I would like to make some sort of an "online" catalog where the engineers could review details, and just tell the draftsmen the details they would like to include in their design set. I'd be very interested in any system that you might use. We, at one time, used printed booklets for the engineers, but got to be a hassle when details changed. Is there a good software system that might make this an easy task?
View 4 RepliesIs there a way to change he default layer a detail comes in on. For example I go to detail manager and insert a section view of a W10X112 it is inserted on layers "A-Detl-Wide" and "A-Detl-Patt" I would like it ti insert on Layers S-Detl-wide and S-Detl Patt"
View 5 Replies View RelatedHow you can have multiple details on one sheet but there are several different scales. Some are 3'-0"=1'-0", some are 1 1/2"=1'-0'. Then when you set up the sheet you just make different view ports. But i don't understand how you can draw them all in model space in difference scales.
View 2 Replies View RelatedLR 5.3 ask every time which catalog should be used. I select standard and all work fine. I select the catalog also at LR 5.3 Settings but if I quit LR and start again, LR ask the catalog question again.
View 3 Replies View RelatedIn the Adobe_variables_table in my LR5 catalog, the AgPreviewBuilder_standard size is 1440, as set in my prefs. But further down in the table, the SynchroniseFolder_StandardPreviewSize is 1680 (the default value?).
View 1 Replies View RelatedDetails and sections signs in model/viewport modes,
In steel structure drawings, it is very common to have cross sections at particular locations as well as having details at specific joint.
I’m wondering if there is a way to have automation for
Having a sign (circular or rectangular) on the original drawing to show what each viewport represents on the model space (attached). This feature is already available (for example) in the ArcGIS software, i.e, each viewports is indicated by a sign on the original map to show where we are in that viewport
Having a cross section sign that represents at which location the cross section is taken (attached)
I’m not talking here about 3D model. All what I want is to show what each viewport represent on the mother drawing and also to show where the cross section is taken.
Attached screenshots
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
With reference to the standard hydraulic symbols which are contained within the library in Autocad 2013,
To which standard they conform i.e. : ISO 1219-1 ?
My company have created a standard cui that we all must use and cannot be changed in any way.
Whilst I agree this is a good idea, there are a lot of command icons missing from the ribbon which I use frequently.Is there any easy way I can add these to my cad setup ?
There are different results when executing polar array using the 'classic' method and the array using ACAD's standard array. I tend to revert back to the classic array as I find this more user friendly and tend to use this one over the standard ACAD array. Which methods are preferred by other CAD users ? I was wondering if any other CAD users prefer any other 'classic' functions over the standard ones. I sometimes use 'classiclayer' as well because of a display issue, not sure if this is a common bug that other users have found too ?
View 8 Replies View RelatedWhen I first time use AutoCAD 2013, my Properties toolbar can be displayed by right-clicking at the pull-down menu at click on the properties. But now I could not find the properties option anymore after right-clicking at the pull-down menu. get back my properties toolbar displayed in my AutoCAD 2013.
View 6 Replies View Relatedwhen i start with the dynamic simulation i found out that there isnt any option of revolute or prismatic or anyother standard joints.. just hv spacial joints under that session... have did almost all the updates and no use.. still remains the same...
View 1 Replies View Relatedim trying to do is print on standard 8.5" X 11" paper but for some reason it keeps cutting off the top and the bottom. ive tried changing the plotter settings around but to no avail. its like theres a certain amount that it refuses to pring on the bottom. no matter what, the is always a .5" gap at the bottom. i can get it to print to the very edge of the top. just having issues with the bottom. ive also tried using plot calibration and all of that is fine
See photo for what im getting. and yes its doing it when i make pdf's too.
I have been searching for a variation of the AR-B816 standard hatch pattern for a while with no luck. I would like the same 1:2 ratio only in a stacked bond, not running.
View 4 Replies View RelatedI added a .PAT file to the 'support file search path' in order to use a custom hatch pattern. (Im using AutoCAD LT 2012)
In the process it has deleted all of the predifined hatch patterns and the custom one did not work either. So now I have ZERO hatch patterns.
How do I get the predefined hatches back?
How do I get the large Hatchwindow /Dialogbox as standard? I mean, without rightclick - settings.
