CorelDRAW Graphics Suite X6 :: Crashes Unexpectedly When Moving Multiple Objects
Mar 16, 2013
Today i started to experience this crash while moving multiple grouped objects. These objects were from a powertrace and had transparency. this is on vista 64bit. doesn't happen all the time.
Problem signatureProblem Event Name: APPCRASHApplication Name: CorelDRW.exeApplication Version: 16.2.0.998Application Timestamp: 50b2a2e4Fault Module Name: CdrTra.dllFault Module Version: 16.2.0.998Fault Module Timestamp: 50b2a50fException c0000005Exception Offset: 000000000003b757OS Version: 6.0.6002.2.2.0.256.6Locale ID: 1033Extra information about the problemBucket ID: 94246814
View 10 Replies
ADVERTISEMENT
Jan 25, 2013
I often need to move (a group of) objects on a page, but with those objects I also need to move the guidelines that belong to this object. Is there a way I can lock guidelines to an object so that if I move the object, these guidelines move with it?
View 5 Replies
View Related
Sep 17, 2013
I've been exploring migrating my Design and PrePress departments away from Illustrator & Flexi and transitioning to Corel. Unfortunately I've hit a major stumbling block
Right now I have a team of designers laying out sign designs. They draw each sign and we generate a message schedule for those signs in excel. From there, we've been able to use the print merge function in Corel to transfer all the messages from the data sheet to the signs. The problem is, each sign is placed on a separate page within the Corel file. I know you can then use print imposition to gang those signs for printing...but the problem is we have a laser engraver, rotary engravers and routers that are all being run. I've fairly certain we could "print" to the laser without any issues but I'm not as confident regarding the other machines.
Typically once we have the drawings of every sign created (currently doing this in Flexi), we have programmers that gang all similar components together on files that are used to power the rotary engravers. Because the print merge function in Corel puts each sign on a separate page, I'm not sure how we'd be able to transition without having to copy, paste and place each sign back on to a single page. Our jobs often run into the hundreds of signs so the extra labor required would kill any savings such a transition might bring us.
Is there a way to combine pages post print-merge, to get all the objects on a single page? I had really hoped to be able to gang all objects together on a single page within a single file.
View 3 Replies
View Related
Sep 27, 2011
How can set that an object only moves per 1 pixel increments when moving using the arrows keys?I am designing a few web banners right now and when i move objects with the arrow keys to have them placed exactly, they jump with more then 60 pixels in one go making this exercise a bit useless.
View 3 Replies
View Related
Jul 26, 2011
I have a series of images that have been designed - very basic shapes (a straight vertical line with a ball on top in which ascending numbers are placed in each one. So effectively each image is made up of 3 seperate parts and look like numbered lollipops. Each of these images are currently evenly spaced apart and formatted so the text is all properly aligned and sized etc - I would like to be able to copy certain groups of these images and paste them into a new working document which is fine, but I then need to somehow re-space them out to scale once they've been pasted in. So for example i have copied them in and they are 20mm apart to each other (as per my original drawing that i copied from) - is there a way of then altering this spacing so that for example so that they are all 33mm apart but still retail the original formatting properties so they are not stretched etc?
View 11 Replies
View Related
Dec 10, 2010
I can't seem to select more than one text object at a time.....
I will select a paragraph or artistic text object, press and hold shift, and then continue selecting text objects. Nothing happens.... well, it seems to be 'thinking' but nothing ever happens until I release the shift key and then only the last object selected gets highlited.
View 6 Replies
View Related
Aug 24, 2011
I find it extremely annoying to have to Ungroup named groups and then regroup and rename them in order to do a multiple selection of group members. I find I'm constantly ungrouping and regrouping in order to select/edit.
Note that the multiple items are often not the same type of object (e.g., text, line, shape, etc.).
View 3 Replies
View Related
Nov 18, 2013
With a number of of paragraph text objects selected, the interactive rotate becomes increasingly sluggish in keeping up with my mouse position when dragging round. I've got a calendar artwork with 12 paragraph objects, and after I've let go of the mouse button, the screen will continue trying to update for anything up to 10 seconds afterwards, during which time I can't do anything.
View 6 Replies
View Related
Jan 7, 2013
I was just fooling around with it one day and I made 2 guidlines intersect (one at 0 degrees and one at 90). I added a third one at 45 and tried to center it at the intersection of the first 2. It made a tiny tiny microscopic right triangle for some reason.
Also, sometimes the center is off on either the object or on the page. Like when I rotate copies of an object around another object (like making a clock face) the copies don't go perfectly all the way around. I redo it and it works fine.
