it will start to 'load environment' and then crash. As I said above, every other part of the suite open and run fine.
I can give you no information about updates or version as it won't load so I could check for updates. I searched for other post, and it returned no other similar problems listed for 'Draw 6X'. If I get no answers I'll just un/re install that program itself and see if that fixes things.
I am on a Dell PC with plenty of everything running Win 8.1 64 bit and running the online yearly subscription of 'CorelDraw 6X' 64 bit version that was up to date and working fine on 8.1 fine for more than a month. Now the 'splash' screen shows and gets to 'loading environment' and then the quaint Win window comes out 'There is a problem and windows has to close this program'.
"The only way is through!"cb'99'
View 3 Replies
View Related
Jun 17, 2009
I'm running Coreldra X4 on a windows vista machine. Lately I started having a courious problem with Coreldraw x4. When a try to open a cdr file before opening CDX4 i get an error message saying that the file dos not exist. after this CDX4 crashes.
On the other side if I open CDX4 and then try to open the very same cdr file everything is ok.
View 5 Replies
View Related
Aug 9, 2011
So I wrote this script last night, well recorded it in Corel really
Sub NewDoc() ' ' Recorded 8/8/2011 ' ' Description: ' ' Dim doc1 As Document Set doc1 = CreateDocument() doc1.MasterPage.SetSize 11#, 8.5 With doc1.MasterPage .Orientation = cdrLandscape .PrintExportBackground = False .Bleed = 0# .Background = cdrPageBackgroundSolid .Color.CMYKAssign 0, 0, 0, 5 End WithEnd Sub
Mainly used to open a new document and make the layout background solid and non printable. I really like this feature since I work with the color white a lot, however I could not find any setting to start new documents with anyway. The macro creates a new doc and changes the layout setting to what I like, but when i run it with no documents open, the only menus i get are File View Tools.
View 5 Replies
View Related
May 7, 2013
having trouble transferring image to cut studio for opaque transfer paper to be cut on Roland after. Do I need to convert the file to bitmap then open the CutStudio? When I do, it does not appear. If I leave it as vector it does, but I cannot get the option to outline object or use the print/cut setttings. I seem to be missing some steps.
View 1 Replies
View Related
Jun 6, 2013
When i install my Corel draw 12 from cd it crashes when i use a tool
I remember that i needed to update it but those updates are gone from the Corel .com site
Corel 10 works fine. Where I can get the updates,
My version of build is 12.0.0.458
View 3 Replies
View Related
Mar 17, 2011
We have X5 installed on four computers at work and on two of the machines (including mine) X5 will crash everytime (100%) when trying to export to jpg. It does not even get as far as a dialog box its just crashes straight away. I it does this everytime on two comuters without fail.
Is there a way of viewing an error report? Or what would I have to do to file one?
I can export to other formats just fine, it only seems to be JPG....
I am running windows 7 and X5 SP2
View 2 Replies
View Related
May 15, 2012
I upgraded to x5 from corel 11 last year. Crashes frequently and corrupts file. I have to make copy after copy to keep from loosing all of my work. I am at the point I can not do my work. Sometimes files just become so slow and then just crash. I can take the same file that is slow, save as ver 11 and open in corel draw 11 and works great. I have never had so many problems with a program in my life. I am now downloading hotfix 4 and service pack 3 and will install, but I am not very optimistic.
There is not particular situation that the files cause the program to crash. It is nothing that complex. Seems to be often when I try to save or when I have multi pages.
Here is my system info.
Operating System MS Windows 7 64-bit SP1CPU Intel Core i3/i5/i7 @ 2.10GHz 52 °C Sandy Bridge 32nm TechnologyRAM 3.93 GB Single-Channel DDR3 @ 665MHz (9-9-9-24)Motherboard Hewlett-Packard 167C (CPU 1) 51 °CGraphics Generic PnP Monitor (1366x768@60Hz) Intel(R) HD Graphics FamilyHard Drives 313GB TOSHIBA TOSHIBA MK3261GSYN (SATA)
View 14 Replies
View Related
Jul 27, 2011
I've got Service Pack 3 which is the latest and greatest and am still finding that I cannot export to any bitmap format even in PhotoPaint. I can save as a .cpt file in PhotoPaint. Sometimes I send out .jpeg proofs and doesn't matter whether it is X5 Draw or PhotoPaint, it crashes.
I do not have this problem when I export the same thing from X4 Draw or PhotoPaint.
I am running XP on a virtualized Windows environment via Parallels desktop for Mac. I have plenty of RAM and hard drive space so it may be because I am not running Windows 7?
View 4 Replies
View Related
Jan 31, 2013
When copying text from web pages to CDX6 it will often crash on paste. A workaround is to copy to Word first but I'd rather CDR worked properly. Is there anything I could look at within CDR to stop this from happening?
