AutoCAD 2010 :: The Standard Scale List Is Missing Completely
Sep 6, 2012
I cannot find the Standard Scale list anywhere in my 2010 version of AutoCAD. Only the Annotative Scale list is visible and usable. Note: it's not that certain scale values are missing, it's that the entire Standard Scale function is no where to be found!
I need to be able to change the scale of a viewport, but the Standard Scale list is not included as an option in the Properties Dialog box, nor is it in any of the other suggested places where it should be. I've used the Standard Scale list many times before in previous versions of CAD and from everything I can tell 2010 should have it.
View 1 Replies
ADVERTISEMENT
May 2, 2012
Is there a way to modify the DEFAULT SCALE LIST to show a metric scale list in an imperial template? I mean, I start a drawing using the imperial template, but i want to use the standard metric scales on paper space. on previous versions the scale list shown both imperial & metric. Now it depends of what the template is using.
View 1 Replies
View Related
Feb 7, 2013
My scale list has metric list on it as it suppose to have both metric and imperial scale.
Screen shot..
View 2 Replies
View Related
Jan 31, 2012
I am trying to create a new scale for a view port, but when I select custom, the Scale List Edit box is missing. I have created a custom scale before and never had this problem. Autocad acts as if the box is open because I cannot do anything with the drawing, I must hit Escape to get back to it .
View 3 Replies
View Related
Nov 25, 2009
My viewport scale list only has metric and I would like to add a list of imperial scales for general use. So far I can only add, through Annotation Scaling panel and Scale list for an individual drawing so once it is closed I lose the scales.
how do I list my imperial scales permanently for use throughout the program.
I'm on Autocad 2010.
View 7 Replies
View Related
Dec 17, 2012
I can't find the correct location to put the files from the scale list cleanup utility in 2012.
I know it's supposed to go in the default installation directory but it doesn't seem to be working in any folder for 64bit.
View 1 Replies
View Related
Nov 7, 2012
Custom Hatch list in ACA 2013 (64 bit win 7) shows the list of hatches in a completely random order..ie. not alphabetical.
View 9 Replies
View Related
Sep 6, 2013
AutoCAD 2013 2D - when scrolling the viewport scale list, the viewport zooms with each scale instantly.
View 1 Replies
View Related
Apr 10, 2013
I would like to find a lisp that changes the scale of something that has an annotative scale and deletes all other scales in the object scale list. Often i have many different scales of existing dimensions or objects. i waste a lot of time opening the annotation object scale dialogue box, selecting add, finding my scale and deleting the old scale.
View 3 Replies
View Related
Feb 9, 2012
I have imported a ISO Shipping container but the scale is to large. How can I scale it down to architecture setting standard not metric. When I try to use the scale option all it does is makes it larger? I have not search yet do to time restrictions.
View 4 Replies
View Related
Jan 22, 2013
The properties palatte has both these scales listed. In theory, they can be different.I would love to be able to plot my drawing at 1:1000 with the civil objects & labels scaled to 1:500 so they don't overwhelm the plan. It would seem I should be able to simply set the viewport to have a standard scale of 1:1000 and annotation scale 1:500 and be done. But it doesn't work. It will always scale the annotative objects to the standard scale.
My workaround is to scale my sheet double size and plot it half size, to trick the Civil objects & labels.
View 2 Replies
View Related
Jul 24, 2013
I click on viewport and properties but Standard scale does not show up on Properties Misc.
View 9 Replies
View Related
Sep 20, 2012
Can I create a template with layers/linetypes that I would most often use
View 2 Replies
View Related
Jan 23, 2012
I first installed 2012, then I realized that my class will be using 2011. I downloaded 2011, and kept my 2012, and it didn't seem like there would be any issues. So I open my 2011 and it keeps crashing before it loads completely. There are no error messages or anything ...2012 works just fine. I tried doing a repair, and a reinstall.
View 2 Replies
View Related
Jan 7, 2013
When I first time use AutoCAD 2013, my Properties toolbar can be displayed by right-clicking at the pull-down menu at click on the properties. But now I could not find the properties option anymore after right-clicking at the pull-down menu. get back my properties toolbar displayed in my AutoCAD 2013.
