A client sent me their logo where the name is straight across. They would now like to wrap it around the circle in their logo... They do not know the name of the font, what the font couldn't id it, not much response on their forum...
Is there a way to fit text to path, where the text has already been converted to curves?
I had saved several X6 files to x5 and x4, and found that the text within had converted to curves.
View 3 Replies View RelatedIs there a macro that turns all text on a page in curves?
View 8 Replies View RelatedOn using macro for "Convert to curves all text" the Page Number used with Insert Page Number in Coreldraw x6.4 is not converting it but it remove the page number.
View 1 Replies View RelatedFor more years I can remember, I have been using CorelDraw4 - I use it for designs for t-shirts and various other printing requirements. A lot of this work involves fitting text to path, particularly round the bottom of a circle. I know how to do it in CorelDraw4, how to do it in Corel draw X5 - I can get wording on the top of the circle, but cannot get separate at the bottom of the circle.
View 5 Replies View RelatedHow do I go about creating text that curves in the middle a'la these examples -
View 4 Replies View RelatedI have designed a very large document (a magazine) in Corel Draw 11 with text, drawings and photos. I started converting the text to curves but there's a couple of text columns that disappear when I do so !
View 2 Replies View RelatedI need to take a word, and edit each letter individually. This includes changing shape, color, and slanting and twisting a letter. I want the "i" to be one color, and the dot over the "i" to be another color.
In my old drawing program, I converted the text to curves, then ungrouped the set of letters. I can't seem to be able to do this in Corel. Once converted to curves, when I select the text, the option to ungroup is greyed out.
i am posting this only after doing fruitless research online.
When I select text I can't apply any changes to it until I convert to curves. I have tried selecting using the select tool and text tool - neither makes a difference until I convert to curves the everything is available
View 1 Replies View Relatedhow to get text above and below a path. The path is a circle, and I want to achieve 2 words above the circle and 2 words below. I can get the words below, and to read the correct way round etc, or I can get the words above, but I cant achieve both at the same time
View 5 Replies View RelatedURl....I have never used a text box. Somehow when I copied my list of names from another page, I ended up with rows of them. I really really don't want to retype 132 names. I plan to put them on circles. When I try to do fit to path it says its invalid. I deal with text everyday and always know what I am doing. I know how to put text on a path. I just don't know how to do anything with these text boxes. If i break them apart, it first breaks them into individual names, and next into individual letters.
View 1 Replies View RelatedI am attaching text to a path, but on the bottom of the ellipse, the text is upside down in relation to the text at the top of the ellipse. I am going nuts to try and resolve this. I have CD6 The Official Guide at my side, and no luck.
View 6 Replies View RelatedIs there a way to stretch the width of text, once it is in an envelope or on a path? You can adjust the kerning(spacing), but I don't see anywhere that you can adjust the width of the letters.
An example: I have the word MAVERICKS on an arched path in a design. I want to change that design for the RAMS, so where it says MAVERICKS it will now say RAMS. The problem is RAMS is a much shorter word and I need it to stretch to the same width as the previously used MAVERICKS.
I'm making vectors for my Spreadshirt page, and when I try to upload them SS is telling me that I must convert all the text to curves.How do I convert the text, and what do I do when there is no text in the image?
View 5 Replies View RelatedI had several CorelDraw documents that crashes on me, and the auto-backup did not work.
In all these documents, if I open the text paragraph window and typed on it, the entire program will crash if I exit that window after finishing.
I discovered that if I typed directly on the text paragraph, it will not crash. That means do not open the text paragraph window to do editing. But this makes editing very slow since it seems to be more memory intensive.
Strange the auto-backup directory/folder always do not have my backup files too.
I removed text from a rectangle and that message keep displaying in that rectangle.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
Is there a way of unlinking the text frames so that you can move the text independently from the others?
View 5 Replies View RelatedIs there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
Is there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
Is it possible to lock a text box to prevent it from moving but still be able to input & edit text?I want to make a drawing template in CorelDraw x6 using text boxes for "non Corel friendly" people to use but need the actual text boxes to stay in the same place all the time!?
View 3 Replies View Relatedhow to curve text within a shape, as paragraph text, not artistic text? (See my attached image.)
I have drawn the shape, inserted the text as paragraph text, but the text always wants to sit straight. I am so frustrated as I can find a workaround in either Corel or Adobe CS products. I have tried using artistic text in Corel, but have to do it line by line - and this brings other problems, such as I cant justify each line with each other, and sometimes a character jumps up relative to the other characters and the entire paragraph does not taper in...so this is not a solution, apart from the fact it will take me FOREVER to insert line by line....I would like to treat the text as a multiple line paragraph, and follow the shape.
I am using Corel for driving a fiber laser through a dedicated Net connection not available to the rest of the network and it and my computer are right next to the switch.
My problem is that when I send a job from the PC to the laser it works fine. If I make a small change on the graphics, I save it and send a new job to the laser. Quite often, some part of my grapics is left off the plot even though I didn't touch that graphic or mod it. So I send the job over again and now somewhere else is missing some of the graphic word...usually a word or a letter or number. I usually turn off the computer or get out of Corel and come back in and it is fixed. That doesn't sound like a network dropped or corrupted graphic. I have tried turning off the laser with Corel still up and it doesn't fix the problem when I bring the laser on line again.
In the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
I'm making tickets and i need to add tickets numbers, from 1 to 1000. Print & Merge doesn't fit for me.So I want to change text tag for example: "<text>" to text which will be different (1, 2 ,3 ,4 ,5 ,6 ,7 ...) Wagenaar where the code finds word "Andorra" and change it to "Andorre".
Public Function FindReplace(ByVal str As String, ByVal toFind As String, ByVal toReplace As String) As String Dim i As Integer For i = 1 To Len(str) If Mid(str, i, Len(toFind)) = toFind Then ' does the string match? FindReplace = FindReplace & toReplace ' add the new replacement to the final result i = i + (Len(toFind) - 1) ' move to the character after the toFind Else FindReplace = FindReplace & Mid(str, i, 1) ' add a character End If Next iEnd Function.
[code]...
I am having trouble resizing text boxes with text in them, so that the text scales with the box.If I convert the text box the curves, it messes up the formatting when I add an outline to the curve because the text box itself is given a outline.
View 4 Replies View RelatedIs there a way to automatically condense text in a one line text box, I have linked text boxes vertically and want to paste a list of names into them, and if a name is too long I want it to condense to the text box.
I know how to do this in print merge with the envelope tool but not in a text box.
I'm creating a calendar page - each day is a box. I need the text I put in to be written at the bottom of the box.
View 4 Replies View Relatedhow to Full justify text within a text block so that the shorter sentences (ie the last line of a paragraph) don't Force Justify?
I'm using the correct justify (full), but it is stretching out the last line as if it's a force justify.
I work for a translation company and I've installed a Trial Copy of Corel Draw X5.
I have a 6-page document with several text areas (the Obect Manager sees them as Artistic Areas [I think]).
I'm trying to extract all the text into a text (prefferably an XML), file translate the text using Trados, then import the translated text file back into the Corel Draw Document, with the appropriate text in place of the original text.
I've tried using Extract / Merge text, but this doesn't seem to work.
I have posted before about not being able to open X5 and receiving a "Coreldraw has encountered a problem and needs to close." error message upon launch. I have not been able to resolve this issue.
I have to work on a graphic file and need it converted top X3 (this version opens) as it was created in X5.
text on tyre.jpg
Just wondering what techniques do you vehicle illustration masters use to adjust text to the tyres.