How you can have multiple details on one sheet but there are several different scales. Some are 3'-0"=1'-0", some are 1 1/2"=1'-0'. Then when you set up the sheet you just make different view ports. But i don't understand how you can draw them all in model space in difference scales.
View 2 Replies
when i copy paste this drawing from autocad architecture 2013 to another drawing it goes into that drawing in multiple scales
before after
I have checked all ins settings, I have tried to block it and unblock it, all items are there, some are just super small, some are normal.
We work on A3 size sheets and becourse we have a lack of plotters we can not exceed this size. What the next entails ... The details that we need to make understandable are something too small because there is just no space on the paper for us to make this really clear by eg using the scale 1:1.
Our question is:
-Can I place a created detail from Sheet 01 on to another sheet?
-Can I have a reference in the partkist to this Sheet 03?
Can I have 2 drawings on the same sheet to different scales.
I am trying to make a template for a simply drawing of a property at say 1:100 with a location plan of the area at say 1:1250.
We deal with multiple architects at our company, all of whom have different standards for their Linetype Scales (on a drawing at a scale of 1/8"=1'-0" some use 36, others 24 etc).
We need to take their Architectural drawings, remove all of there dimension notes etc and create an empty floor plan we put our designs on.
The issue is that we cannot have all of our symbols work with one consistent linetype. We have to go into the block and manually overide the LTS of the individual item to suite the LTS of the architects drawing.
Is there a way we can insert the architect background as an x-ref and have the LTS of our drawing not effect it? Or possibly a LISP/Script that divides the individual LTS of all their entities by their global LTS so everything looks fine in our drawings.
We have had issues with annotative objects in the past with some of the architects drawings so that is not a viable option.
After many years, my office has finally come to the realization that we need some standards when it comes to AutoCAD. One of the standards I'm trying to figure out is regarding the pen type settings and various scales.
How to go about setting up one ctb file that would cover printing drawings at various scales, but the line weights will remain proportional to the appropriate scale? Our current method of printing is setting up a 24"x36" sheet in paperspace and printing at 1:1. Sometimes we have to do our drawings at 1/8" and others we can do at 1/4", but regardless of the scale, the drawing is done with the same lines/layers. The current method of plotting is by using 2 different ctb files, one for the 1/4" scale and the other for the 1/8" scale. This seems a little ridiculous. I know there is the "scale lineweights" box, but doesn't that just apply to when you change the plot scale?
You are using an assembly with many LODs. Each time you place a component in your assembly , that one will be active in all level of Details.For some configurations, you would like one component to be active in only one LOD. Inc.
View 9 Replies View RelatedI would like to make some sort of an "online" catalog where the engineers could review details, and just tell the draftsmen the details they would like to include in their design set. I'd be very interested in any system that you might use. We, at one time, used printed booklets for the engineers, but got to be a hassle when details changed. Is there a good software system that might make this an easy task?
View 4 Replies View RelatedI have a dwg file with three sheets in, just default names, I can access sheets 2 and 3 but get the attached errors when trying to access sheet 1 form either sheet 2 or 3
This file was originally created in IV2009 I've had no problems then or with the various conversions of it.
It seems to be memory related so here's the sitrep as for memory 8GB DDR2 RAM, and Virtual Memory set at min of 8192MB and a Max of 16384MB, I did have it set a systems managed but that gave a warning of low virtual memory with almost every drawing file that I opened.
How people deal with multiple revisions of one sheet with sheet set manager, basically I want the cover sheet of drawings to have a list of drawings including the revision letter and revision date and on each individual sheet keep track of historical revisions
There is the current sheet revision and date fields.Does everyone usually just update these and manually keep track of historical revisions else where in there title block?
I've been using Autocad for over 20 years. Any office I've ever worked in never used custom plot styles.
Can custom plot styles control lineweights of objects at different scales? For example, I have a floor plan drawn for 1/4" plotting the lineweights look fine. Now I want to print that floor plan at 1/8" but many lines now look darker than before. Can I create a plotstyle for the 1/8" scale to control the lineweights?
