how to get text above and below a path. The path is a circle, and I want to achieve 2 words above the circle and 2 words below. I can get the words below, and to read the correct way round etc, or I can get the words above, but I cant achieve both at the same time
View 5 RepliesURl....I have never used a text box. Somehow when I copied my list of names from another page, I ended up with rows of them. I really really don't want to retype 132 names. I plan to put them on circles. When I try to do fit to path it says its invalid. I deal with text everyday and always know what I am doing. I know how to put text on a path. I just don't know how to do anything with these text boxes. If i break them apart, it first breaks them into individual names, and next into individual letters.
View 1 Replies View RelatedA client sent me their logo where the name is straight across. They would now like to wrap it around the circle in their logo... They do not know the name of the font, what the font couldn't id it, not much response on their forum...
Is there a way to fit text to path, where the text has already been converted to curves?
I am attaching text to a path, but on the bottom of the ellipse, the text is upside down in relation to the text at the top of the ellipse. I am going nuts to try and resolve this. I have CD6 The Official Guide at my side, and no luck.
View 6 Replies View RelatedIs there a way to stretch the width of text, once it is in an envelope or on a path? You can adjust the kerning(spacing), but I don't see anywhere that you can adjust the width of the letters.
An example: I have the word MAVERICKS on an arched path in a design. I want to change that design for the RAMS, so where it says MAVERICKS it will now say RAMS. The problem is RAMS is a much shorter word and I need it to stretch to the same width as the previously used MAVERICKS.
how do you close a path in x6? i select the two duped lines then go to arrange but no close path option. i did it in x4.
View 2 Replies View RelatedLooking to see if corel has any way to scale an open outline along its path from one size to another. So for example a curvy open ended line would start with a stroke of 2 pt and end with a stroke of 20 pt?
View 1 Replies View RelatedI love the function in Photoshop in which you can stroke a selection with a brush. Was wondering if that was possible in CorelDraw X4 as well. I know that we can put text on a path, but is that also working with objects?
Since I like making patterns, I would like to place and distrubute objects along a circle or hexagon shape (and other simple shapes).
is there a way of aligning an object along a path? For example an elipse or an arc.
View 2 Replies View Relatedall of we know about photoshop and many of us using it I am also using it for several months clipping path seems most interesting to me but I a little confusion about clipping path because it can duplicate any image what is your opinion?
View 1 Replies View RelatedI know how to change this in illustrator is it possible in draw?
I want to be able to specify the line weight of a path to be either centred on the path or inside/outside the path. How do I do this?
brushstrokes.png
I've noticed that sometimes when I use an artistic media brush around a closed path, I can't change the brushstroke color without filling the path with that color; see the attached file for an example. I thought that was just unfortunately the way it was.But today I watched Jeff Harrison's video tutorial [URL]...about making a custom brush. He applies it to a closed path, and then, to my surprise, he changes the color and it just changes the color of the brushstroke.
I followed the tutorial, made the brush, applied it to a rounded rectangle, all fine. However, when I changed the color, the center of the rectangle filled with the color as well as changing the brush color, as it always has for me in the past. So what's wrong? Do I have some setting somewhere set to the wrong thing? (I don't have Fill Open Curves checked.)
have number of curved objects which makes a design but goes in straight way. what i want is to follow that grouped objects to a curve .
Power Clip option is not suitable for me as it reposition its original state. is there any other option which can make it in better way.
In X4 there was the option under the Arrange menu to Close Path with several different options like this.
In Corel X5 this option is absent. Is there something equivalent?
After two years of no problems invoking Draw or Photo, I received this message today when I tried to start both Draw and Photo... I downloaded and ran the CorelDRAW Graphics Suite X5 (and CorelDRAW Premium Suite X5) Service Pack 3 but it failed because it couldn't find my X5 suite installed on my computer.
View 4 Replies View RelatedI found Oberon Fit Objects To Path as a very interesting macro and i tried to download it.I have downloaded the zip file from Oberon website , but an Error showed up on my screen saying: "Unable to find CorelDraw x5 installation"...
I know the reason for this is because of the x5 version, which i don't have in my system.But i have also downloaded some other macros that are x4 or x5 versions and they are working excellent on my CorelDraw x6.
Any other macros similar to the "oberon Fit Objects To Path" macro?
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View RelatedX5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
02012013010.jpg
Blank Blocks behind text and graphics
I had several CorelDraw documents that crashes on me, and the auto-backup did not work.
In all these documents, if I open the text paragraph window and typed on it, the entire program will crash if I exit that window after finishing.
I discovered that if I typed directly on the text paragraph, it will not crash. That means do not open the text paragraph window to do editing. But this makes editing very slow since it seems to be more memory intensive.
Strange the auto-backup directory/folder always do not have my backup files too.
I removed text from a rectangle and that message keep displaying in that rectangle.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
Is there a way of unlinking the text frames so that you can move the text independently from the others?
View 5 Replies View RelatedIs there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
Is there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
Is it possible to lock a text box to prevent it from moving but still be able to input & edit text?I want to make a drawing template in CorelDraw x6 using text boxes for "non Corel friendly" people to use but need the actual text boxes to stay in the same place all the time!?
View 3 Replies View Relatedhow to curve text within a shape, as paragraph text, not artistic text? (See my attached image.)
I have drawn the shape, inserted the text as paragraph text, but the text always wants to sit straight. I am so frustrated as I can find a workaround in either Corel or Adobe CS products. I have tried using artistic text in Corel, but have to do it line by line - and this brings other problems, such as I cant justify each line with each other, and sometimes a character jumps up relative to the other characters and the entire paragraph does not taper in...so this is not a solution, apart from the fact it will take me FOREVER to insert line by line....I would like to treat the text as a multiple line paragraph, and follow the shape.
I am using Corel for driving a fiber laser through a dedicated Net connection not available to the rest of the network and it and my computer are right next to the switch.
My problem is that when I send a job from the PC to the laser it works fine. If I make a small change on the graphics, I save it and send a new job to the laser. Quite often, some part of my grapics is left off the plot even though I didn't touch that graphic or mod it. So I send the job over again and now somewhere else is missing some of the graphic word...usually a word or a letter or number. I usually turn off the computer or get out of Corel and come back in and it is fixed. That doesn't sound like a network dropped or corrupted graphic. I have tried turning off the laser with Corel still up and it doesn't fix the problem when I bring the laser on line again.
In the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
I'm making tickets and i need to add tickets numbers, from 1 to 1000. Print & Merge doesn't fit for me.So I want to change text tag for example: "<text>" to text which will be different (1, 2 ,3 ,4 ,5 ,6 ,7 ...) Wagenaar where the code finds word "Andorra" and change it to "Andorre".
Public Function FindReplace(ByVal str As String, ByVal toFind As String, ByVal toReplace As String) As String Dim i As Integer For i = 1 To Len(str) If Mid(str, i, Len(toFind)) = toFind Then ' does the string match? FindReplace = FindReplace & toReplace ' add the new replacement to the final result i = i + (Len(toFind) - 1) ' move to the character after the toFind Else FindReplace = FindReplace & Mid(str, i, 1) ' add a character End If Next iEnd Function.
[code]...