AutoCAD Visual LISP / AutoLISP :: Routine For Multiple Paper Space Layout Tabs
Nov 25, 2013
Any LISP routine that can create multiple paper space layout tabs and can name them incrementally. I have a template and I wanted to copy tab2 of my layout multiple times and name them incrementally. I have a code shown below that comes close to what I need it to do but it creates a "New Layout" instead of copying the tab I need it to. Please see code below:
(vl-load-com)(defun c:LAYOUT+ (/ *error* prefix i n acDoc oLayouts layoutName) (defun *error* (msg) (if acDoc (vla-endundomark acDoc) ) (cond ((not msg)) ; Normal exit ((member msg '("Function cancelled" "quit / exit abort"))) ; <esc> or (quit) ((princ (strcat "
** Error: " msg " ** "))) ; Fatal error, display it ) (princ) ) (if (and (setq prefix (getstring "
Enter layout name prefix: "))
[Code] ......
View 7 Replies
ADVERTISEMENT
Apr 12, 2012
Is there a way to change a specific attribute in a block found over x-amount of papers pace tabs?
At current I can only change one tab at a time.
View 7 Replies
View Related
Aug 21, 2006
Routine to build a legend in paper space
I am looking for a routine or app to pull existing MS legend symbols (inserted from the block library) from the drawing and automatically place them in a PS legend. Since I don't have a large screen and sometimes miss a symbol before running a test plot, I wish to automate the process.
I am looking for a way to populate a paper space legend with blocks inserted into the drawing for Land Desktop 2005, 2006 drawings.
I also have to replace non-conforming architectural blocks with my own, then build the legend from all drawings tabbed in the drawing file (possibly all xref drawings as well).
I liked your article on 'Selectively writing drawing blocks to any folder using VBA'. I need to brush up on my VBA 6.0 and learn VB.NET. Perhaps your code can be modified to do the task, and this would be useful to many other designers in a further article.
View 9 Replies
View Related
Nov 5, 2013
I've tried doing a block that automatically updates the X and Y coordinates from its moveable leader. I can get it to work in model space or paper space. But my problem is I want it to work in PS, but update with the MS coordinates through the viewport.
I can get it to update, by LISP, by picking a point and passing the points to the blocks attributes. At the moment I have a LISP when actioned it locks the viewports, activates the viewport, and asks you to select a point. Once selected it de-activates the viewport (going back into layout tab) then asks which block you want to update. Where you now select the block and it updates the coordinates. I.e. manually pick the point in MS, switch to PS and then manually pick the block. Then I have to manually modify the leader to the correct location.
I'm hoping that I can (In PS) move the end of the leader to snap to a position in MS and the coord updates to reflect the correct MS coordinates. I'm thinking that maybe this can't be done automatically and that I maybe can move the leader but I'm not sure how I can do it without running a LISP to update the block?
I'd be happy moving the leader then just running a single command and the leader coordinates updating without having to select the points and the block again.
I've attached the block showing the auto update of the attributes (fields).
View 9 Replies
View Related
Nov 25, 2013
LISP routine that can create multiple paper space layout tabs and can name them incrementally.
View 4 Replies
View Related
Jul 22, 2004
Any lisp file that can plot all of the layout tabs? I am looking for one that will plot to a plt file and also pdf?
View 5 Replies
View Related
Mar 6, 2013
okay, I need a way to get a list of layout tabs without vl-, vla-, vlax, or LAYOUTLIST functions. Why? You ask?
This is for lisp funct that will run in AcCoreConsose. Apparently the console doesn't yet support these.
Also, need a way to check Effective name of dynamic blocks without vl-, vla- or vlax- funs also.
View 1 Replies
View Related
Mar 6, 2013
(layoutlist) ... returns a list of strings of the layout tabs in the drawing.I've used this ages... Isn't it a core lisp function, or is it coming from express tools or somewhere else?
View 5 Replies
View Related
Aug 9, 2013
Is there a way to have a Lisp Routine open multiple script files?
I have 10 types of scripts, that are specific to the type of file they open (as shown below). which simply open a file, purge/audit, save and close.
open "Q:PROJECTS321700Field ManagementCoordinationElectricalSleeving613321700_ES-613-Lev01.dwg"audit y-purge all * n-purge R * naudit yqsavecloseopen "Q:PROJECTS321700Field ManagementCoordinationElectricalSleeving613321700_ES-613-Lev02.dwg"audit y-purge all * n-purge R * naudit yqsaveclose The file above was named ES-613.
I would like to create a Lisp Routine that opens this script, *Some how closes the file*, and then opens another script.
For example:(defun c:Audit-Purge ()(command ".SCRIPT" "O:/Users/Kurt N/Script/Novartis/NovartisPURGE/ES-615.scr")(PROMPT "ES-615 Done.")(princ)(command ".SCRIPT" "O:/Users/Kurt N/Script/Novartis/NovartisPURGE/ES-613.scr")(PROMPT "ES-613 Done.")(princ)ECT>>....)