View 6 Replies
View Related
Dec 9, 2012
when i start with the dynamic simulation i found out that there isnt any option of revolute or prismatic or anyother standard joints.. just hv spacial joints under that session... have did almost all the updates and no use.. still remains the same...
View 1 Replies
View Related
Aug 15, 2012
I've been having a problem with my AutoCAD LT 2010 completely deleting files after I have saved them and closed them. There is no file in the recovery manager, no back up file, nothing. It has happened three times without warning and it always happens to files I've been working on for awhile and have opened and closed multiple times. Is there any way to recover these files and how do I keep it from happening again?
View 1 Replies
View Related
Apr 24, 2013
I loaded a linetype (.lin file) in ACAD 2010 and it came out wrong. I would like to permanently remove it from ACAD(where it cant be seen when you go to load another type of line), how do you do that?
View 7 Replies
View Related
Jun 21, 2012
Is there a complete list of what all the "GPU features" in Photoshop 13 Standard are? I had posted this in another thread, but I'll just move my query to this new thread:
Chris Cox wrote:It will run, but none of the GPU features (including 3D) will work…
Is there a listing or description of what all those "GPU features" are? It would be of great interest to all of us who are stuck—temporarily or permanently—on such unsupported systems, regardless of platform.
This is on a maxed-out in every sense, unupgradeable MacBook on which ACR 7.1 hosted by Photoshop CS6 Standard is running just fine.
View 6 Replies
View Related
Feb 20, 2014
Yellow Scale Triangle is missing when i click on scale in 3DS Max 2014. i saw it earlier on the screen, but now it is gone. all the scale tool does is move the object up or down. (no matter what axis i move it.)
did i press something or this is a glitch in the program?
View 2 Replies
View Related
Jun 27, 2012
We have recently noticed that after printing a PDF of a drawing I plotted from AutoCAD we are coming up with differences when we double check the scale on the printed hardcopy using a carpenter ruler.
For example, there is a dimension labeled on the drawing of 200 ft. However, if I try to scale this out with a carpenter's ruler at the drawing was set to (say for instance it is 1 inch = 100 ft) I am coming up short of the 2 inches it should be (typically come up around an 1-15/16" or around 194 feet, approx 97% of the correct amount).
In the Page Setup Manager in AutoCAD, I have the following options selected (see the print screen as well):
Printer/plotter selected: DWG to PDF.pc3
Paper Size: ANSI full bleed B (11.00 x 17.00 Inches)
What to Plot: Layout
I don't have a plot scale scale other than the default 1" = 1'
No plot style selected
Then, on the print menu when I open the PDF that I have exported from AutoCAD, I have the following settings (see the print screens I have attached):
Printer: The printer I use (Konica Minolta c650 Series PCL)
And I have selected the Options "Auto Rotate and Center" and "Choose paper source by PDF page size**"
** Note, that I have tried unselecting the "Choose paper source by PDF page size" option and accordingly changed the paper size in the "Page Setup..." button at the btoom to match the document size (i.e. 11.0 x 17.0in) and it gets the difference to be closer (i.e. I now get 198 ft but some of my border gets cut off). See the print screen below for this a print screen of the print menu and sub-menu of Page Setup showing the paper size selected.
I saw that some people in other forums state that there is no real solution when trying to scale off of PDF's and that there should be a disclaimer saying as much if you are to send the file out to a customer who may rely on doing some in the field scaling from the printed copy of the PDF file. I find it hard to believe there is no solution as we have received some drawings from others whom the scaling works just fine.
View 3 Replies
View Related
Mar 15, 2011
I work in autocad 2010 and I draw in scale 1:1 . What an annotation scale is, moreover I have never used annotative objects in my drawings.
Nonetheless, when I try to plot a drawing, while I am in the model view, I choose the scale in mm/units, I select the plot area and when I press preview or plot, I get the message THE ANNOTATION SCALE IS NOT EQUAL TO THE PLOT SCALE. DO YOU WANT TO CONTINUE?
I press yes, I print it and the outcome is always a bit smaller than it should be.