I would like to change our office template to have one text style and one dimension style that shows up at 1/8" tall text in any viewport scale. This would also include setting up the multiple global settings. Is this possible?
View 1 Replies View Relatedso in one drawing, the annotative scales of the objects are listed as 1" = 30' etc, and in the drawing i have them xref'ed into are 1:30. the only way i can get the annotative txt to show up is to make them non-annotative.
im assuming it has to do with the difference of 1:30 and 1" = 30'.
create a code to add scales to the scale’s list?
I just want to have the necessary scales, so don’t want to add to the template.
The command function is basically to allow me type the value of the scale and based on that, adjust the properties of the scale. (Name appearing in scale list - Paper Milimeters - Drawing Meters)
Example:
>Command line: setscale
>type the value of the scale to create: 50
set 1:50 to default
Details and sections signs in model/viewport modes,
In steel structure drawings, it is very common to have cross sections at particular locations as well as having details at specific joint.
I’m wondering if there is a way to have automation for
Having a sign (circular or rectangular) on the original drawing to show what each viewport represents on the model space (attached). This feature is already available (for example) in the ArcGIS software, i.e, each viewports is indicated by a sign on the original map to show where we are in that viewport
Having a cross section sign that represents at which location the cross section is taken (attached)
I’m not talking here about 3D model. All what I want is to show what each viewport represent on the mother drawing and also to show where the cross section is taken.
Attached screenshots
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am trying to understand how Linetype scale works, and have been researching on LTSCALE, MSLTSCLAE and PSLTSCLAE. I believe I have a fair understanding of each of these settings. Still, I can't figure out how the scaling works while I was trying to create custom line type. To illustrate, I created a new linetype called XCENTER, which is exactly the same line type as CENTER except its name, in a new LIN file.
*XCENTER,XCenter ____ _ ____ _ ____ _ ____ _ ____ _ ____
A,1.25,-.25,.25,-.25
After loading the new linetype into my drawing, I was surprised to see that CENTER and XCenter show up in different scales in the same drawing (see png).
My work file is WORK.DWG, I have purged everything except the two polylines, one with the line type of CENTER, the other xCENTER. Not that my global scale is 1:100, LTSCLAE=, MSLTSCALE=1, the object scales are both set to 1.0.
I copied the two lines to clipboard and pasted on a brand new drawing TEST.DWG, and the two lines show up in the same scale.
What in my original drawing WORK.DWG is causing this problem?
Deformation occurring when printing with different scales,
It is gorgeous that one can preserve the text size, hatch size, dimension size, etc. regardless the scale the drawing is going to be printed with.
For example, if the text size, hatch size, dimension size, etc. are proper as the drawing is printed with a scale of 1:100 then how about printing this drawing with a scale of 1/50 and 1/200?
A scale of 1:50 looks fine (attached)
A scale of 1:200 has some overlaps! (attached)
Then how to get a nice drawing (dimension size, text size, hatch size) when printing the drawing with a scale of 1/200? In other words, how the annotation objects can be adjusted proportionally such that no overlaps and distortion is occurred?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am having a problem opening older sheet sets from AutoCAD 2014.
I can select the .dst file, but when it "opens" I onlly have the icon in the seet set manager and nothing else, it is entirely blank.
I made a new sheet set, but now older versions of AutoCAD cannot read that one.
I am using AutoCAD 2013 and I working on a project of approxamitely 80 pages and I have a Sheet Set Manager set up.There are about 40 pages that have text saying Continuation on Sheet XX of YY. I managed to use a field for the total count (YY) however I need to link the XX to the another drawing. I have researched and failed miserably.
View 9 Replies View RelatedI'm trying to set up a title block template that will be used between several different sheet sets. I have entered the custom properties, then when I go to the title block and try to insert the fields with current sheet set custom the drop down box is empty and then when I try to type in the custom property name the link still does not function. Is there some trick that I'm missing, or is this function broken on AutoCad 2013?
