AutoCAD 2013 :: Deformation Occurring When Printing With Different Scales
Feb 27, 2013
Deformation occurring when printing with different scales,
It is gorgeous that one can preserve the text size, hatch size, dimension size, etc. regardless the scale the drawing is going to be printed with.
For example, if the text size, hatch size, dimension size, etc. are proper as the drawing is printed with a scale of 1:100 then how about printing this drawing with a scale of 1/50 and 1/200?
A scale of 1:50 looks fine (attached)
A scale of 1:200 has some overlaps! (attached)
Then how to get a nice drawing (dimension size, text size, hatch size) when printing the drawing with a scale of 1/200? In other words, how the annotation objects can be adjusted proportionally such that no overlaps and distortion is occurred?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 9 Replies
ADVERTISEMENT
Nov 7, 2012
I have a question about printing an autocad drawing. Currently I have two drawings on the model tab. I have drawn them both 1:1.
Now I need to print them both out on a same A3 paper, with different scales. The other one will be printed in 1:100 and the other in 1:50.
I have drawn a pretty good amount on autocad but this is my first time printing/plotting so I am asking for pretty specific instructions.
View 2 Replies
View Related
Nov 7, 2012
I have a question about printing an autocad drawing. Currently I have two drawings on the model tab. I have drawn them both 1:1.
Now I need to print them both out on a same A3 paper, with different scales. The other one will be printed in 1:100 and the other in 1:50.
I have drawn a pretty good amount on autocad but this is my first time printing/plotting.
View 6 Replies
View Related
Sep 10, 2013
I've been using Autocad for over 20 years. Any office I've ever worked in never used custom plot styles.
Can custom plot styles control lineweights of objects at different scales? For example, I have a floor plan drawn for 1/4" plotting the lineweights look fine. Now I want to print that floor plan at 1/8" but many lines now look darker than before. Can I create a plotstyle for the 1/8" scale to control the lineweights?
View 9 Replies
View Related
Oct 11, 2012
I would like to change our office template to have one text style and one dimension style that shows up at 1/8" tall text in any viewport scale. This would also include setting up the multiple global settings. Is this possible?
View 1 Replies
View Related
Jan 3, 2013
so in one drawing, the annotative scales of the objects are listed as 1" = 30' etc, and in the drawing i have them xref'ed into are 1:30. the only way i can get the annotative txt to show up is to make them non-annotative.
im assuming it has to do with the difference of 1:30 and 1" = 30'.
View 3 Replies
View Related
Oct 6, 2013
create a code to add scales to the scale’s list?
I just want to have the necessary scales, so don’t want to add to the template.
The command function is basically to allow me type the value of the scale and based on that, adjust the properties of the scale. (Name appearing in scale list - Paper Milimeters - Drawing Meters)
Example:
>Command line: setscale
>type the value of the scale to create: 50
set 1:50 to default
View 3 Replies
View Related
Oct 20, 2013
I am trying to understand how Linetype scale works, and have been researching on LTSCALE, MSLTSCLAE and PSLTSCLAE. I believe I have a fair understanding of each of these settings. Still, I can't figure out how the scaling works while I was trying to create custom line type. To illustrate, I created a new linetype called XCENTER, which is exactly the same line type as CENTER except its name, in a new LIN file.
*XCENTER,XCenter ____ _ ____ _ ____ _ ____ _ ____ _ ____
A,1.25,-.25,.25,-.25
After loading the new linetype into my drawing, I was surprised to see that CENTER and XCenter show up in different scales in the same drawing (see png).
My work file is WORK.DWG, I have purged everything except the two polylines, one with the line type of CENTER, the other xCENTER. Not that my global scale is 1:100, LTSCLAE=, MSLTSCALE=1, the object scales are both set to 1.0.
I copied the two lines to clipboard and pasted on a brand new drawing TEST.DWG, and the two lines show up in the same scale.
What in my original drawing WORK.DWG is causing this problem?
View 3 Replies
View Related
Jan 17, 2013
How you can have multiple details on one sheet but there are several different scales. Some are 3'-0"=1'-0", some are 1 1/2"=1'-0'. Then when you set up the sheet you just make different view ports. But i don't understand how you can draw them all in model space in difference scales.
View 2 Replies
View Related
Dec 4, 2013
when i copy paste this drawing from autocad architecture 2013 to another drawing it goes into that drawing in multiple scales
before after
I have checked all ins settings, I have tried to block it and unblock it, all items are there, some are just super small, some are normal.
View 3 Replies
View Related
Jan 20, 2013
I have a 2D pipeline layout. Nodes on the pipe are known by their X and Z coordinates. A FORTRAN written code calculated the nodes displacement in 2 direction of x and z.
I have to draw the nodes, connect them to each other to obtain pipeline layout and then draw the x and z deformations separately to show the deformed shape.
Input format is like
PN x y z
1 0 0 0
2 0 0 10
10 0 0 100
20 10 0 100
40 40 0 100
I though ACAD might be an easy tool to do this. I am trying to use MacLee's or Geobuilder's LISP routine to import the x and z coordinates into CAD.
MAcLee's routine doesn't recognize node numbers at the beginning. So I shifted into Geobuilder's rotine. Still I am trying to use but with no lock till now.
Any easier method for drawing these simple stuff, coordinates and deformation? Is it possible easily in ACAD? My other limitation is that ACAD is the only software I have in my hands.
View 4 Replies
View Related
Jun 6, 2012
I am looking forward to a CAD application that can simulate or show the end result of applying pressure to a plastic material. I have CAD drawings of EPDM Joints, Aluminum Sections and I want to simulate the action of glazing over the EPDM Joints, how the joints form is going to be transformed when the glazing is inserted in-between them i.e. a Window Sash.