Is precision an issue in CoreDRAW?
View 1 Replies
View Related
Aug 18, 2011
I often produce graphics in CorelDRAW, export it as en eps file and insert it inside a MS Word document as an image and finally convert it to pdf. This way my vector graphics (often linedrawings with or without fill) usually is preserved in the final pdf document. I can zoom in and the lines keep on displaying perfectly sharp. This is important, since it easily looks bad when thin lines are turned into bitmaps, even when watched from a distance.
Now, in some graphics I created today, I had a circle with fountain fill and outline (symbolizing a sphere) put behind a filled rectangle, which had a uniform transparency applied to it. In the resulting pdf file, the 'sphere' was turned into bitmap. Inside CorelDRAW everything was vector graphics, but something was loast in the process. what happens with the graphics in the different steps in the process and eventually could explain a workaround to make everything look as vector in the final pdf file.
View 14 Replies
View Related
Nov 8, 2011
in coreldraw usually on small files having 7 to 8 pages i move pages by dragging its tab on the desired location. but how do i handle large files for eg moving page 49 before 15? the tabs list gets pretty long.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
View 3 Replies
View Related
Jun 6, 2013
When i install my Corel draw 12 from cd it crashes when i use a tool
I remember that i needed to update it but those updates are gone from the Corel .com site
Corel 10 works fine. Where I can get the updates,
My version of build is 12.0.0.458
View 3 Replies
View Related
Mar 17, 2011
We have X5 installed on four computers at work and on two of the machines (including mine) X5 will crash everytime (100%) when trying to export to jpg. It does not even get as far as a dialog box its just crashes straight away. I it does this everytime on two comuters without fail.
Is there a way of viewing an error report? Or what would I have to do to file one?
I can export to other formats just fine, it only seems to be JPG....
I am running windows 7 and X5 SP2
View 2 Replies
View Related
Sep 1, 2011
I have this script that basically makes a shape expand by adding an outline, conveting the outline to an object, and then welding the whole thing together.
I have the script set to execute with hotkey ctrl+numpad+
The odd thing is, when I run it once, it seems to work fine and only one object is left, but when I hold down ctrl and press numoad+ over and over again, it seems to produce a new copy of the object everytime.
I'm not sure why this is happening, but I need to get it to stop.
Sub Expand() EventsEnabled = False 'Dim vars Dim c1 As New Color Dim OrigSelection As ShapeRange Dim OrigColor As Shape Dim width1 As Double Dim height1 As Double Dim minSize As Double Dim Thickness As Double 'copy color of current selection Set OrigColor = ActiveShape If OrigColor Is Nothing Then Exit Sub If OrigColor.Fill.Type <> cdrUniformFill Then Exit Sub c1.CopyAssign OrigColor.Fill.UniformColor 'get thickness to increase by Set OrigSelection = ActiveSelectionRange OrigSelection.GetSize width1, height1 If width1 <= height1 Then minSize = width1 If width1 > height1 Then minSize = height1 Thickness = minSize * 0.035 OrigSelection.SetOutlineProperties Color:=CreateRGBColor(0, 0, 0) OrigSelection.SetOutlineProperties Thickness, ScaleWithShape:=True 'weld Dim s1 As Shape Set s1 = OrigSelection(1).Outline.ConvertToObject Dim s2 As Shape Set s2 = s1.Weld(OrigSelection(1), True, True) 'auto reduce 's2.Curve.Nodes.All.AutoReduce 0.001 's2.Fill.ApplyUniformFill c1 'delete remnants OrigSelection.Delete s1.Delete 'OrigColor.Delete EventsEnabled = TrueEnd Sub
View 5 Replies
View Related
Mar 11, 2011
in Draw X5
when I click on an object from the object manager... then I want it at the top of my drawing
so I hit Shift+PageUp
(or Ctrl+PageUp)
instead of working... it takes me to "Page 1" at the top of the object manager
HOWEVER, if I click on the thing from the canvas, it works...
this is a silly bug... the whole point of me selecting it from the object manager is so I don't have to hunt for it... because it's UNDER some other stuff.
... that's why I want it shifted to the top of the layer.
As far as I know this problem is reproducible... I'm using a circle and it's under a bunch of stuff like rectangles. I can be more specific if necessary, but it's pretty basic.
View 14 Replies
View Related
Mar 9, 2013
I have Corel X-5 on one of my computers that uses XP- Pro and I have new computer that is using windows 7 which also has Corel X-5 on it.