View 6 Replies View RelatedI'm fairly new to Autocad and getting used to using sheet set manager. What I'm experiencing is, when you insert a model view it brings in an xref of that model, but i'm then unsure how to add additional xref models into the same view.
For example I have a separate ground floor plan file and OS data file which I want to show in the one sheet view without nesting the OS data to the original ground floor file.
Is there any way to cause Inventor to convert a multi-sheet IDW to an Autocaf DWG file that puts each IDW sheet on it's own tab in the dwg?
IDW ---Sheet 1, Sheet 2, Sheet 3, etc
DWG - Tabs for Sheet 1, Sheet 2, Sheet 3, etc ALL IN ONE DWG FILE
This so we can do batch printing and not have to maunually assemble dwg file with multiple tabs from the individual dwg files generated by Inventor - as near as I can tell, there is no way to get Inventor to NOT create a separate dwg for each sheet in the IDW???
Have created 3 sheet sets. Like to create a sheet set with all 3 and still keep the original 3 sheet sets.
View 2 Replies View RelatedI have a multi sheet drawing I am creating. My BOM is on the first sheet.
I have noticed that when I place views on my subsequent sheets, the balloons restart from item 1 again. Is there a way to link them to the BOM on sheet 1?
(Colossians 3:23-25)
I am trying to import a sheet with multiple drawings on it from AutoCAD to a sheet in Revit but when I do so all I get are the lines showing the AutoCAD sheet and the drawing labels but no actual drawings. I have done this before and can't figure what is going wrong. I have the import options set to color: black and white, levels/layers: specify and unit: inch. I also don't have AutoCAD on my workstation and it is a very large hotel project with hundreds of specific details and sheets that I do not want and do not have time to change or redo.
The DWGs I have are all set up as sheets and I don't have any individual details or drawings of the project not already set up as an AutoCAD sheet. I thought I could make the process simple by just importing the DWG sheet with all drawings to a Revit sheet at the correct scale, explode the layers, delete what I don't need and be done, this is NOT the case. Also I can get access to AutoCAD on another workstation after hours .
I recently added 2 monitors to my set up to bring my total to 3. I am trying to figure out the best way to work on one drawing, with 2 differant veiws on each of the 2 main screens.
I would like my main screen to have the plan view and the second monitor to have an isometric veiw (or whatever I need at the time) of the same drawing. Is there a way to have the same drawing opened up in another window, in one session of Autocad 2013. One on the main screen and one on the secondary.
How can I show two proposed alignments in one plan and profile sheet?
View 3 Replies View RelatedAny way in AutoCAD or a 3rd party app that will send multiple sheet sets to the plotter? Even better if it is possible using 'Page Setup Overrides'.
View 3 Replies View RelatedI am in the process of generating a separate package which is a suppliment to the main package for a project. The sheets from the suppliment will be incorporated into the main project, but many sheets from the main project will not be included in the suppliment.
My thought was to make a separate sheet set that shares layouts with the main set which I was able to do by making a copy and renaming the .DST file. Now I see that supposedly a single layout cannot exist in two sheet sets. I ended up working around this by creating a sheet in SSM with the same # and Name in each Sheet Set and was able to get them to appear in both. Want to find out if I'm creating a landmine of a problem down the road or if there is a better way to do what I'm doing. In the past, I beleive we simply selectively printed only the appropriate sheets but on that project it was cumbersome and at the scale of this project it will be worse.
How to open multiple sheets using sheet set manager? In our office we have some machines that do and some that don't. Is there a variable to change? I know its possible I just don't know how to do it.
View 9 Replies View RelatedI am trying to copy a layout tab inside an AutoCad file into a sheet set I created. All folders and sub folders are created and setup. What I need is to be able to copy the same layout under different sub folders inside sheet set manager.
To explain this better, I have a sheets set with all different departments inside our company (ex. CNC Dept., Bending, Machining, Welding, etc.). Some drawings have information for CNC, Welding and bending dept. Therefore I need to be able to copy the same drawing layout multiple times under each dept folder.
How can I do this? It only allow me to drag and copy the file once. I wont be able to drag it again under another folder.
