My company have created a standard cui that we all must use and cannot be changed in any way.
Whilst I agree this is a good idea, there are a lot of command icons missing from the ribbon which I use frequently.Is there any easy way I can add these to my cad setup ?
I created the gear (helical) in the attached file using the standard gear tool in inventor. The problem is how do i then find the mass moment of inertia of it using Inventor?
View 1 Replies View RelatedI have created the part based on piece of standard angle taken from library. Now I want to make a mirrored copy of this part by Component-Mirror.
Inventor does not let me do it with standard part.
The question is: How I can transform a standard part to normal one, I mean I could get rid of belonging to standard part? Making a copy does not work. The only way is to derive and mirror this part but I wish there could be easy way.
The usual import menue has the options for importing on the right hand side. My system is now showing an import dialouge box and the import dialouge on the right is greyed out. How do I get back to the standard import screen.
View 2 Replies View RelatedI have an assembly that was created on 64 bit version of Inventor 2013, the total file size of everything is around 150MB. Even if I use 'Pack and Go' to move the file to another computer running the 32 bit version I get an error when I try to open it which says something like:
'unable to allocate 3GB memory for FBAttributeSegment'
The actually figure is over 3GB but of course on a 32 bit version of windows it is physically impossible to allocate that amount of memory (even with the /3GB in boot.ini hack)
I've performed various dynamic simulations as well as animations within the assembly so I'm thinking that perhaps its trying to allocate that huge amount of memory for a saved state of one of those.
What FBAtributeSegment might be and whether there is any special way to save an assembly to avoid this problem? The name FBAttributeSegment doesn't correspond to any part or assembly names.
I should also add that I have no problem opening it in a 32 bit version of Fusion which again suggests to me that it is something like simulation or animation that is causing this
I would like to make some sort of an "online" catalog where the engineers could review details, and just tell the draftsmen the details they would like to include in their design set. I'd be very interested in any system that you might use. We, at one time, used printed booklets for the engineers, but got to be a hassle when details changed. Is there a good software system that might make this an easy task?
View 4 Replies View RelatedWith reference to the standard hydraulic symbols which are contained within the library in Autocad 2013,
To which standard they conform i.e. : ISO 1219-1 ?
There are different results when executing polar array using the 'classic' method and the array using ACAD's standard array. I tend to revert back to the classic array as I find this more user friendly and tend to use this one over the standard ACAD array. Which methods are preferred by other CAD users ? I was wondering if any other CAD users prefer any other 'classic' functions over the standard ones. I sometimes use 'classiclayer' as well because of a display issue, not sure if this is a common bug that other users have found too ?
View 8 Replies View RelatedWhen I first time use AutoCAD 2013, my Properties toolbar can be displayed by right-clicking at the pull-down menu at click on the properties. But now I could not find the properties option anymore after right-clicking at the pull-down menu. get back my properties toolbar displayed in my AutoCAD 2013.
View 6 Replies View Relatedwhen i start with the dynamic simulation i found out that there isnt any option of revolute or prismatic or anyother standard joints.. just hv spacial joints under that session... have did almost all the updates and no use.. still remains the same...
View 1 Replies View Relatedim trying to do is print on standard 8.5" X 11" paper but for some reason it keeps cutting off the top and the bottom. ive tried changing the plotter settings around but to no avail. its like theres a certain amount that it refuses to pring on the bottom. no matter what, the is always a .5" gap at the bottom. i can get it to print to the very edge of the top. just having issues with the bottom. ive also tried using plot calibration and all of that is fine
See photo for what im getting. and yes its doing it when i make pdf's too.
In 2013, glass density is 2.18 g/cm^3. But in older versions, we had that as 2.56 g/cm^3 for many years. Google results range between 2.5 to 2.6 g/cm^3. Why 2013 has much lower value?
View 2 Replies View Relatedunder options / files / printer support file path / plot style table search..I changed the location to a different place on my c drive and I get the autocad warning.
View 9 Replies View RelatedI have been searching for a variation of the AR-B816 standard hatch pattern for a while with no luck. I would like the same 1:2 ratio only in a stacked bond, not running.
View 4 Replies View RelatedI added a .PAT file to the 'support file search path' in order to use a custom hatch pattern. (Im using AutoCAD LT 2012)
In the process it has deleted all of the predifined hatch patterns and the custom one did not work either. So now I have ZERO hatch patterns.
How do I get the predefined hatches back?
How do I get the large Hatchwindow /Dialogbox as standard? I mean, without rightclick - settings.
View 2 Replies View RelatedCan I create a template with layers/linetypes that I would most often use
View 2 Replies View RelatedSo there seems to be a problem with the multi body part functions in 2013.