When i am in the layout mode and I try to plot, I dont get this message. But I dont know how scaling works in this case. For example I want to plot in a A4 paper, scale 1:100. So I type 1000mm/100units, as I did in the model mode, but the result is wrong.
View 3 Replies
View Related
Jan 12, 2012
recently upgraded to a new stand alone LT 2012 on brand new machine.I only work in metric millimeters. When I open a new drawing and set up a viewport on a new layout tab the viewport scale list is as one would expect i.e. 1:1 1:2 1:4 1:5 1:10 1:25 1:50 etc etc
when I open an existing drawing I only have the option of imperial scales i.e. fractions. I have tried simply adding the most commonly used scales to the list but once the drawing is saved and closed, they have disappear when reopened.
View 9 Replies
View Related
Jul 29, 2013
I have tried to find if my problems has already been addressed but cannot find any reference.I am adding a value to the scale list in 2012. The list goes from 1:20 to 1:30 and I want 1:25.
When I add in the drawing it is still there in subsequent edits. When I create or edit another drawing the value is not in the list!!
Is the viewport scale list default needing to be edited elsewhere for it to become a global change because no matter what I try it only stays resident in drawings I edit the viewport scale list!
View 1 Replies
View Related
Oct 14, 2011
I am having some issues with autocad 2012.
When i got to my layout page and attempt to change the scale of my layout space i am given scales in fractions or decimals which i am not accustomed to.
When I click on the custom option from the pop up menu with the scales autocad freezes.
i havnt hard a chance to test this out on my desktop but it is causing issues on my laptop.
View 3 Replies
View Related
May 2, 2011
I've been working on fixing our metric template at work, and there's a drawing scale that I can't figure out to delete. I can rename it, but can't edit or delete it.
The drawing is empty, there's only layers, dim style, text style and multi leader style and a few block. I've tried purging everything and I still can't delete it.
View 3 Replies
View Related
Nov 27, 2013
I can add the SNCL-MMG tab in all the standard Workspace.
After that I save in a new profile.
In this computer it's ok.
My custom CUI is an Enterprise CUI.
But when I go to another computer and install my custom menu using my profile saved.
I didn't see the tab I need in all standard Workspace.
Autocad add my custom workspace and everything is fine on my custom workspace.
View 9 Replies
View Related
Jan 28, 2013
Having trouble finding the correct place to put the FEET, INCHES, METRIC, custom scales in the registry. I'm not sure if its any of the following or is it somewhere else now?
[HKEY_LOCAL_MACHINESOFTWAREAutodeskAutoCADR19.0ACAD-B000:409
[HKEY_LOCAL_MACHINESoftwareAutodeskAutoCADR19.0ACAD-B000:409AEC7.0AecBase70Scales
[HKEY_CURRENT_USERSOFTWAREAutodeskAutoCADR19.0ACAD-B000:409
[HKEY_CURRENT_USERSoftwareAutodeskAutoCADR19.0ACAD-B000:409AEC7.0AecBase70Scales
Civil 3D x64 2012
Win 7 x64 Ultimate
I7 3820 (3.6ghz quad core with HT)
32gig RAM (Corsair XMS3 4x8g)
Intel x z79 mobo (BOXDX79TO 2011 socket)
Radeon HD 7850 2gb GDDR5
View 5 Replies
View Related
Jul 17, 2013
direction of where the DEFAULT SCALE LIST is stored in the C: drive?
I have set it up in the option tab and all is working, but will soon be installing several new PC's with AC and want to drop the stored file straight into the new PC's rather than having to type them out one by one on each PC.
View 9 Replies
View Related
Sep 18, 2012
before when reset scale it will have 1:1000, 1:2000, something like that.
now when reset it is same as autocad. which is like 1:1 (should be 1000), 1:2 (should be 2000)
what changed? i know it's just the name but this is bad. shoudln't change something like this all the sudden. hopefully is some variable.
working in metric.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 6 Replies
View Related
Oct 21, 2011
i m new in auto cad 2010 i today i face new problem i dont this is what? the message is that " the drawing contains a large number of annotation scales do u want to reset the scale list? "
View 2 Replies
View Related