View 2 Replies View RelatedCan I create a template with layers/linetypes that I would most often use
View 2 Replies View RelatedSo there seems to be a problem with the multi body part functions in 2013.
Once you create a multi body, or a multi body feature, and then try to go back and edit it you can no longer select difference bodies.
A little more digging and it almost seems like the problem is that you can not use "ctrl" to multi select bodies.
Inventor Pro 2014 SP1
Vault Pro 2014
Windows 7 x64
2.53 Xeon
Quadro FX 3800
24GB RAM
We have just recently install Building Design Suite Standard 2014 and the tool palettes DO NOT work.
Clicking on the standard palettes that load with ACAD will not even work. We have also tried to make new ones and the will not MAKE (for lack of words).
Here is the Autocad warning it gives us:
Unable to execute the tool. Possible causes are:
-The tool is not registered properly. Please check your installation.
-the tool is from another application and is incompatible with the current application.
We are running a new copy and it IS registered.
Why would I want to select a Profile like Camera Standard instead of Adobe Standard?
View 10 Replies View RelatedI was working on some isometric drawings for my CAD class and I can't seem to figure out how to get the grid back to the standard 2D grid view that I used to get when opening CAD. I now jusr get this dotted grid every time:
[URL]...
We previously switched from 2010 to 2012, i transferred our pipe catalog with custom pipes. I though i did it right, but when i started editing pipes that were started in 2010 the pipe sizes were automatically changing to the wrong size after edit.
We are about to upgrade from c3d 2012 to 2013, i don't want this to happen again. proper way to transfer our customized pipe catalog?
C3D 2012, SP1
Win7 - 64bit
I have install Civil 3D 2013.
In my 2012 release I added several parts into the pipe catalog. I would like to merge those 2012 parts into my new 2013 pipe catalog.
I want to convert a cone (standard) to a sphere (standard), how do i do it?
View 5 Replies View RelatedI'm having some problems with drawing paths in Illustrator. Everytime I draw a new path, this new path shows up in the standard settings. The 'brush defenition' turns back to 'basic' and the 'variable width profile' back to 'uniform'. It would save me a lot of time if I could change those standard settings into what I prefer.
View 5 Replies View Relatedgiven I do a foreshortened view. Is there a way to fit the shortenings parameters to a view in a different window with a different reference file?
If not it would be a little awkward to achieve exactly the same result with a different file. As replacing references does´nt work with single view representation I´m stuck with manual- non constrained alignment of view details... which can´t be right I guess.
if there was a way to do it "right" without the need to switch to AutoCAD.
- 2500K @ 4.2Ghz- 8GB - Radeon7970 -
- Xeon 1230V2 @ stock Ghz- 32GB - Quadro 2000 -
- Factory Design Suite Premium Subscription-
I am working on a lab with cabinets. I changed the door to a single window (left/top image) from a solid door (right/bottom image) and now my renderings (left/top image) look like crap. Have I just pushed my card too far..
Using AutoCAD 2012 MEP, render set at Presentation 1024x768, walls are xref'd in.
PS - I did not spec the pc or cad package, just working with what my employer set me up with. Full pc stats are in my profile.
I have some doubts about Level of Details. How to constraint the assembly in Level of detail mode. I need suppress the features in position mode not in Level of Detail mode.
View 3 Replies View RelatedCan export the repair details from dwg drawing prepared by asd in to excel by the use of auto cad?
View 3 Replies View RelatedWe work on A3 size sheets and becourse we have a lack of plotters we can not exceed this size. What the next entails ... The details that we need to make understandable are something too small because there is just no space on the paper for us to make this really clear by eg using the scale 1:1.
Our question is:
-Can I place a created detail from Sheet 01 on to another sheet?
-Can I have a reference in the partkist to this Sheet 03?
For retrieving information about attach DWG file there is a API call "db.GetHostDwgXrefGraph(true)"
Similarly is there any API call for Attach Image files
i have many drawings in dwg but wish to upload onto my website...how can I convert a dwg file and retain its detail so it can be the same on my web page....have converted dwg to jpeg tiff gifff etc but it loses detail
View 9 Replies View Related