Once you create a multi body, or a multi body feature, and then try to go back and edit it you can no longer select difference bodies.
A little more digging and it almost seems like the problem is that you can not use "ctrl" to multi select bodies.
Inventor Pro 2014 SP1
Vault Pro 2014
Windows 7 x64
2.53 Xeon
Quadro FX 3800
24GB RAM
I have few text labels and lines in a drawing that supposed to have black color.
However, color at some point changed to grey.
Color- by layer, transparency- by layer, viewstyle- 2D Wireframe...
The thing is if I double click on a text it turns to black but after regenall it turns to grey again!
Already did restart and everything. Looks like there is maybe some variable for color control, I don't know.
Annotative block moves when annotation scale changed,
The solution for this problem is mentioned in the link below but sounds not to be useful:
[URL]....
I got a block that contains an attribute (attached) and created on layer zero while the current annotation scale is 1:100. As this annotation scale is changed (say to 1:200 or 1:50) this block moves from its original place to another one (as shown in the attached screenshots).
We have just recently install Building Design Suite Standard 2014 and the tool palettes DO NOT work.
Clicking on the standard palettes that load with ACAD will not even work. We have also tried to make new ones and the will not MAKE (for lack of words).
Here is the Autocad warning it gives us:
Unable to execute the tool. Possible causes are:
-The tool is not registered properly. Please check your installation.
-the tool is from another application and is incompatible with the current application.
We are running a new copy and it IS registered.
I have a drawing that seems to be creating a line when the drawing is PDF'd. i have purged, Audited and recovered the drawing and the unbound xref files. The line does not appear in any preview nor in model/paper space. attached is a screenshot of the pdf file.
View 2 Replies View RelatedThe dwg is created in AutoCAD LT 2013. i am unble to open the dwg in AutoCAD 2013. Tried recover, wblocked it. Still does not work. Service pack is applied for AutoCAD 2013.
View 8 Replies View RelatedWhen I open a file in ACAD2013/ACAD2013LT I can't see some XREFs created in ACAD2012LT. XREF command cannot resove it either. It will show path correctly.
View 7 Replies View RelatedWhen using Layout/baseview/section tool, you end up with paper space views of the model so that when you go to dimension the view, you get the paper dimension, not the model dimension. How can I change this behavior?
View 4 Replies View Relatederror messages that say I can't use various functions because the file has objects from a newer version. I have ACA 2012 and the file is from ACA 2013.
Isn't there a way to convert or eliminate these 'objects' so I can use these files 'normally' in 2012 ACA?
Our office created a library of blocks for use in our dwgs in the early days of Autocad. Since installing MEP2013 when inserting the blocks many of them have mysteriously changed from inches to millimeter units. We have to go back to each block(dwg) and change the units and rescale the blocks. We upgraded from MEP2012 and they were working fine.
View 4 Replies View RelatedThe new VIEWBASE tool(s) are pretty cool but I have noticed that the solid objects in the viewports that are created by VIEWBASE tool/command display and plot pixelated. I have changed many normal settings like VIEWRES, WHIPARC, ISOLINES... without any improvement. I did notice that there is a property in the property palette called "Shade Resolution" that I am wondering if it might control this setting. The only thing is that I can't change its value from the properties palette.
I did compare the difference between a normal viewport and one that is created by the VIEWBASE command and the normal viewports display the objects smoothly (see the last picture below)
1) How to fix the pixelation issue?
2) Does this property control the pixelation issue?
3) How do you change this prop
Is it possible to attache a PCG file created with ACAD 2013 in ACAD 2012? I ask because I keep getting the message "the point cloud data file is not valid!". I have tried using both x86 and x64 and get the same error. I have also tried with ACAD 2011 and get the same error. The file was created from a Leica PTS file.
View 2 Replies View RelatedI have been using Inventor 2013 for a few weeks now and for the life of me I can not work out how to turn off the automatic "Edit dimension when created" .
I do know that there are "Edit dimension when created" checkboxes in both the Edit Dimension window and under Application Options. But everytime I restart Inventor, the program seems to forget that particular custom setting and always switches "Edit dimension when created" back on. So that on the first dimension I create, the Edit Dimension window pops up.
For additional info Inventor remembers many of the other custom settings (e.g. compact tool bar, active button on the Quick Access Toolbar, etc...)
I created a library of Dynamic cabinets in AutoCAD LT 2013. I have tested them and used them in drawings. I just upgraded to 2104 and when I insert those same dynamic blocks into a drawing, the parameters do not show and i can not use the dynamic block as intended. when I click on it...tons ot grips show up and no parameters.
View 2 Replies View Related