I have certain fonts loaded on the Corel X-5 that is using XP and I want to move them to the new computer. There are about 200 fonts and I was wondering the best way to move them into Corel X5 that is using Windows 7
Can I just copy them to a flash drive and then install on the new computer.
The reason I am using two computers with one monitor is one of my Roland Printers will work with windows 7 but the rip software will not work with Windows 7 because there are no Windows 7 drivers for it.
Instead of spending a few thousand dollars for new rip software it is easier to just use Windows XP and even thought it is a bit of a pain to keep switching back and forth from computers for now it works just fine.
View 2 Replies
View Related
Aug 23, 2011
UA problem.cdr
Sometimes when I try to copy and paste a logo, that has text around the outside of it, the text will move from its original location. How do I get this to stop? I have attached a file that is currently doing this.
View 11 Replies
View Related
May 15, 2012
I upgraded to x5 from corel 11 last year. Crashes frequently and corrupts file. I have to make copy after copy to keep from loosing all of my work. I am at the point I can not do my work. Sometimes files just become so slow and then just crash. I can take the same file that is slow, save as ver 11 and open in corel draw 11 and works great. I have never had so many problems with a program in my life. I am now downloading hotfix 4 and service pack 3 and will install, but I am not very optimistic.
There is not particular situation that the files cause the program to crash. It is nothing that complex. Seems to be often when I try to save or when I have multi pages.
Here is my system info.
Operating System MS Windows 7 64-bit SP1CPU Intel Core i3/i5/i7 @ 2.10GHz 52 °C Sandy Bridge 32nm TechnologyRAM 3.93 GB Single-Channel DDR3 @ 665MHz (9-9-9-24)Motherboard Hewlett-Packard 167C (CPU 1) 51 °CGraphics Generic PnP Monitor (1366x768@60Hz) Intel(R) HD Graphics FamilyHard Drives 313GB TOSHIBA TOSHIBA MK3261GSYN (SATA)
View 14 Replies
View Related
Jul 27, 2011
I've got Service Pack 3 which is the latest and greatest and am still finding that I cannot export to any bitmap format even in PhotoPaint. I can save as a .cpt file in PhotoPaint. Sometimes I send out .jpeg proofs and doesn't matter whether it is X5 Draw or PhotoPaint, it crashes.
I do not have this problem when I export the same thing from X4 Draw or PhotoPaint.
I am running XP on a virtualized Windows environment via Parallels desktop for Mac. I have plenty of RAM and hard drive space so it may be because I am not running Windows 7?
View 4 Replies
View Related
Jan 31, 2013
When copying text from web pages to CDX6 it will often crash on paste. A workaround is to copy to Word first but I'd rather CDR worked properly. Is there anything I could look at within CDR to stop this from happening?
Version 16.2.0.998 on 64bit, Win 7.
View 3 Replies
View Related
Oct 1, 2013
Photo-Paint crashes when saving twice out of three times...
When I edit a bitmap object from Draw, I always have to start my editing over and over.I lose my object. So...I do a workaround...I export the selected object, open it in Photo-Paint to edit it.
When saving...same thing. Except, the file saves properly. It's just that Photo-Paint crashes.
It used to do that with my older X4 version as well...I skipped the X5 and when on to the X6.
It still crashes, but even more...thing is...Both programs were installed on two different computers.
View 4 Replies
View Related
Jun 17, 2009
I'm running Coreldra X4 on a windows vista machine. Lately I started having a courious problem with Coreldraw x4. When a try to open a cdr file before opening CDX4 i get an error message saying that the file dos not exist. after this CDX4 crashes.
On the other side if I open CDX4 and then try to open the very same cdr file everything is ok.
View 5 Replies
View Related
Jun 30, 2012
I successfully installed CorelDraw X6 but I am unable to open it. It starts to load and then it crashes. At first I thought it was a bad install, so I uninstalled and reinstalled and it still won't open. Norton AV was turned off during both installs. I have searched and see that quite a few users have the same problem but I haven't found a cause or solution. I'm using Windows 7 64 bit, Intel i7, 16 GB ram.
View 13 Replies
View Related
Apr 7, 2011
I have just ugraded 4 computers to X5 (one w7, 3 with XP) and are having a lot of problems with the application crashing or hanging. Applies to all computers. We do a lot of print merges, more than 100 a day. Happens randomly, but mainly after several jobs have been printed (jobs, 5-10, still open in X5 in case som modifications are needed).