Version 16.2.0.998 on 64bit, Win 7.
View 3 Replies
View Related
Oct 1, 2013
Photo-Paint crashes when saving twice out of three times...
When I edit a bitmap object from Draw, I always have to start my editing over and over.I lose my object. So...I do a workaround...I export the selected object, open it in Photo-Paint to edit it.
When saving...same thing. Except, the file saves properly. It's just that Photo-Paint crashes.
It used to do that with my older X4 version as well...I skipped the X5 and when on to the X6.
It still crashes, but even more...thing is...Both programs were installed on two different computers.
View 4 Replies
View Related
Apr 7, 2011
I have just ugraded 4 computers to X5 (one w7, 3 with XP) and are having a lot of problems with the application crashing or hanging. Applies to all computers. We do a lot of print merges, more than 100 a day. Happens randomly, but mainly after several jobs have been printed (jobs, 5-10, still open in X5 in case som modifications are needed).
View 3 Replies
View Related
Jul 16, 2013
CORELDRAW 12 crashes on opening files.. I get the crash wisdard saying it is unstable..
it worked a few hours ago... this is my work computer. i use program to make silk screens
I am running windows 7
Problem signature: Problem Event Name: APPCRASH Application Name: CorelDRW.exe Application Version: 12.0.0.458 Application Timestamp: 3fced9b6 Fault Module Name: CdrSty.dll Fault Module Version: 1.0.0.458 Fault Module Timestamp: 3fceecf3 Exception c0000005 Exception Offset: 000091c1 OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 1033 Additional Information 1: 9779 Additional Information 2: 9779cefde9fcb36e63d4c28219879671 Additional Information 3: 537f Additional Information 4: 537f578d5c430251a71245316ee5988f
is it the CdrSty.dll file i need to reinstall. where to find and how to install
i did find a ziped copy of CdrSty.dll but do not know where to place it..
yes i put in the orignial disk and try to repair it severial times..( said it installed all i needed)
unistalled the program and reinstalled it vie: the original disk several times and still no go.
View 14 Replies
View Related
Apr 14, 2010
We have CorelDRAW Graphics Suite X5 installed on a Windows XP SP3 32-bit machine and when attempting to export a CorelDRAW file to anything (i.e. JPG), the applications crashes after the export dialog box opens. This happens for any file we try to export.
We have reset the workspace using F8, but it did not resolve the issue.
Exporting the same file in CorelDRAW X4 or even X3 works perfectly, this is only an issue with X5.
View 11 Replies
View Related
Mar 13, 2012
Corel Crashes after I applied the updates 1-3 & 4 in CorelDRAW X5.
Every time I go to combine a powerclip (basically recombine a previously broken apart powerclip) Corel Crashes. Again, there were no issues until I installed the hot fix (SP 3 & 4)Operating System: Windows 7 Ultimate 64bit, 16gb Ram, 280gb solid state drive..net Framework is all up to date.I sit here all day designing websites.
View 15 Replies
View Related
Jan 17, 2013
my corel crashing every time I try to select the color palette menu in the window dropdown, try to change the palette in the solid fill color window, and also in the outline color window. I have tried changing the color preset, reinstalling, resetting to defaults, am updated to the newest version (15.2.0.686), installing the hot fixes, blah, blah blah....... everything.
Win7 sp1, 12 gigs ram, i5 64 bit.
View 6 Replies
View Related
Jan 5, 2013
I have been working in this file for weeks, but now I did the sp2 update and when I try to open the file, the font substitution dialogue box opens. No matter which option I select, it causes the program to crash and close.
View 1 Replies
View Related
May 12, 2013
X6 becomes very unstable when using fills with vector patterns. There is, for whatever reason, a lower limit for the size of the pattern (1 inch) that is way to high for most textures, so the only way to work around is to calculate the wanted size of the pattern tiles, enlarge the object accordingly, fill it, assign the size with object attribute and renormalize the size of the object. This used to work fine in prior versions, but X6.3 already crashed several times instantly or soon after the procedure at my site. This is not amusing.
Is there maybe another way to get past the silly one inch pattern size limit?
used hardware: Dell Precision T-7500 workstation / Xeon 5680 6core @ 3.3Ghz / AMD Firepro 8800 / 16 GB RAM / Win7x64
View 9 Replies
View Related
Mar 28, 2013
I cleared the temp/cache on my Windows 7 64 bit that has been running CorelDraw Suite 6 since its release. Never an issue. Now, after installing the latest upgrade the program Coreldraw loads just fine and it opened my most current file. After changing a letter in the text box the program crashes. You get a popup window that Coreldraw has closed. I rebooted my machine and it does this each time the program is reloaded.
I went through the common causes of Coreldraw issues and nothing is left to remove or change. Clearly the latest upgrade is flawed and instead of fixing performance issues it has created one that stops the program from working.
