Basically, what I want to do is create a block, such as a piping elbow, that will allow me to click on different angles upon insertion and have it match that angle.
Assuming those gray dots represent the elbow block, which actions do I need to use in the block to have my elbow block match different angles as shown.
When I'm into reference edit mode (REFEDIT) I can make match properties command also on objects which are not in working set - this was not possible to do before and it is pretty annoying. Is this a bug or some new function, hopefully turnable on/off?
Also I never understood, why is not possible to copy anything from reference edit mode, but it is possible to paste into, also there are no problems in Block editor mode? It seems to me like artificial set limit with no obvius explanation why would that be good especially when I see that it is possible to match properties on outside objects.
I need to match few attribute values from one block to different block. I download a lisp file called; ca.lsp which can match the single attribute value. I modified it for more than one attribute value matching. It is ok but still wish to overcome two issues for batch prcess
1. picking up the blocks by selection
2. click the alternative block numbers of times to match the numbers of attribute values I needed.
How to modify this lisp I can run it by block name selections instead of picking selection which enable me to run batch process for numbers of drawing? That will be good...
Lisp & Demo file attached (Match attribute value, A, B & C to Attribute 1, 2 & 3).
Is it possible to create 3D dynamic block and export dimension data ? in detail I would like to create a pipe block, use it in a dwg with different length and export data in order to know sum of all blocks with different length.
As alternative, In case 3d dynamic block is not feasible, is it possible to export data to calculate dimension of 3D object?
I want to create a dynamic block that as I select my pick point to move it over it stretches the box, however at the same time it arays 2 other lines at the same time. The trick is I need the 2 lines that array to renceter them self within the overall box thats being strtched. To put this in exact teerms I'm looking to create a dynamic block of a reinforced concrete slab that you can stretch to the length you want and at teh same time the reinforcing sysmbeol (----- X-----) will array itself and recenter. Is this possible to do?
View 9 Replies View RelatedI'm having some difficulty in deciding how to go about creating a title block for my drawings. I have attempted to create the title block with Document fields from the drawing properties custom properties tab, and creating the same fields with information from the Sheet / Sheet Set fields. Both title blocks used attributes inside the block to house the fields, and both were .dwt files.
Is there a way to take the properties from the .dwt drawing into a newly created drawing, or is there a way to link custom sheet set properties with a newly created sheet set? The main goal is to not have the user manually input multiple custom fields either in the drawing properties or the sheet set manager of the new drawing.
Is there a way to create an attribute or MTEXT in a block where part of it is User defined and the other part is constant?
e.g.
"AUTOCAD = 12345 LAYERS"
Where "AUTOCAD =" and "LAYERS" are constant
and
"12345" is the user defined part.
The reason why I would like this is because i want to be able to Middle Center Justify the text and if i were to create 3 separate texts then it wouldn't be good (2 texts and 1 attdef)
I am trying to create a leader that reads the block "name" and then places it into circle, or square at the end of a leader.
I see it in the "other" programs but I have plain ole Autocad.
Should be simple enough except my brain is locked in the clouds and im spinning around in circles.
Which may not be a bad thing, except NASCAR hasnt started yet.
I am trying to create a block and include attributes that have the background masked. I know how to mask the background in mtext but am curious if it is possible to do on attributes.
View 2 Replies View RelatedI have searched high and low and still could not find a tutorial to really explain how to create a drawing title with attributes (Detail Number, Sheet Number, Detail Title, Detail Scale). All I find are on creating dynamic block, which I could achieve, but I need one for a block that has (or will have) attributes.
I was able to find a tutorial on attributed door numbers, but it does not work for drawing titles that has attributes. GOAL: I would like to have all my seven drawing titles in one file and to be able to stretch the leg of any selected title to a desired length.
using AutoCAD 2009 (vanilla)
I got too smart for myself today in bringing an old drawing up to current standards...Everyone seems to want their block attributes to be zero - I have blocks where the attributes are best when they match the rotations of each blocks.
I have an old drawing that was rotated (as it should be) at approx 2deg.
I used a lisp routine to global edit all the blocks that needed to be at zero. BUT for some reason (and after hundreds of blocks were corrected), I noticed I now have two blocks that should NOT have been in the set have had their attributes rotated to zero....and the attributes should be at the same rotation as their block's rotation.
Because those two blocks have a fixed tic mark, I can click on the mark to see what the block rotation is, then rotate its attribute to that rotation, but I have hundreds of blocks! One-at-a-time sucks....
Any chance there is a GLOBAL way to edit an attribute rotation to match its own block's rotation?