View 3 Replies
View Related
Jul 16, 2013
CORELDRAW 12 crashes on opening files.. I get the crash wisdard saying it is unstable..
it worked a few hours ago... this is my work computer. i use program to make silk screens
I am running windows 7
Problem signature: Problem Event Name: APPCRASH Application Name: CorelDRW.exe Application Version: 12.0.0.458 Application Timestamp: 3fced9b6 Fault Module Name: CdrSty.dll Fault Module Version: 1.0.0.458 Fault Module Timestamp: 3fceecf3 Exception c0000005 Exception Offset: 000091c1 OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 1033 Additional Information 1: 9779 Additional Information 2: 9779cefde9fcb36e63d4c28219879671 Additional Information 3: 537f Additional Information 4: 537f578d5c430251a71245316ee5988f
is it the CdrSty.dll file i need to reinstall. where to find and how to install
i did find a ziped copy of CdrSty.dll but do not know where to place it..
yes i put in the orignial disk and try to repair it severial times..( said it installed all i needed)
unistalled the program and reinstalled it vie: the original disk several times and still no go.
View 14 Replies
View Related
Apr 14, 2010
We have CorelDRAW Graphics Suite X5 installed on a Windows XP SP3 32-bit machine and when attempting to export a CorelDRAW file to anything (i.e. JPG), the applications crashes after the export dialog box opens. This happens for any file we try to export.
We have reset the workspace using F8, but it did not resolve the issue.
Exporting the same file in CorelDRAW X4 or even X3 works perfectly, this is only an issue with X5.
View 11 Replies
View Related
Dec 27, 2013
I have the entire subscription of 'Corel 6X'. I have been using it for a few months with no problems, even after I did the 8.1 update. Now all programs will load and run except for 'Draw 6X', it starts to load and then it will start to 'load environment' and then crash. As I said above, every other part of the suite open and run fine.
I can give you no information about updates or version as it won't load so I could check for updates. I searched for other post, and it returned no other similar problems listed for 'Draw 6X'. If I get no answers I'll just un/re install that program itself and see if that fixes things.
I am on a Dell PC with plenty of everything running Win 8.1 64 bit and running the online yearly subscription of 'CorelDraw 6X' 64 bit version that was up to date and working fine on 8.1 fine for more than a month. Now the 'splash' screen shows and gets to 'loading environment' and then the quaint Win window comes out 'There is a problem and windows has to close this program'.
"The only way is through!"cb'99'
View 3 Replies
View Related
Mar 13, 2012
Corel Crashes after I applied the updates 1-3 & 4 in CorelDRAW X5.
Every time I go to combine a powerclip (basically recombine a previously broken apart powerclip) Corel Crashes. Again, there were no issues until I installed the hot fix (SP 3 & 4)Operating System: Windows 7 Ultimate 64bit, 16gb Ram, 280gb solid state drive..net Framework is all up to date.I sit here all day designing websites.
View 15 Replies
View Related
Oct 8, 2013
greg-basco-rainforest-macro-11.jpg
how to create an image to make it look like its in motion? I am trying to create an image of an arm at 45 degrees that rotates another 45 degrees that shows motion (I know the attached file is not very useful but it is the same style of motion on the butterfly's wings that I am after).
Usually the starting image is a very faint colour and the last should be solid colour but is there a way to blur/blend the colours in between to show where the image originally was and where it is now?
View 5 Replies
View Related
Mar 20, 2013
I have been using Corel for over 20 years, and have never needed support. I do most of my work editing nodes within a drawing for creating continuous line patterns that are repeatable.
For years I have simple "nudged" the first and last point of a complex curve to the appropriate position. Now I want to simplify that by entering in the coordinates for the node.
I have tried Object Coordinates, but it appears to do nothing after I change the node location, or radically change my design. There is no documentation for it. I have searched Customize for some sort of input field to add to the toolbar with no luck.
I always have to add the information on the coordinates of the selected note to the Status Bar, so I am surprised that I can't find an option for editing the position.
View 5 Replies
View Related
Dec 17, 2013
Moving Object Forward and Behind Images constant PROBLEMS . we have a built in scale spinner in corel draw giving us the
Ability to pretty much work in infinity working area, why is it that we are constrained only to page area to cycle objects forward and back of other objects, why is it that I can move my logo behind bitmap within the working area but quite often can not do the same outside the working area.
it always disrupts the workflow, sometimes it seems to work when you oversave then for some reason I can move that object behind that bitmap, sometimes there are instances where I am unable to do that unless i completely restart corel draw... is that productive ?? ,
Why is it that this had not been addressed yet, I remember this being an issue I believe since corel 11 or perhaps even farther.
View 10 Replies
View Related