How to do this type of simulation?
View 0 Replies
View Related
May 29, 2011
Draw a rectangle, circle, or inport image.
press alt, release
use moiusewheel, mousewheel + shift, and mousewheel + ctrl
the screen blanks out and does not respond. Until you press esc, or click elsewhere on the screen.
View 9 Replies
View Related
May 3, 2012
I upgraded from LR2 to 3 a while ago, and recently, I've had an odd problem opening my lightly edited files into CS4. I just do command E on my mac, and they open right into CS4. When the image(s) open, they almost seem completely desaturated? I shoot a nikon D700, raw, copy the NEF files into LR3 upon import, do light edits in LR (white balance, recovery, tone curve, some adjustment brush...) and then will open selected files into CS4 for futher tweaking. Why these images are doing this? If I go back into lightroom and "reset all settings" and then open, the images open fine.
Here is a screen shot showing the image in LR (left) and then how it opens in CS4.
I'm currently running version 3.6 of lightroom and 11.0.2 of CS4
View 4 Replies
View Related
Jan 30, 2013
When I use the web uploading feature to upload to a web gallery, a window pops up 90% through the upload saying 'an error occurred sending the file : an unknown error occurred.
View 1 Replies
View Related
Feb 8, 2004
Basically I'm trying to fake text in a book. I've attached a few images which basically outline my problem. At the moment I'm using a text path to deform my text, but it doesn't do the perspectival deformation on the text that I need. The "text deform" tool is too simplistic, it won't match up with the contour of the page properly. Something which sits mid-way between the two would be ideal, but failing that,
View 9 Replies
View Related
Nov 10, 2005
I was wondering whether in PS exists the following functionality:
you apply a 2d cage to your selection and then move the cage's control points to deform your selection. much like a FFD modifier in 3ds max, the only difference being that it is applied to a 2d image instead of a 3d mesh.
maybe some PS plugin does this?
i use PS 7.
View 4 Replies
View Related
Feb 23, 2014
when i rotate any part mesh is deformating, for example when i rotated with arms, mesh on legs was deformating..
[URL]
View 2 Replies
View Related
Oct 8, 2012
How do I prevent PSE 9 from creating and displaying multiple copies of a given slide ? I have not asked for or made copies yet I often find multiple copies of a given slide, sometimes as many as 20 or 30. It's very annoying when trying to edit slides.
View 7 Replies
View Related
Jul 16, 2012
I'm trying to simulate metal deformation. To achieve a realistic metal denting I'm trying to use Cloth. The problem is though, whatever settings I try, my cloth-box collapses from itself. My question is; how can I set cloth up so that it can be as strong as metal, and only deform when I drop an object on it (that's where the denting comes in)?
View 7 Replies
View Related
Jul 27, 2011
I build the bones for my character, but when I move the bones the body deformates, how to eliminate this annoying thing?
View 2 Replies
View Related
Jul 19, 2012
I just came across this problem in this version of Autocad 2013. I am trying to print my company logo into a PDF from autocad 2013 and it does but when i go open the PDF file it has lines all over it nothing is solid like the dwg file. i done this in all other versions of Autocad and it printed find to PDF and everythig was solid with no lines all over the PDF.
View 9 Replies
View Related
Nov 16, 2011
when opening a .iam file i get the Error:
FATAL ERROR: Schema Migration occurring without Schema Version change. Migration: RSeRevisionHistory Schema
Inventor 2012 Professional SP1 64-Bit
Windows 7 64-Bit
View 1 Replies
View Related
Apr 17, 2013
acad 2014 will not plot as a pdf. it will plot to the HP plotter with no trouble. but cancels out the pdf. get error message no "startdocprinter" mesage.
View 9 Replies
View Related
Apr 17, 2013
Two choices for print pdf files: DWG to PDF.pcs or Adobe PDF.pc3.
What is the difference other than the first one can create layer info in the printed files.
View 4 Replies
View Related
Nov 14, 2013
So if I am in a layout page and I plot the sheet directly to our printer the drawing comes out to scale.However if I plot to PDF using DWG to PDF.pc3, and then print to printer it is always slightly smaller around 10% to 15% smaller.
View 5 Replies
View Related
Jan 10, 2013
im having a hard time with the text when printing. it somehow prints texts that looks like it is outlined. i have copied and pasted texts from other documents into this document and it still does not work. i also have tried copying this specific text into other documents and that drawing prints out fine.
View 1 Replies
View Related
Oct 26, 2013
Why when I print 8.5x11 to PNG at 300dpi (paper size 2550x3300) the actual image dim’s are 34.38”x26.56”? If I print with the paper size at 612x792 (72dpi) the image will be 8.5x11 but look like poop.
how can I print 8.5x11 to PNG at 300dpi and the image dim's be 8.5x11?
View 6 Replies
View Related
Jul 18, 2013
I have a drawing and I have to show the critical points printing the coordinates in the screen:
Is there a way that AutoCAD create text with the coordinates that I can capture with any (ID for example) command?
View 1 Replies
View Related
Jun 25, 2013
My Autocad 2014 crashes EVERYTIME after printing to PDF. What could be causing this problem? Never had this problem with my older 2012 on the same computer.
View 9 Replies
View Related
May 21, 2013
my autocad not printing straight line, everything look fine in PDF or autocad , but once I printed out my work the line not straight.
Version: Autocad 2013
View 2 Replies
View Related