View 4 Replies
View Related
Dec 27, 2013
I have a CAD file with a couple hundred detail blocks in it, and I am trying to standardize them without haing to block edit each detail block.
What i am trying to do in each block is as follows:
- Explode all dimensions, leaders, and blocks
- Change all objects to layer "0"
- Change all lineweights to default
- Change all object on colors 7 and bylayer to byblock
- Change all text and mtext to arial font
- Delete all points
Civil 3D x64 2012
Win 7 x64 Ultimate
I7 3820 (3.6ghz quad core with HT)
32gig RAM (Corsair XMS3 4x8g)
Intel x z79 mobo (BOXDX79TO 2011 socket)
Radeon HD 7850 2gb GDDR5
View 3 Replies
View Related
Dec 20, 2011
I'm trying to display the papersize of a layout in a block. So far I've looked into diesel and field expressions.
With field expressions I can get the name of the papersize to display that's too long(OVERSIZE: ISO A1), I need only the last two letters.
View 5 Replies
View Related
Dec 9, 2013
I need to count the blocks in paper space automatically. Is there any method or lisp for this.
View 7 Replies
View Related
Jan 24, 2013
Is there a way by which I can link a paper space block attribute to model space block attribute
In other words
Paper space as a block Title and attribute "QTY"
Model space has a block X and attribute "QTY_MODEL"
Is it possible to edit "QTY" and as a result get automatic update on "QTY_MODEL"
I am not familiar with diesel/macros yet in Acad.
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
View 4 Replies
View Related
Feb 14, 2013
Is there a quick way to simultaneously delete all objects in a layer if these objects are found across several layout tabs and model space?
At the moment, I'm getting the objects using: (setq a (ssget "X" '((8 . "Revision"))))
This finds all objects in the drawing, but if I just use: (command "_.erase" a "")
to delete them, only the the objects in the current layout or space are getting deleted...
View 2 Replies
View Related
May 3, 2013
I'm trying to limit the activity inside a paper space's view port. Specifically text and dimension objects (our routines) as these layers inside the view port may be frozen.
How do I pragmatically get out of the view port back into paper space?
Command: _.PSPACECommand: cvportEnter new value for CVPORT <1>:Command: _.MSPACECommand: cvportEnter new value for CVPORT <2>: 1Cannot set CVPORT to that value.*Invalid*
View 3 Replies
View Related
Mar 7, 2013
I want to insert another drawing layout tabs contents in current drawing.
It's easy for MODEL tab, but for LAYOUT tabs, I dont know how!?
I prepared a code for INSERTING MODEL tab in current drawing:
(defun INS_DWG (TAB path dwg P / blk)(setq blk (strcat ""*" path dwg """));(setq N (vla-get-count (vla-get-layouts)));;Number of LAYOUT TABS in dwg(if (or(= TAB 0) (= TAB nil))(command "INSERT" blk P 1 0)); TAB=0 or omitted ==>Insert MODEL;(if (= TAB 1));==>Insert the 1st LAYOUT in dwg file;(if (= TAB 2));==>Insert the 2nd LAYOUT in dwg file;and so on....);;;usage:;;(INS_DWG 0 "c:\test\" "test.dwg" '(0 0))
View 8 Replies
View Related
Oct 11, 2012
I'm trying to write a lisp routine that, when I invoke the mleader command, osmode is set to "nearest" & orthomode is set off. I then would like the original settings to be returned.
attached is what I have written so far:-
View 4 Replies
View Related
Nov 21, 2013
Basically, the routine asks for the user to choose the hatch type (Retirer/Percer), then the layer (Defpoints/Select/Current) and finaly the type of the object to draw (Polyline/Rectangle). My original routine has also a Circle and a Boundary options, and an Error trap to reset the variables but I will keep it simple for the purpose of my issue.
So, my issue is: when I choose the type of object to draw, it draws just one of it and the routine ends. I would like to have something that "says" to the routine that I want to keep drawing that object (Polyline or Rectangle) and putting the hacth inside until I do enter and then the routine goes to its end.
View 9 Replies
View Related
Dec 10, 2012
I have created an acad.lsp file in where I want to arrange all our company settings. I've stored it on the network to make sure everyone will use the same one and when updates take place I don't have to run past all pc's to change it. I've set everything in the deployment package but users can still change it when they reset their profile. Plus some pc's are already installed with AutoCAD before creating the lisp routine, how can I enforce the support directory to check on the network for the acad.lsp each time?
View 9 Replies
View Related
Oct 16, 2013
with the mouse I can select objects on the screen and then start a command that uses these objects.
How can I perform this in lisp?
I can create my selection set, that's no problem, but how can I 'make it active' for an external function?
(ssget "_C" p0 p1 '((0 . "TEXT")))
???
(c:txtexp)
View 2 Replies
View Related
Aug 12, 2012
I want autolisp program to check overlap like in closed or open polyline with any other entity in the drawing, whether other entity is overlapping inside the polyline or not, i am beginner in autolisp and want to know exactly which functions are used or the program itself Also if possible to check circular overlap of one polyline with itself.
View 1 Replies
View Related
Jul 23, 2013
LISP routine for rotating lines so that text in linetypes always reads from left to right?