I upgraded another computer and the same issue appears after the upgrade. I did a system recovery and now Coreldraw will not open .cdr files into Coreldraw. It now shows a filter error and no file will open.
View 9 Replies
View Related
Nov 30, 2012
When I go to open the displace filter it just crashes .
View 2 Replies
View Related
Aug 19, 2011
I recently bought a new laptop with Windows 7 64 bit OS, and installed the CorelDraw X5(worked fine on an older XP machine) on it, the application crashes every time when the progress showing "Creating Application Environment". I tried to run it under XP compatible mode, tthe only difference is now the Regstration works, but the app still crashes every time.
View 1 Replies
View Related
Nov 13, 2011
when you export any size graphic as a jpg (selected only or not) the dialogue box comes up empty, completely! when i go to close it, it crashes corel. If I tick the donot show filter dialogue box It makes a jpg image but i have no control over the settings. It works when I export to bmp! this is getting frustrating as I often have to jpeg some graphics for customers.
View 11 Replies
View Related
Mar 24, 2012
Corel X4, still installed on my PC, has no problem at all.But Corel X6 (CorelDRAW as well as CorelPHOTOPAINT) crashes after the preview scan with Epson Scan (EPSON Perfection V330 Photo) in professional mode. When I use the simple mode (which does all automatically: preview scan, border recognition, best guess about resolution and color mode and the final scan) there also is no problem.
But I wonder what the TWAIN driver does with Corel X6 after having finished the preview scan ..I already tried to uninstall and reinstall the (latest) driver suite from EPSON without success.
View 1 Replies
View Related
Mar 16, 2013
Today i started to experience this crash while moving multiple grouped objects. These objects were from a powertrace and had transparency. this is on vista 64bit. doesn't happen all the time.
Problem signatureProblem Event Name: APPCRASHApplication Name: CorelDRW.exeApplication Version: 16.2.0.998Application Timestamp: 50b2a2e4Fault Module Name: CdrTra.dllFault Module Version: 16.2.0.998Fault Module Timestamp: 50b2a50fException c0000005Exception Offset: 000000000003b757OS Version: 6.0.6002.2.2.0.256.6Locale ID: 1033Extra information about the problemBucket ID: 94246814
View 10 Replies
View Related
Aug 23, 2012
Starting with X4, I had been using the macro collection "wx_showLayer.gms" found here: URL.... The most useful of those macros is one that automatically makes the layer a newly selected object is on the currently active layer, rigt upon clicking the object. Working with layers a lot, I got pretty much used to that feature; keeping copies of objects on the same layer, for example, can be achieved blindly this way.
For X6 / x64, I had to modify a variable declaration but then the macro worked flawlessly as it did in 32-bit X4. After the service pack / update 6.1, the macro still loaded without a hitch. But soon I found it was the cause for regular crashes which occurred after clicking objects oner two times, or invariably at changing the page. -- Removed the macro from the GMS folder and X6.1 runs like a champ (so far).
View 9 Replies
View Related
Jul 26, 2013
After updating silverfast software to a newer version then SF-8.0.1r24(AFL)_x86, Corel X5 and X6 did crash when opening a file.
It didn't uninstall Silverfast or to reiinstall Corel X5 or X6.
Only reloading th whole computer (Windows 7 Pro) from an earlier image did work. But when installing the silverfast Update, the same thing happened.
Silverfast says, they don't install anything into Corel suite. I should ask Corel about the problem ...
Everything else keeps running fine after the silverfast update.
View 3 Replies
View Related
Oct 28, 2009
I have a big problem with CorelDraw X4. When there is multiple pages in one document, and I go to print, it do preflight. If I change print range, or enter printer properties during preflight, program crashes without any warning, and I lose all opened documents.
View 2 Replies
View Related
Nov 29, 2012
Regarding the conversion of some WinAPI fucntions to 64 bit.Been banging my head on this one for a while. I just can't seem to get it right no matter what I try.I think I have converted everything but it still crashes X6 after a few scrolls of the list box. I think it is corrupting the stack but I'm not sure how to fix it. "The best thing about learning is that it never stops, and the rabbit hole will go as deep as you let it.
View 3 Replies
View Related
Aug 27, 2011
I have CorelDRAW X4, when I open some file(s), which takes long time to open, even which file size is smaller or bigger.
View 1 Replies
View Related
May 1, 2012
When designing brochures in X5, we quite often will save a file with no issues, but when we go to re-open it we end up with "encountered an improper arument" error message and the file is no longer able to be opened.
If you try to open the backup it comes up with a "runtime error" and won't open either. We are running Windows 7
View 3 Replies
View Related
Feb 6, 2013
In Corel draw, I click file, open, and the location is not the folder I want. I have created shortcuts. How to change this.
View 3 Replies
View Related