I am tying to create a Dynamic Block of a steel angle of multiple sizes and thickness. I used Dynamic Blocks before and live the idea of changing sizes on the fly with out having to delete and recreate an object.. I got as far as creating an angle of different sizes, i.e.. 4x4, 5x5, etc. and different thickness but can't get the thickness to work with the radius of the angle.
View 2 Replies View RelatedIn AutoCAD it is possible to set the orientating of a block to the orientating of the layout.
This can be done to run the " block" command, select the block to change, and and activate " Annotative" and " Match block orientating to layout"
For example, you may want to have a block presenting the locating of an elevator automatically orientated to every layout.
In a layout with a rotated viewport by 90 degrees, all the elevator blocks are shown according the layout. Is it possible to set the block orientating to match the layout in .NET ?
Is it possible to set the block orientating to match the layout even the block is not annotative?
How to get attribute values to match in the same block? In my titleblock have the clients name displayed a couple of time in the block. I want to be able to change the clients name in one spot and have it change in the other. I have tried to use fields but the field will only display the default value of the attribute.
View 2 Replies View RelatedIs there an easy way to ensure that the position of attributes on a block match the position on another block?
I just used the ATTIN command to upload a bunch of data to the block attributes on a drawing, and now the information is all over the place.
Instead of going through each one manually and repositioning the attributes (a VERY lengthy process), I want to use a "correct" version as a template of sorts to inform the other selected blocks of where to place the attributes and have it reposition the whole thing automatically.
Is this even possible?
I'm inserting blocks with lisp using the following code.
(defun C:test()(setq MYPOINT (getpoint "
Select an insertion point"));(command "_-xref" "attach" "C:/ICT/GEBERIT/XREFS/650-270-00-1.dwg" "_Scale" "1" MYPOINT)(command "insert" "C:/ICT/GEBERIT/XREFS/650-270-00-1.dwg" MYPOINT "" ""))
The lisp however only allows me to rotate in the x-y plane but I also want to rotate it in the z-axis hoe can I do this?
I also tryed to combine a 3d rotate to the code, as follows but to no success...
(defun C:test() (setq MYPOINT (getpoint "
Select an insertion point"));(command "_-xref" "attach" "C:/ICT/GEBERIT/XREFS/650-270-00-1.dwg" "_Scale" "1" MYPOINT)(command "insert" "C:/ICT/GEBERIT/XREFS/650-270-00-1.dwg" MYPOINT "" "");Rotates the item in the z axis...(setq MYANGLE (getstring "
Specify rotation angle for the Z-axis "))(command "_Rotate3D "_x" "LAST" "" "last" MYANGLE ))
Trying to make a rotateable block with non-rotating text (i.e. full-time "match orientation to view" text).
C3D2010
Win 7
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
I have located steel beams of an existing building roof frame. I am being asked to provide a distance from the theoretical roof to these points. The roof is sloped and I can create the sloped roof plane but I am unsure how to get the distance from the point to perpendicular to the theoretical roof slope, not the difference in elevation. Also would it be possible to label or make a table?
I am using Autocad 2013.
create a plane and mirror a solid?
I am planning to have the following workflow:
Plane creation:
Through the z-axis and at an angle of 7,5° to the XZ-Plane
Naming the plane - Mirror Plane
Turning off the plane visibility
Mirror solid:
Add mirrored solid to the existing solid
Here is a sample ao the code...
Dim oDoc As PartDocument
oDoc = ThisApplication.ActiveDocument
Dim oCol As ObjectCollection
oCol = ThisApplication.TransientObjects.CreateObjectCollection
'This does not work...
oCol.Add(oDoc.ComponentDefinition.SurfaceBodies(1))
'Here I want to create a new plane
Dim oPlane As WorkPlane
oPlane = oDoc.ComponentDefinition.WorkPlanes(1)
Dim oMirror As MirrorFeature
oMirror = oDoc.ComponentDefinition.Features.MirrorFeatures.Add(oCol, oPlane, False, kOptimizedCompute)
I have also attached a simplified part file where the code has been copied inti the iLogic browser
I have 2 different diameter cylinders and I would like to create a plane that is tangent to both.
View 7 Replies View RelatedI am trying to create two plane's one after the other like it is done in this video tutorial.
[URL]........
My problem begins with me only having 1 point on the part to pick for my 3 point plane command. In the video there is no bit where you are supposed to create a point but I'm thinking I wont be able to duplicate without doing something like that.