I use the QUERY command to create basemaps and often the lines that are imported read upside down or backwards or however you prefer to look at it. Most often, if I look at the XY coords of these backwards lines, the End X coordinate is of a higher value than the Start X coordinate.
Looking for something that would compare the two X coordinates of a line, do some sort of an IF Start X > End X, and if its true, store the XYZ coords of the Start and End in some variable, and swap them.
View 2 Replies
View Related
Oct 5, 2011
I am looking for a routine that will replace all blocks named "DgnMisc_nodepoleind" with a block named "DgnMisc_nodepoleind2" keeping the insertion point. I could use (command "-insert" "DgnMisc_nodepoleind=Y:/ACAD2007/DA settings/Library_new_scale1/DgnMisc_nodepoleind2.dwg" NIL ) but my problem is that the block I want to replace is used on two different layers and I only want to replace the ones on layer "TPSYM01".
View 3 Replies
View Related
Jan 9, 2013
I found a lisp routine on the internet to change page setups on multiple layouts. The lisp worked but on some of the layouts it moved the viewport off the paper background (see attached). The layouts print fine but the only way to get the viewport back on to the background is to open the page setup and click modify, then ok and close. I tested this on a .dwg that I had saved to my computer rather than on one in the main folder but I would like to do this to to all are maps since our IT decided to rename our printer and now all pages setups are no good.All I know about lisp is how to run one.
;; Copy current layout page setup to all layout tabs
(vl-load-com)
(defun c:CPS (/ Adoc Layts clyt)
(setq aDoc (vla-get-activedocument (vlax-get-acad-object))
Layts (vla-get-layouts aDoc)
clyt (vla-get-activelayout aDoc)
)
(foreach
itm
(vl-remove (vla-get-name clyt) (layoutlist))
(vla-copyfrom (vla-item Layts itm) clyt)
)
(princ)
)
View 1 Replies
View Related
Sep 4, 2012
I have a lisp routine:
(defun getLayout (pos / result cLayout layouts^ i len)
; pos = -1 return previuous layout name
; pos = 0 return current layout name
; pos = 1 return next layout name
(cond
((zerop pos)
(setq result (getvar "ctab"))
); case
[code]...
which basically returns either the current, previous or next tab name depending on what you call up. Any way to link this lisp to a field? I am doing some plan and profile drawings which contain match lines I would like to have the match line text automated. For example if I'm on layout called PP02 there would be two match lines in the drawing one would read MATCH LINE PP01 and the other would read MATCH LINE PP03 this lisp routine returns the correct variable but how do I loink this to a fiels?
View 1 Replies
View Related
Jun 17, 2013
I cannot get my lisp routine to run when I batch plot in AutoCAD 2014. It's loaded into the startup suite and runs when I open the individual drawings but not during a batch plot. How can I get this to run during a batch plot?
View 9 Replies
View Related
Oct 16, 2012
I don't do a lot of programming and when I do it is mostly with older lisp commands. I have routine that works in 2010 but we are switching to 2013 and it doesn't work. The routine assigns the area of a polyline to a field. The portion of the routine that isn't working is where it assigns the object id for the polyline. Here is that portion of the routine:
;; select an object
(if (setq ent (entsel))
(progn
(setq ent (car ent))
;; Check to see if object selected is a polyline
(if (= (cdr (assoc 0 (entget ent))) "LWPOLYLINE")
(progn
;; obtain the object id from the selected entity
(setq objID (vla-get-objectid (vlax-ename->vla-object ent)))
View 1 Replies
View Related
Oct 25, 2011
I have created a lisp routine that I would like to share with other CAD users, but it doesn't work on the server, and it works fine on my machine. Does "findfile" function work on a server environment?
View 4 Replies
View Related
Sep 23, 2013
I am looking for a LISP to automatically rename all my layouts. I would like the first layout to say "HWY 400 (01)", second layout "HWY 400 (02)", third layout "HWY 400 (03)" ect..
View 4 Replies
View Related
Jul 21, 2006
I need a routine that one can select a fence or a path along a whole lot of contours which are not in 3DPoly but rather a heavyweight POLYLINE and then have the Z value (elevation of this polyline) printed over the contour preferably along the direction of the vertex picked.
I have something right now that works by selecting individual plines but I need one you can select a whole lot and have the text inserted at the correct position.
See my simple code below:
;THIS IS FOR LABELLING 3D CONTOURS
(defun C:3DC ()
(graphscr)
(setq p (entsel "
Select CONTOUR to label: "))
(setq e (entget (car p)))
(setq e1 (entget (entnext (cdr (assoc -1 e)))))
[code]....
View 2 Replies
View Related
Oct 16, 2013
I recently upgrading to ACA 2014. I have set my trusted locations, my file path, the startup suite, and the system variable to load acad.lisp on startup. Most of my lisp routines load, but not all. I still have my ACA 2011 loaded, all settings are applied as required, yet I do not have the same issue with the same lisp routines. I have to reload my lisp routines for every drawing.
View 7 Replies
View Related