I am trying to scale a 3D object in the XY plane only, however the gizmo only lets me scale uniformly on all planes. I am trying to shrink the diameter of the cylinder without changing its height. The Set Constraint option (via RMC on the gizmo) only allows for XYZ, all other planes and axes are grayed out and not available.
how to scale a single face of a 3D object, such as the top of this cylinder? Say, if I wanted to scale the top to make it more conical, for example.
How to create a work plane that is perpendicular to a surface? I'm trying to do this so that I can "split" the object into two separate entities where the plane is.
View 9 Replies View RelatedOn one part, I have a bore hole drilled on a curved surface so the hole is actually an ellipse.
Now the other part I am trying to constrain together is the pipe that will be welded into the bore hole; so that is a simple circular pipe.
The issue is that the pipe has to be inserted 0.25" above the interior of the bore hole to allow for room for the weld. In order to do this I have tried to create a plane attached to the 3D ellipse and then constrain the pipe to be 0.25" above that plane. The problem is I cannot seem to create a plane attached to the 3D geometry; I cant even find a way to attach points, or pick the center point of the bore hole.
How to create a plane on 3D geometry and link it to said geometry. I'm using 2012, if that is necessary information.
I am using LT 2013. I cannot figure out how to match properties for text. I click on the 2 options and the box witdth, orientation, layer will match but not the style or font. I have tried using Quick Properties to select but have not had any success with this tool. Here is what I did:
Created a style and named it Arial.
Open the Quickselect box.
Apply to : click the box and select the various mtext objects.
Object Type: mText
Properties: Style
Operator: Select All
Include in New Selection Set is checked.
I click Ok and the objects are selected.
Next I go to the Properties Manager and change the style to the one I want to use, bu the text does not change. If Idoubleclick a text object it shows the correct style, but not the correct font. What have I missed doing?
I have just updated to 2013 LT. I want to customize my toolbars to match my old set up but once I've spent ages moving tools to new folders and arranging them how I like it, I close Autocad then open it again and it reverts back to default so all that time editing folders etc is wasted!!
View 2 Replies View RelatedWhen doing a match properties from one hatch to another, I end up with two hatches having identical properties (pattern, scale, etc) but that look completely different. See the attached image.
I tried the old snapbase trick and also tried various hatch origin settings, but without success.
I am trying to use AutoCAD to render some small parts. I am used to using Inventor Studio, but AutoCad's rendering tools have taken some getting used. to. I have everything figured out, with the exception of the ground plane for shadows and/or reflections.
I originally wanted a ground plane for a shadow to be projected on. However, I had no luck with that, so I modeled a large box under the part. Using that, I am able to get a shadow, or reflection, BUT, the edges of the box are showing in the background. The easy fix is to make the box larger, however, I need the reflective surface and background to be white so that it can be printed on paper without seeing the rendered edges.
How can I set a ground plane, or model a plane, for shadows or reflections, AND made it true white so that the edges cannot be seen?
I'm using Inventor 2009.
Imagine a flat, rectangular plate with origin plains located symmetrically down the middle of the plate. Place a component, say a small cube, and constrain it to the face of the plate and the origin planes so that it too is symmetrically located. I now wish to pattern this cube about the midplane and create a total of five instances. I select "Pattern Component" in assembly mode and select the cube. For direction 1, I put in two instances and select an edge of the plate so that the pattern is taken to the left of the midplane. For direction 2, I again select two instances but pick an edge so that the pattern is taken to the right of the midplane. I now should have a total of 5 cubes but I don't. I have 6.
The second pattern is actually a repeating pattern of the first which, in the end, creates too many cubes. Visually, it looks correct because the cubes are placed excatly on top of each other. Numercially, like in BOMS, it is not correct.
Is there a way to avoid these duplications?
Why is it that whenever i use a command for pan and match properties, the hatch from the other areas do not display but when i exit the command the hatch is there. the problem is you cannot match the properties of from one hatch to another.
This happens in all drawings!
Is there a way to create a block with attributtes that automatically complete x, y, z, lat, long for the insertion point of the block?
I am trying to complete text in paperspace that will automatically fill in the lat long of a point in model space without using a table. I have tried field insertion with reference to a cogo point, but it doesn't give options for position on a cogo point. If I pick a block with attributes, it will let me pick any attributes, and x,y position for the block.
Cogo points show all the information I need to propagate in the properties....but how do I get that to translate into the text using fields or some other method?
Dell Precision T3600 - Windows 7 64-bit
NVIDIA Quadro 600
Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz
8 GB ram - Two 1TB raid